Design criteria of a transcutaneous power delivery system for implantable devices.

Implantable cardiac assist devices such as artificial hearts and blood pumps are a rapidly growing therapy used for treating moderate to severe congestive heart failure. While current treatments offer improved heart failure survival and increased patient functionality with enhanced quality of life, powering these devices are still constraining. In practice, percutaneous cables passing through skin are used for power and control data transmission requiring patients to maintain a sterile dressing on the skin cable-exit site. This contact site limits patient movement as it is vulnerable to wound infection due to trauma and poor healing. As a result, a sterile dressing has to be maintained and nursed regularly for treating the wound. Complications from the exit site infections are a leading cause of death in long-term support with these devices. Wireless power and control transmission systems have been studied and developed over years in order to avoid percutaneous cables while supplying power efficiently to the implanted device. These power systems, commonly named Transcutaneous Energy Transfer (TET) systems, enable power transmission across the skin without direct electrical connectivity to the power source. TET systems use time-varying electromagnetic induction produced by a primary coil that is usually placed near skin outside the body. The induced voltage in an implanted secondary coil is then rectified and regulated to transfer energy to an implanted rechargeable battery in order to power the biomedical load device. Efficient and optimum energy transfer using such transcutaneous methods is more complex for mobile patients due to coupling discrepancies caused by variations in the alignment of the coil. The research studies equivalent maximum power transfer topologies for evaluating voltage gain and coupling link efficiency of TET system. Also, this research adds to previous efforts by generalizing different scenarios of misalignments of different coil size that affects the coupling link. As a whole, this study of geometric coil misalignments reconsiders potential anatomic location for coil placement to optimize TET systems performance in anticipated environment for efficient and safe operation.--Abstract

Enhancing wireless power transfer efficiency for potential use in cardiovascular applications

Left Ventricular Assist Devices (LVAD) are being used to assist blood circulation in heart failure patients. The requirement to have a continuous energy supply is deteriorating the patients’ life quality since they need either to carry along two heavy battery packs or to attach a power cable. For this reason, a wireless power transmission (WPT) system is developed to power the LVAD. Within its effective charging region, the WPT system will offer an autonomous charging process which may lead to a smaller battery pack and cableless experience to the user. Previous WPT systems for cardiovascular applications are either compromised by poor transfer efficiency, short transmission distance or safety issues. To address these problems, an impedance matching WPT system is being designed. For increasing the overall transfer efficiency, both sides impedance matching technique and low loss matching networks are being worked on. In addition, efficiency specific design approach is being developed to reduce design complexity. As a result, the transfer efficiency and transmission distance of the impedance matched WPT have been increased by a factor of 7 and 6 times respectively. The conceptual idea for implementing such a system is also discussed in this thesis. Furthermore, safety measurements have been performed to ensure the system is safe to be used

Mid-range transformer based wireless power transfer system for low power devices

Wireless power transfer technique for biomedical devices has drawn great interest from many researchers in the biomedical domain. Biomedical devices can be powered up either by an external power cord or by batteries. However an external power cord may limit the mobility of a patient and batteries tend to have a very limited power capacity and these methods may pose a high risk of infection towards the patient. Therefore, a wireless power transfer system is proposed to solve the problem. This study attempts to develop a mid-range transformer based wireless power transmission system which is suitable to power biomedical devices. This includes the develop of a transmitter circuit, receiver circuit, a pair of transmitter and receiver coils and transformers. This study demonstrates that magnetic coupling technique is a reliable wireless charging technique biomedical devices due to its mid-range transmission and satisfactory efficiency. In order to reduce power loss, an impedance matching method which incorporates a step-up and step-down transformers in the transmitter and receiver circuit is proposed. This study also develops a wireless power charging system that does not emit harmful radiation towards the human body. The frequency for the system is within the range of 700 kHz to 900 kHz which is in accordance to the ICNIRP regulation. Three pairs of round-shaped transmitter and receiver coils pair have been designed and fabricated with the diameter size of 30cm, 40cm, and 50cm. The power supply and frequency generator are connected to the transmitter circuit and an oscilloscope is connected to the load of the receiver circuit. The performance results are recorded using a range from 4 centimeters to 110 centimeters and based on the tabulated results, the mid-range wireless power transfer system managed to supply a transfer efficiency of 60% at a distance of 35cm for the 30cm diameter coil, 62% at a distance of 43cm for the 40cm diameter coil and 46% at a distance of 50cm for the 50cm diameter coil

