Random Access Career Sense Protocol: A Comparative Analysis of Non Persistent and 1 Persistent CSMA

In this paper we discussed the simulation based comparative analysis of two random access carrier sense protocol ie. Non persistent CSMA and 1 persistent CSMA in wireless network taking considering of random back off algorithm. The feedback comparison of both protocols compared with respect to load on medium utilization and average waiting time. Both results are demonstrated in different load conditions

On the Medium Access Control Protocols Suitable for Wireless Sensor Networks – A Survey

A MAC (Medium Access Control) protocol has direct impact on the energy efficiency and traffic characteristics of any Wireless Sensor Network (WSN). Due to the inherent differences in WSN’s requirements and application scenarios, different kinds of MAC protocols have so far been designed especially targeted to WSNs, though the primary mode of communications is wireless like any other wireless network. This is the subject topic of this survey work to analyze various aspects of the MAC protocols proposed for WSNs. To avoid collision and ensure reliability, before any data transmission between neighboring nodes in MAC layer, sensor nodes may need sampling channel and synchronizing. Based on these needs, we categorize the major MAC protocols into three classes, analyze each protocol’s relative advantages and disadvantages, and finally present a comparative summary which could give a snapshot of the state-of-the-art to guide other researchers find appropriate areas to work on. In spite of various existing survey works, we have tried to cover all necessary aspects with the latest advancements considering the major works in this area

Medium access control design for all-IP and ad hoc wireless network

Medium Access Control (MAC) protocol in a wireless network controls the access of wireless medium by mobile terminals, in order to achieve its fair and efficient sharing. It plays an important role in resource management and QoS support for applications. All-IP wireless WAN is fully IP protocol-based and it is a strong candidate beyond 3G (Third Generation Wireless Network). Ad hoc wireless network has recently been the topic of extensive research due to its ability to work properly without fixed infrastructure. This dissertation is composed of two main parts. The first part pursues a Prioritized Parallel Transmission MAC (PPTM) design for All-IP Wireless WAN. Two stages are used and each packet is with a priority level in PPTM. In stage 1, a pretransmission probability is calculated according to the continuous observation of the channel load for a certain period of time. In stage 2, a packet is prioritized and transmitted accordingly. It is modeled and analyzed as a nonpreemptive Head-Of-the-Line prioritized queueing system with Poisson arrival traffic pattern. Its performance is analyzed under three other traffic patterns, which are Constant Bit Rate, Exponential On/Off, and Pareto On/Off, by using a NS-2 simulator, and compared with that of Modified Channel Load Sensing Protocol. PPTM supports dynamic spread code allocation mechanism. A mobile terminal can apply for a spreading code according to the current channel condition. To use the idea of dynamic bandwidth allocation in PPTM for adhoc wireless network, a Dynamic-Rate-with-Collision-Avoidance (DRCA) MAC protocol is proposed in the second part of the dissertation. DRCA is based on spread spectrum technology. In DRCA, a terminal sets the spreading factor for a packet according to the activity level of neighboring nodes. If the total number of usable spreading codes with this spreading factor is less than the total number of mobile terminals in the network, to avoid collision, the spreading code id is broadcast such that other terminals can avoid using it when the packet is being transmitted. The performance of DRCA is theoretically analyzed in a slotted, single-hop, multi-user environment. To evaluate DRCA\u27s performance in an environment closed to a real one, a simulator that supports multi-hop, random mobility pattern is created with OPNET. Both theoretical and simulation results show that DRCA outperforms MACA/CT (Multiple Access with Collision Avoidance with Common Transmitter-based) in case if there are more than one communication pair and the ratio of inactive mobile terminals to active ones is high

An efficient multichannel wireless sensor networks MAC protocol based on IEEE 802.11 distributed co-ordinated function.

This research aimed to create new knowledge and pioneer a path in the area relating to future trends in the WSN, by resolving some of the issues at the MAC layer in Wireless Sensor Networks. This work introduced a Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks. This work commenced by surveying different protocols: contention-based MAC protocols, transport layer protocols, cross-layered design and multichannel multi-radio assignments. A number of existing protocols were analysed, each attempting to resolve one or more problems faced by the current layers. The 802.15.4 performed very poorly at high data rate and at long range. Therefore 802.15.4 is not suitable for sensor multimedia or surveillance system with streaming data for future multichannel multi-radio systems. A survey on 802.11 DCF - which was designed mainly for wireless networks –supports and confirm that it has a power saving mechanism which is used to synchronise nodes. However it uses a random back-off mechanism that cannot provide deterministic upper bounds on channel access delay and as such cannot support real-time traffic. The weaknesses identified by surveying this protocol form the backbone of this thesis The overall aim for this thesis was to introduce multichannel with single radio as a new paradigm for IEEE 802.11 Distributed Coordinated Function (DCF) in wireless sensor networks (WSNs) that is used in a wide range of applications, from military application, environmental monitoring, medical care, smart buildings and other industry and to extend WSNs with multimedia capability which sense for instance sounds or motion, video sensor which capture video events of interest. Traditionally WSNs do not need high data rate and throughput, since events are normally captured periodically. With the paradigm shift in technology, multimedia streaming has become more demanding than data sensing applications as such the need for high data rate protocol for WSN which is an emerging technology in this area. The IEEE 802.11 can support data rates up to 54Mbps and 802.11 DCF was designed specifically for use in wireless networks. This thesis focused on designing an algorithm that applied multichannel to IEEE 802.11 DCF back-off algorithm to reduce the waiting time of a node and increase throughput when attempting to access the medium. Data collection in WSN tends to suffer from heavy congestion especially nodes nearer to the sink node. Therefore, this thesis proposes a contention based MAC protocol to address this problem from the inspiration of the 802.11 DCF backoff algorithm resulting from a comparison of IEEE 802.11 and IEEE 802.15.4 for Future Green Multichannel Multi-radio Wireless Sensor Networks

