205 research outputs found
Orbit Characterization, Stabilization and Composition on 3D Underactuated Bipedal Walking via Hybrid Passive Linear Inverted Pendulum Model
A Hybrid passive Linear Inverted Pendulum (H-LIP) model is proposed for characterizing, stabilizing and composing periodic orbits for 3D underactuated bipedal walking. Specifically, Period-l (P1) and Period -2 (P2) orbits are geometrically characterized in the state space of the H-LIP. Stepping controllers are designed for global stabilization of the orbits. Valid ranges of the gains and their optimality are derived. The optimal stepping controller is used to create and stabilize the walking of bipedal robots. An actuated Spring-loaded Inverted Pendulum (aSLIP) model and the underactuated robot Cassie are used for illustration. Both the aSLIP walking with PI or P2 orbits and the Cassie walking with all 3D compositions of the PI and P2 orbits can be smoothly generated and stabilized from a stepping-in-place motion. This approach provides a perspective and a methodology towards continuous gait generation and stabilization for 3D underactuated walking robots
Dynamic Walking on Slippery Surfaces: Demonstrating Stable Bipedal Gaits with Planned Ground Slippage
Dynamic bipedal robot locomotion has achieved remarkable success due in part to recent advances in trajectory generation and nonlinear control for stabilization. A key assumption utilized in both theory and experiments is that the robot’s stance foot always makes no-slip contact with the ground, including at impacts. This assumption breaks down on slippery low-friction surfaces, as commonly encountered in outdoor terrains, leading to failure and loss of stability. In this work, we extend the theoretical analysis and trajectory optimization to account for stick-slip transitions at point foot contact using Coulomb’s friction law. Using AMBER-3M planar biped robot as an experimental platform, we demonstrate for the first time a slippery walking gait which can be stabilized successfully both on a lubricated surface and on a rough no-slip surface. We also study the influence of foot slippage on reducing the mechanical cost of transport, and compare energy efficiency in both numerical simulation and experimental measurement
Feedback Control of an Exoskeleton for Paraplegics: Toward Robustly Stable Hands-free Dynamic Walking
This manuscript presents control of a high-DOF fully actuated lower-limb
exoskeleton for paraplegic individuals. The key novelty is the ability for the
user to walk without the use of crutches or other external means of
stabilization. We harness the power of modern optimization techniques and
supervised machine learning to develop a smooth feedback control policy that
provides robust velocity regulation and perturbation rejection. Preliminary
evaluation of the stability and robustness of the proposed approach is
demonstrated through the Gazebo simulation environment. In addition,
preliminary experimental results with (complete) paraplegic individuals are
included for the previous version of the controller.Comment: Submitted to IEEE Control System Magazine. This version addresses
reviewers' concerns about the robustness of the algorithm and the motivation
for using such exoskeleton
In silico case studies of compliant robots: AMARSI deliverable 3.3
In the deliverable 3.2 we presented how the morphological computing ap-
proach can significantly facilitate the control strategy in several scenarios,
e.g. quadruped locomotion, bipedal locomotion and reaching. In particular,
the Kitty experimental platform is an example of the use of morphological
computation to allow quadruped locomotion. In this deliverable we continue
with the simulation studies on the application of the different morphological
computation strategies to control a robotic system
Terrestrial Locomotion of PogoX: From Hardware Design to Energy Shaping and Step-to-step Dynamics Based Control
We present a novel controller design on a robotic locomotor that combines an
aerial vehicle with a spring-loaded leg. The main motivation is to enable the
terrestrial locomotion capability on aerial vehicles so that they can carry
heavy loads: heavy enough that flying is no longer possible, e.g., when the
thrust-to-weight ratio (TWR) is small. The robot is designed with a pogo-stick
leg and a quadrotor, and thus it is named as PogoX. We show that with a simple
and lightweight spring-loaded leg, the robot is capable of hopping with TWR
. The control of hopping is realized via two components: a vertical height
control via control Lyapunov function-based energy shaping, and a step-to-step
(S2S) dynamics based horizontal velocity control that is inspired by the
hopping of the Spring-Loaded Inverted Pendulum (SLIP). The controller is
successfully realized on the physical robot, showing dynamic terrestrial
locomotion of PogoX which can hop at variable heights and different horizontal
velocities with robustness to ground height variations and external pushes.Comment: 7 pages, 7 figure
- …