Recent progress in mid-range wireless power transfer

This is a review paper describing recent progress of mid-range applications of wireless power transfer. Starting from Tesla's principles of wireless power transfer a century ago, it outlines magneto-inductive research activities in the last decade on wireless power transfer with the transmission distance in the order of or greater than the coil dimension. It covers the basic characteristics of 2-coil systems, 4-coil systems, systems with relay resonators and the wireless domino-resonator systems. © 2012 IEEE.published_or_final_versio

WIRELESS POWER TRANSFER TO BIOMEDICAL IMPLANTS

Ph.DDOCTOR OF PHILOSOPH

A critical review of recent progress in mid-range wireless power transfer

Starting from Tesla’s principles of wireless power transfer a century ago, this critical review outlines recent magneto-inductive research activities on wireless power transfer with the transmission distance greater than the transmitter coil dimension. It summarizes the operating principles of a range of wireless power research into (i) the maximum power transfer and (ii) the maximum energy efficiency principles. The differences and the implications of these two approaches are explained in terms of their energy efficiency and transmission distance capabilities. The differences between the system energy efficiency and the transmission efficiency are also highlighted. The review covers the 2-coil systems, the 4-coil systems, the systems with relay resonators and the wireless domino-resonator systems. Related issues including human exposure issues and reduction of winding resistance are also addressed. The review suggests that the use of the maximum energy efficiency principle in the 2-coil systems is suitable for short-range rather than mid-range applications, the use of the maximum power transfer principle in the 4-coil systems is good for maximizing the transmission distance, but is under a restricted system energy efficiency (< 50%); the use of the maximum energy efficiency principle in relay or domino systems may offer a good compromise for good system energy efficiency and transmission distance on the condition that relay resonators can be placed between the power source and the load.published_or_final_versio

Southwest Research Institute assistance to NASA in biomedical areas of the technology utilization program Final report, 1 Feb. 1969 - 24 Aug. 1970

Research progress in technology transfer by NASA Biomedical Application Tea

Construction of a radiofrequency wireless system for electric energy transmission

ТНE PURPOSE. The objective of this study is to investigate the possibilities of longer distance resonant energy transmission applying Wireless Power Transfer (WPT) in the MHz frequency range. The planned final purpose is the energy to be transferred to all types (aerial and terrestrial) of electric vehicles (EV), mainly for the battery charging at a larger distance, compared to the normal dis-tances of WPT in use at this moment. The key to this type of High Frequency (HF) WPT system is the strong resonant inductive coupling. METHODS. This project is based on the HF power oscillations generating equipment, which original function is to generate several kW of power at MHz frequency for welding of acrylic or other plastic details. RESULTS. As a first step, the equipment was modified to supply HF power for the WPT transmitter coil, instead of supplying power to the soldering plates. The operation frequency is defined by the factory, and it is made now regulable between 8 and 14 MHz by introducing a vacuum variable capacitor. The internal powerful oscillator is based on the electronic vacuum tube ITL 5-1, a military type, capable to deliver up to 3.5 kW active power at the output. The original output had a coaxial form for supplying finally the capacitive load of the dielectric welder. This had to be reworked and a resonant loop, i.e., a capacitively compensated transmitting coil, is now connected. The intended application of this HF system is to charge the batteries of a public transport EV, possibly during its periodic stops, while the passengers will enter and leave. CONCLUSION. The applied frequency is relatively high and the distances are larger, this system still uses the magnetic field as the energy transporter, i.e., it is a near field transmission, a non-radiating system, and is expected not to produce adverse effects on the human being’s health, or to achieve a safe protection from the field