Reliable Cognitive Ultra Wideband Communication Systems Under Coexistence Constraints

RÉSUMÉ La croissance rapide des systèmes de communication sans fil et la rareté du spectre ont motivé les industries et les fournisseurs ouvrant dans le domaine de communication sans fil de développer des stratégies et des technologies de communication qui peuvent utiliser efficacement les ressources spectrales. La réutilisation pacifique du spectre sous-licence et sous-utilisé peut être une solution prometteuse pour certaines initiatives en cours telles que la communication mobile à haut débit, la communication machine-à-machine, et la connectivité WiFi. Un des plus gros facteurs qui empêche l'approche de cette réutilisation de fréquences est l'effet d'environnements bruyants sur les dispositifs coexistent dans la même bande de fréquence. Par conséquent, la demande pour une stratégie de coexistence pacifique entre les utilisateurs du spectre, des défis et des questions techniques qu'elle engêndre, motive notre recherche. Il est à noter que dans cette thèse, nous considérons un système pratique appelé MB-OFDM UWB (en anglais multiband orthogonal frequency division multiplexing ultra wideband) pour donner un aperçu pratique de ce concept. Pour atteindre cet objectif, d'abord nous examinons le problème d'interférence des utilisateurs secondaires sur les utilisateurs principaux. A cet effet, tenant compte d'un système secondaire OFDM, nous proposons des méthodes de mise en forme du spectre pour les applications de transmission à antennes simples et multiples. Nous présentons une technique débit-efficace nommée “Enhanced active interference cancellation (E - AIC)qui est en effet capable de créer des encoches ayant des caractéristiques flexibles. Afin de résoudre le problème de dépassement du spectre causé pas la technique classique-AIC, nous utilisons une approche multi-contraintes qui à son tour cause un problème multi-contrainte de minimisation (en anglais multi-constraint minimization problem, MCMP). Cependant, un nouvel algorithme itératif basé sur la technique SVD (en anglais singular value decomposition) est proposé, permettant ainsi de réduire la complexité de la solution de MCMP. Les résultats de simulation obtenus montrent que la technique E-AIC proposée fournit de meilleures performances en termes de suppression des lobes latéraux avec 0 dB de dépassement, moins de complexité de calcul et moins de perte de débit par rapport aux méthodes AIC précédentes. Quant aux antennes multiples, nous proposons deux nouvelles techniques AIC, qui utilisent l'idée principale des approches de sélection d'antennes d'émission (en anglais transmit antenna selection, TAS). Bien que les résultats montrent que les deux techniques permettent la création d'encoche identique, la technique per-tone TAS-AIC a la plus grande efficacité spectrale. Après avoir obtenu une emission sans interférence pour le système MB-OFDM UWB, nous analysons, modélisons et atténuons le bruit impulsif au récepteur MB-OFDM UWB. Pour ce faire, d'abord, nous proposons un cadre analytique qui décrit les principales caractéristiques d'interférence d'un système à ultra large bande et saut temporel (en anglais time-hopping UWB, TH-UWB) niveau de ces paramètres de signalisation. Les résultats montrent que la distribution d'interférence dépend fortement aux paramètres de saut temporel du système TH-UWB.----------ABSTRACT The rapid growth of wireless communication systems along with the radio spectrum's scarcity and regulatory considerations have put the onus on the wireless industries and service providers to develop wireless communication strategies and technologies that can efficiently utilize the spectral resources. Hence, peaceful reuse of underutilized licensed radio frequencies (by secondary users) can be a promising solution for some ongoing initiatives such as mobile broadband, machine-to-machine applications and WiFi connectivity. One of the biggest factors that prevents the spectrum reusing approach to effectively address the spectrum scarcity, is noisy environments result from coexistence of different devices in the same frequency band. Therefore, the request for a peaceful coexistence strategy between spectrum users, which leads to various challenges, and technical issues, motivates our research. It is worth noting that, in this thesis, we consider a practical system called multiband orthogonal frequency division multiplexing ultra wideband (MB-OFDM UWB) as an underlay system to provide a practical insight into this concept. However, all the obtained results and contributions are applicable to other OFDM-based communication systems. Towards this goal, we first investigate the problem of the interference from secondary users to the primary users. For this purpose, considering an OFDM-based secondary communication system, we propose spectrum-shaping methods for single and multiple transmit antennas applications. For single antenna scenario, we present a throughput-efficient enhanced active interference cancellation (E-AIC) technique, which is indeed capable of creating notches with flexible characteristics. In order to address the spectrum overshoot problem of conventional-AIC techniques, we employed a multi-constraint approach, which leads to a multi-constraint minimization problem (MCMP). Hence, a novel iterative singular value decomposition (SVD) based algorithm is proposed to reduce the complexity of the MCMP's solution. The obtained simulation results show that the proposed enhanced-AIC technique provides higher performance in terms of sidelobes suppression with 0 dB overshoot, less computational complexity and less throughput-loss compared to previous constrained-AIC methods. For multiple transmit antennas, we propose two novel AIC techniques employing main ideas behind bulk and per-tone transmit antenna selection (TAS) approaches. Simulation results show that although both techniques provide identical notch creation, the per-tone TAS-AIC technique has higher spectral efficiency