The Design of Medium Access Control (MAC) Protocols for Energy Efficient and QoS Provision in Wireless Sensor Networks

This thesis work focuses on innovative design of media access control (MAC) protocols in wireless sensor networks (WNSs). The characteristics of the WSN inquire that the network service design considers both energy efficiency and the associated application requirement. However, most existing protocols address only the issue of energy efficiency. In this thesis, a MAC protocol has been proposed (referred to as Q-MAC) that not only minimized the energy consumption in multi-hop WSNs, but also provides Quality of Service (QoS) by differentiating network services based on priority levels prescribed by different applications. The priority levels reflect the state of system resources including residual energy and queue occupancies. Q-MAC contains both intra- and inter- node arbitration mechanisms. The intra-node packet scheduling employs a multiple queuing architectures, and applies a scheduling scheme consisting of packet classification and weighted arbitration. We introduce the Power Conservation MACAW (PC-MACAW), a power-aware scheduling mechanism which, together with the Loosely Prioritized Random Access (LPRA) algorithm, govern the inter-node scheduling. Performance evaluation are conducted between Q-MAC and S-MAC with respect to two performance metrics: energy consumption and average latency. Simulation results indicate Q-MAC achieves comparable performance to that of S-MAC in non-prioritized traffic scenarios. When packets with different priorities are introduced, Q-MAC yields noticeable average latency differentiations between the classes of service, while preserving the same degree of energy consumption as that of S-MAC. Since the high density nature of WSN may introduce heavy traffic load and thus consume large amount of energy for communication, another MAC protocol, referred to as the Deployment-oriented MAC (D-MAC)has been further proposed. D-MAC minimalizes both sensing and communication redundancy by putting majority of redundant nodes into the sleep state. The idea is to establish a sensing and communication backbone covering the whole sensing field with the least sensing and communication redundancy. In specific, we use equal-size rectangular cells to partition the sensing field and chose the size of each cell in a way such that regardless of the actual location within the cell, a node can always sense the whole cell and communicate with all the nodes in neighboring cells. Once the sensing field has been partitioned using these cells, a localized Location-aware Selection Algorithm (LSA) is carried out to pick up only one node within each cell to be active for a fixed amount of period. This selection is energy-oriented, only nodes with a maximum energy will be on and the rest of nodes will be put into the sleep state once the selection process is over. To balance the energy consumption, the selection algorithm is periodically conducted until all the nodes are out of power. Simulation results indicated that D-MAC saves around 80% energy compared to that of S-MAC and Q-MAC, while maintaining 99% coverage. D-MAC is also superior to S-MAC and Q-MAC in terms of average latency. However, the use of GPS in D-MAC in identifying the nodes within the same cell, would cause extra cost and complexity for the design of sensor nodes

Hybrid DES-based Vehicular Network Simulator with Multichannel Operations

Vehicular Ad-hoc Network (VANET) is considered to be a viable technology for inter- vehicle communications for the purpose of improving road safety and efficiency. The En- hanced Distribution Channel Access (EDCA) mechanism and multichannel operations are introduced to ensure the Quality of Service (QoS). Therefore, it is necessary to create an accurate vehicular network simulator that guarantees the vehicular communications will work as described in the protocols. A comprehensive vehicular network simulator should consider the interaction between mobility models and network protocols. In this dissertation, a novel vehicular network simulation environment, VANET Toolbox, designed using discrete-event system (DES) is presented. The APP layer DES Module of the proposed simulator integrates vehicular mo- bility operations with message generation functions. The MAC layer DES module supports single channel and multichannel EDCA operations. The PHY layer DES module supports bit-level processing. Compared with packet-based simulator such as NS-3, the proposed PHY layer is more realistic and accurate. The EDCA scheme is evaluated and compared with the traditional Carrier-Sensing Mul- tiple Access (CSMA) scheme, with the simulations proving that data with different priorities can coexist in the same channel. The multichannel operation for the EDCA scheme is also analyzed in this dissertation. The multichannel switching operation and coordination may cause packet dropping or increased latency to the communication. The simulations show that with heavy network traffic, multichannel communication performs better than single channel communication. From the perspective of safety-related messages, the multichannel operation is able to isolate the interference from the non-safety messages in order to achieve a better packet delivery rate and latency. On the other hand, the non-safety messages can achieve high throughput with reasonable latency from multichannel communication under heavy load traffic scenario

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs