Power system security assessment through analog computation

This dissertation proposes a methodology for power system security assessment through analog computation. By exploiting the strengths of analog computation a more robust security assessment can be performed as compared to traditional methods. Security assessment is currently performed by power system operators utilizing digital computers and determines the power system structure, states and level of security based on telemetered data and knowledge of the system. Ideally this process would occur in real time but due to the limitations of digital computers and telemetry systems the security assessment is currently conducted at periodic intervals of ten to fifteen minutes. This process requires a tremendous amount of computation for large systems. In order to provide updated assessment at such time intervals, not even in real time, numerous assumptions and simplifications of the power system models and analyses are required to simplify and speed up the digital computations. Due to its inherent speed and computational efficiency analog computation is proving to be a viable alternative.Analog computation by definition is continuous in time and embodies an entirely different paradigm to computing as compared to discrete time methods. Security assessment for digital computers consists of topology estimations, state estimation and contingency analysis. The theory and practical approaches to these tasks through digital, discrete time, computational methods are fairly mature at this point in time but do not translate directly to analog computation. A robust analog computation engine along with corresponding computational theory is required in order to make use of analog methods for power system security assessment. This dissertation provides the relevant theory, hardware realization and application of an analog computer for power system security assessment.Ph.D., Electrical Engineering -- Drexel University, 200

A mixed-signal computer architecture and its application to power system problems

Radical changes are taking place in the landscape of modern power systems. This massive shift in the way the system is designed and operated has been termed the advent of the ``smart grid''. One of its implications is a strong market pull for faster power system analysis computing. This work is concerned in particular with transient simulation, which is one of the most demanding power system analyses. This refers to the imitation of the operation of the real-world system over time, for time scales that cover the majority of slow electromechanical transient phenomena. The general mathematical formulation of the simulation problem includes a set of non-linear differential algebraic equations (DAEs). In the algebraic part of this set, heavy linear algebra computations are included, which are related to the admittance matrix of the topology. These computations are a critical factor to the overall performance of a transient simulator. This work proposes the use of analog electronic computing as a means of exceeding the performance barriers of conventional digital computers for the linear algebra operations. Analog computing is integrated in the frame of a power system transient simulator yielding significant computational performance benefits to the latter. Two hybrid, analog and digital computers are presented. The first prototype has been implemented using reconfigurable hardware. In its core, analog computing is used for linear algebra operations, while pipelined digital resources on a field programmable gate array (FPGA) handle all remaining computations. The properties of the analog hardware are thoroughly examined, with special attention to accuracy and timing. The application of the platform to the transient analysis of power system dynamics showed a speedup of two orders of magnitude against conventional software solutions. The second prototype is proposed as a future conceptual architecture that would overcome the limitations of the already implemented hardware, while retaining its virtues. The design space of this future architecture has been thoroughly explored, with the help of a software emulator. For one possible suggested implementation, speedups of four orders of magnitude against software solvers have been observed for the linear algebra operations

Design and Control of Power Converters for High Power-Quality Interface with Utility and Aviation Grids

Power electronics as a subject integrating power devices, electric and electronic circuits, control, and thermal and mechanic design, requires not only knowledge and engineering insight for each subarea, but also understanding of interface issues when incorporating these different areas into high performance converter design.Addressing these fundamental questions, the dissertation studies design and control issues in three types of power converters applied in low-frequency high-power transmission, medium-frequency converter emulated grid, and high-frequency high-density aviation grid, respectively, with the focus on discovering, understanding, and mitigating interface issues to improve power quality and converter performance, and to reduce the noise emission.For hybrid ac/dc power transmission,• Analyze the interface transformer saturation issue between ac and dc power flow under line unbalances.• Proposed both passive transformer design and active hybrid-line-impedance-conditioner to suppress this issue.For transmission line emulator,• Propose general transmission line emulation schemes with extension capability.• Analyze and actively suppress the effects of sensing/sampling bias and PWM ripple on emulation considering interfaced grid impedance.• Analyze the stability issue caused by interaction of the emulator and its interfaced impedance. A criterion that determines the stability and impedance boundary of the emulator is proposed.For aircraft battery charger,• Investigate architectures for dual-input and dual-output battery charger, and a three-level integrated topology using GaN devices is proposed to achieve high density.• Identify and analyze the mechanisms and impacts of high switching frequency, di/dt, dv/dt on sensing and power quality control; mitigate solutions are proposed.• Model and compensate the distortion due to charging transition of device junction capacitances in three-level converters.• Find the previously overlooked device junction capacitance of the nonactive devices in three-level converters, and analyze the impacts on switching loss, device stress, and current distortion. A loss calculation method is proposed using the data from the conventional double pulse tester.• Establish fundamental knowledge on performance degradation of EMI filters. The impacts and mechanisms of both inductive and capacitive coupling on different filter structures are understood. Characterization methodology including measuring, modeling, and prediction of filter insertion loss is proposed. Mitigation solutions are proposed to reduce inter-component coupling and self-parasitics

Analog methods for power system analysis and load modeling

This dissertation explores how and why analog computation may be utilized to study several aspects of power system load behavior. An analog computer is one which utilizes continuous electrical signals instead of discrete bits, 0’s and 1’s, to represent numerical values. Generally, it is utilized to solve a set of complex nonlinear differential equations: a process referred to as analog emulation. In the first chapters, this work examines how load may be represented in a modern analog computer designed to emulate the behavior of a multi-bus power system and perform fast power-flow analysis. Focus is placed on the design, testing, and fabrication of a printer circuit (PC) board for this purpose. In later chapters, it examines the effect of system size and model complexity on analog and hybrid (combination of analog and digital hardware) computation times. Focus is placed on static security analysis (SSA) as well as a method to minimize these computation times through reduced actuation and data acquisition. In the final chapters, this work examines how analog hardware may be utilized to perform measurement-based composite load modeling. Focus is placed on the theory, design, and testing of an analog circuit to estimate the parameters of an assumed load model from network observation. The accuracy of a power-flow analysis is only as accurate as the models and parameters that it utilizes. For this reason, the utilization of analog hardware to both represent load in power-flow analysis (state determination) and model load behavior (parameter estimation) are addressed in this dissertation.Ph.D., Electrical Engineering -- Drexel University, 200

Efficient, High power Precision RF and mmWave Digital Transmitter Architectures

Digital transmitters offer several advantages over conventional analog transmitters such as reconfigurability, elimination of scaling-unfriendly, power hungry and bulky analog blocks and portability across technology. The rapid advancement of technology in CMOS processes also enables integration of complex digital signal processing circuitry on the same die as the digital transmitter to compensate for their non-idealities. The use of this digital assistance can, for instance, enable the use of highly efficient but nonlinear switching-class power amplifiers by compensating for their severe nonlinearity through digital predistortion. While this shift to digitally intensive transmitter architectures is propelled by the benefits stated above, several pressing challenges arise that vary in their nature depending on the frequency of operation - from RF to mmWave. Millimeter wave CMOS power amplifiers have traditionally been limited in output power due to the low breakdown voltage of scaled CMOS technologies and poor quality of on-chip passives. Moreover, high data-rates and efficient spectrum utilization demand highly linear power amplifiers with high efficiency under back-off. However, linearity and high efficiency are traditionally at odds with each other in conventional power amplifier design. In this dissertation, digital assistance is used to relax this trade-off and enable the use of state-of-the-art switching class power amplifiers. A novel digital transmitter architecture which simultaneously employs aggressive device-stacking and large-scale power combining for watt-class output power, dynamic load modulation for linearization, and improved efficiency under back-off by supply-switching and load modulation is presented. At RF frequencies, while the problem of watt-class power amplification has been long solved, more pressing challenges arise from the crowded spectrum in this regime. A major drawback of digital transmitters is the absence of a reconstruction filter after digital-to-analog conversion which causes the baseband quantization noise to get upconverted to RF and amplified at the output of the transmitter. In high power transmitters, this upconverted noise can be so strong as to prevent their use in FDD systems due to receiver desensitization or impose stringent coexistence challenges. In this dissertation, new quantization noise suppression techniques are presented which, for the first time, contribute toward making watt-class fully-integrated digital RF transmitters a viable alternative for FDD and coexistence scenarios. Specifically, the techniques involve embedding a mixed-domain multi-tap FIR filter within highly-efficient watt-class switching power amplifiers to suppress quantization noise, enhancing the bandwidth of noise suppression, enabling tunable location of suppression and overcoming the limitations of purely digital-domain filtering techniques for quantization noise

Reconfigurable Computing Based on Commercial FPGAs. Solutions for the Design and Implementation of Partially Reconfigurable Systems = Computación reconfigurable basada en FPGAs comerciales. Soluciones para el diseño e implementación de sistemas parcialmente reconfigurables.

Esta tesis doctoral está enmarcada en el campo de investigación de la computación reconfigurable. Este campo ha experimentado un crecimiento abrumador en los últimos años como resultado de la evolución de los dispositivos reconfigurables, donde las Field Programmable Gate Arrays (FPGAs) son el máximo exponente desde el punto de vista comercial. De forma tradicional las empresas de electrónica han seleccionado las FPGAs como prototipos iníciales de productos de altas prestaciones. Luego el sistema final es integrado en Application Specific Integrated Circuits (ASICs) que se producen en grandes volúmenes perimiendo amortiza su alto coste de diseño y producción y aprovechando la ventaja del bajo coste por unidad. Por otro lado, los DSPs (Digital Signal Processing) y los microprocesadores han sido preferidos por su bajo coste ante las FPGAs el campo de los dispositivos con menores requisitos de cómputo. En los últimos años, este panorama está sufriendo una serie de cambios. Ahora el mercado busca mas soluciones “reconfigurables” ya que permiten reducir el tiempo de salida del producto al mercado (time-to-market), aumentar el tiempo del producto en el mercado (time-in-market) y además cubren los amplios requisitos de cómputo. El cambio que se observa, se debe a que los dispositivos programables han evolucionado de simples estructuras programables a complejas plataformas reconfigurables. Las FPGAs del estado de la técnica han alcanzado un grado de integración muy alto y además ahora contienen, dentro de su arquitectura programable, microprocesadores y lógica específica de procesamiento digital de señal. Otro factor sumamente importante para el cambio es que las FPGAs permiten el diseño de dispositivos cuyo hardware pueden ser adaptado, o actualizado, una vez que el producto ya esta entregado e instalado, obteniendo así una flexibilidad en el hardware comparable con la del software, donde la actualización postventa de los sistemas es una práctica muy explotada de cara a la reducción de costes y la salida rápida al mercado. Por otro lado, y sobre todo en el ámbito académico, existen dispositivos reconfigurables con distinta granularidad que permites alcanzar altas prestaciones en comparación con las FPGAs comerciales de grano fino (comparable con la de los ASICs), pero están restringidas a una aplicación o grupo de aplicaciones. A pesar de que los dispositivos reconfigurables propietarios ofrecen muchas ventajas, esta opción ha sido descartada en la presente tesis debido a que, desde el punto de vista industrial requieren, aparte del diseño del ASIC reconfigurable, el desarrollo de un entorno de diseño completo. Todo esto conlleva a un elevado coste de recursos, además del alejamiento de las propuestas de la industria. La presente tesis se ha centrado en proporcionar soluciones para dispositivos comerciales, FPGAs de grano fino, con la finalidad de aprovechar las herramientas existentes y mantener las soluciones propuestas lo más cerca posible de la industria. Los dispositivos reconfigurables proporcionan diversos métodos de reconfiguración, siendo el más atractivo la reconfiguración parcial y dinámica, ya que permite adaptar el dispositivo sin interrumpir su funcionamiento y crear dispositivos auto-adaptables. Este tipo de reconfiguración será el objeto de estudio de la tesis doctoral. La reconfiguración parcial permite tener una serie de tareas hardware (módulos que se ubican en la estructura reconfigurable) ejecutándose paralelamente en la FPGA y sustituir un bloque por otro, dependiendo de las necesidades del sistema, sin alterar el funcionamiento del resto de bloques. Esta idea básica en teoría brinda la flexibilidad del software al hardware, que combinado con su paralelismo implícito hace del sistema reconfigurable una potente herramienta que puede dar pie a la creación de sistemas adaptables