Indoor Radio Measurement and Planning for UMTS/HSPDA with Antennas

Over the last decade, mobile communication networks have evolved tremendously with a key focus on providing high speed data services in addition to voice. The third generation of mobile networks in the form of Universal Mobile Telecommunications System (UMTS) is already offering revolutionary mobile broadband experience to its users by deploying High Speed Downlink Packet Access (HSDPA) as its packet-data technology. With data speeds up to 14.4 Mbps and ubiquitous mobility, HSDPA is anticipated to become a preferred broadband access medium for end-users via mobile phones, laptops etc. While majority of these end-users are located indoors most of the time, approximately 70-80% of the HSDPA traffic is estimated to originate from inside buildings. Thus for network operators, indoor coverage has become a necessity for technical and business reasons. Macro-cellular (outdoor) to indoor coverage is a natural inexpensive way of providing network coverage inside the buildings. However, it does not guarantee sufficient link quality required for optimal HSDPA operation. On the contrary, deploying a dedicated indoor system may be far too expensive from an operator\u27s point of view. In this thesis, the concept is laid for the understanding of indoor radio wave propagation in a campus building environment which could be used to plan and improve outdoor-to-indoor UMTS/HSDPA radio propagation performance. It will be shown that indoor range performance depends not only on the transmit power of an indoor antenna, but also on the product\u27s response to multipath and obstructions in the environment along the radio propagation path. An extensive measurement campaign will be executed in different indoor environments analogous to easy, medium and hard radio conditions. The effects of walls, ceilings, doors and other obstacles on measurement results would be observed. Chapter one gives a brief introduction to the evolution of UMTS and HSDPA. It goes on to talk about radio wave propagation and some important properties of antennas which must be considered when choosing an antenna for indoor radio propagation. The challenges of in-building network coverage and also the objectives of this thesis are also mentioned in this chapter. The evolution and standardization, network architecture, radio features and most importantly, the radio resource management features of UMTS/HSDPA are given in chapter two. In this chapter, the reason why Wideband Code Division Multiple Access (WCDMA) was specified and selected for 3G (UMTS) systems would be seen. The architecture of the radio access network, interfaces with the radio access network between base stations and radio network controllers (RNC), and the interface between the radio access network and the core network are also described in this chapter. The main features of HSDPA are mentioned at the end of the chapter. In chapter three the principles of the WCDMA air interface, including spreading, Rake reception, signal fading, power control and handovers are introduced. The different types and characteristics of the propagation environments and how they influence radio wave propagation are mentioned. UMTS transport, logical and physical channels are also mentioned, highlighting their significance and relationship in and with the network. Radio network planning for UMTS is discussed in chapter four. The outdoor planning process which includes dimensioning, detailed planning, optimization and monitoring is outlined. Indoor radio planning with distributed antenna systems (DAS), which is the idea and motivation behind this thesis work, is also discussed. The various antennas considered and the antenna that was selected for this thesis experiment was discussed in chapter five. The antenna radiation pattern, directivity, gain and input impedance were the properties of the antenna that were taken into consideration. The importance of the choice of the antenna for any particular type of indoor environment is also mentioned. In chapter six, the design and fabrication of the monopole antennas used for the experimental measurement is mentioned. The procedure for measurement and the equipment used are also discussed. The results gotten from the experiment are finally analyzed and discussed. In this chapter the effect of walls, floors, doors, ceilings and other obstacles on radio wave propagation will be seen. Finally, chapter seven concludes this thesis work and gives some directions for future work

Engineering evaluations and studies. Volume 3: Exhibit C

High rate multiplexes asymmetry and jitter, data-dependent amplitude variations, and transition density are discussed

Delay-line stabilized microwave oscillator with frequency control

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The technique whereby the frequency of an oscillator is stabilized using an external feedback network incorporating a delay-line is extended in this thesis to provide digital control of the frequency of the oscillator. Novel circuit techniques have been developed and analysed to permit the implementation of the proposed frequency control technique in a compact format, suitable for implementation in either hybrid or monolithic microwave integrated circuits. Two new microstrip circuits have been introduced, namely the three-port ring discriminator and the single PIN diode phase shifter. Frequency control of an oscillator is achieved by digitally controlling the time delay through phase shifters in the feedback path of the oscillator's stabilization circuit. A new microstrip phase shifting circuit has been developed which has the advantage of requiring only one active switching element to achieve each digital bit of phase change. The circuit has been analysed in detail and results obtained at X-band to support the theoretical predictions. As part of the analysis of this new component, and in order to permit a greater degree of precision in the design of the phase changes, some new microstrip design techniques have been introduced. These have led to a more exact design for coupled line phase shifters and to an equivalent circuit to represent the excess phase in microstrip DC breaks. Delay-line stabilization of an oscillator requires the use of a phase sensitive network, or frequency discriminator. Whilst this could be realised on microstrip using conventional circuitry, by interconnecting two hybrid rings, a new circuit component, namely the three-port ring discriminator, was developed to provide a simpler, more compact solution. A rigorous analysis of the new circuit is presented, and the behaviour verified through measurements over the frequency range 8-12GHz. The new single PIN diode phase shifter has been incorporated in the delay path of a three-port ring discriminator, and used to control the frequency of an oscillator. Results are presented for circuits at X-band which show the degree of frequency stabilization that has been obtained, together with the reduction in oscillator phase noise. In addition, the original concept of delayline switching to control the frequency of an oscillator has been extended to yield a further new circuit, based on a three-port ring with a switchedfeed mechanism; results are presented which verify the operation of this new circuit both theoretically and through practical measurement. New techniques for controlling the frequency of microstrip oscillators have thus been established, both theoretically and through practical measurement, which combine simple methods of frequency selection with inherent low-noise performance

Wireless Sensors and Actuators for Structural Health Monitoring of Fiber Composite Materials

This work evaluates and investigates the wireless generation and detection of Lamb-waves on fiber-reinforced materials using surface applied or embedded piezo elements. The general target is to achieve wireless systems or sensor networks for Structural Health Monitoring (SHM), a type of Non-Destructive-Evaluation (NDE). In this sense, a fully wireless measurement system that achieves power transmission implementing inductive coils is reported. This system allows a reduction of total system weight as well as better integration in the structure. A great concern is the characteristics of the material, in which the system is integrated, because the properties can have a direct impact on the strength of the magnetic field. Carbon-Fiber-Reinforced-Polymer (CFRP) is known to behave as an electrical conductor, shielding radio waves with increasing worse effects at higher frequencies. Due to the need of high power and voltage, interest is raised to evaluate the operation of piezo as actuators at the lower frequency ranges. To this end, actuating occurs at the International Scientific and Medical (ISM) band of 125 kHz or low-frequency (LF) range. The feasibility of such system is evaluated extensively in this work. Direct excitation, is done by combining the actuator bonded to the surface or embedded in the material with an inductive LF coil and setting the circuit in resonance. A more controlled possibility, also explored, is the use of electronics to generate a Hanning-windowed-sine to excite the PWAS in a narrow spectrum. In this case, only wireless power is transmitted to the actuator node, and this lastly implements a Piezo-driver to independently excite Lamb-waves. Sensing and data transfer, on the other hand, is done using the high-frequency (HF) 13.56 MHz. The HF range covers the requirements of faster sampling rate and lower energy content. A re-tuning of the antenna coils is performed to obtain better transmission qualities when the system is implemented in CFRP. Several quasi-isotropic (QI) CFRP plates with sensor and actuator nodes were made to measure the quality of transmission and the necessary energy to stimulate the actuator-sensor system. In order to produce baselines, measurements are prepared from a healthy plate under specific temperature and humidity conditions. The signals are evaluated to verify the functionality in the presence of defects. The measurements demonstrate that it is possible to wirelessly generate Lamb-waves while early results show the feasibility to determine the presence of structural failure. For instance, progress has been achieved detecting the presence of a failure in the form of drilled holes introduced to the structure. This work shows a complete set of experimental results of different sensor/-actuator nodes

Vacuum Ultraviolet Absorption Measurements of Atomic Oxygen in a Shock Tube

The absorption of vacuum ultraviolet light by atomic oxygen has been measured in the Electric Arc-driven Shock Tube (EAST) Facility at NASA-Ames Research Center. This investigation demonstrates the instrumentation required to determine atomic oxygen concentrations from absorption measurements in impulse facilities. A shock wave dissociates molecular oxygen, producing a high temperature sample of atomic oxygen in the shock tube. A probe beam is generated with a Raman-shifted ArF excimer laser. By suitable tuning of the laser, absorption is measured over a range of wavelengths in the region of the atomic line at 130.49 nm. The line shape function is determined from measurements at atomic oxygen densities of 3 x 10(exp 17) and 9 x 10(exp 17) cm(exp -3). The broadening coefficient for resonance interactions is deduced from this data, and this value is in accord with available theoretical models