o incluso autoadaptativos, supercomputadores reconfigurables y hardware bio-inspirado entre otros. Por otro lado, a pesar que algunos proveedores de FPGAs permiten la reconfiguración parcial, el uso de esta técnica aún está restringido al ámbito académico y a sistemas muy básicos. El trabajo de investigación descrito dentro de la presente tesis doctoral ha tenido por objeto el estudio de diversos aspectos de los sistemas parcialmente reconfigurables, la identificación de las principales deficiencias de las soluciones existentes y la propuesta de nuevas soluciones originales. Como resultado del estudio del estado del arte se ha visto que las soluciones existentes son poco flexibles y la escalabilidad de los sistemas que se pueden diseñar es reducida. Por ello las propuestas originales de esta tesis tienen como objetivo permitir el diseño e implementación de sistemas parcialmente reconfigurables con alta escalabilidad y flexibilidad. La tesis principal del trabajo de investigación ha sido basada en la idea que para obtener una mayor flexibilidad de los sistemas se debe desligar el diseño del sistema reconfigurable del diseño de los cores que serán consumidos por dicho sistema. La tesis doctoral ha contribuido proponiendo mejores soluciones a nivel de arquitectura, flujos de diseño y herramientas que han permitido el diseño e implementación de diversos sistemas parcialmente reconfigurables con distinto grado de flexibilidad y escalabilidad. La flexibilidad y la escalabilidad son términos que en los sistemas reconfigurables se pueden asociar a diversos aspectos. Dentro de esta tesis la flexibilidad está asociada principalmente a la diversidad de cores o tareas hardware que pueden ser consumidos o integrados en un sistema ya definido, mientras que la escalabilidad está referida al número de cores que pueden coexistir en el sistema y ser reconfigurados independientemente. Para poder diseñar sistemas flexibles y escalables, estas características deben estar cubiertas en distintos niveles. Más en detalle dentro de la presente tesis, desde el punto de vista de la arquitectura, la flexibilidad está cubierta por la posibilidad de posicionar libremente cores en una arquitectura escalable predefinida. Desde el punto de vista del sistema, la flexibilidad está reflejada por la posibilidad de no sólo de modificar o reconfigurar un core del sistema hardware, sino también de modificar las comunicaciones internas del mismo. Desde el punto de vista del dispositivo, la flexibilidad está garantizada por la transparencia en el proceso de reconfiguración. Por último, la flexibilidad en el proceso de diseño está cubierta por la definición de herramientas y flujos de diseño que permiten por un lado desligar el diseño del sistema reconfigurable del diseño de los cores para el sistema, y por otro lado que diseñadores sin conocimientos detallados de reconfiguración parcial puedan diseñar cores. Dentro de la tesis doctoral se presentan cuatro dispositivos reconfigurable integrados en distintos entornos y con distinto grado de flexibilidad que corresponde al grado de aprovechamiento de las aportaciones originales de la tesis. Las principales aportaciones de la tesis doctoral, relacionadas a cada uno de los aspectos mencionados en el párrafo anterior, y tratados en distintas partes de la tesis se resumen a continuación destacando en la medida de lo posible las diferencias con respecto al estado del arte: Se ha definido una metodología de diseño de Arquitecturas Virtuales (abstracción de la arquitectura física de la FPGA que incluye la distribución de los recursos programables en slots y la forma de interconexión de los slots). La metodología, propuesta originalmente en esta tesis, permite el diseño de sistemas reconfigurables con alta flexibilidad y escalabilidad comparadas con el estado del arte. Una solución a la adaptación de las comunicaciones internas en los sistemas reconfigurables llamada DRNoC (Dynamic Reconfigurable NoC). La solución original abarca diversos aspectos e incluye la definición de una arquitectura de interconexión para los sistemas reconfigurables basada en redes en chip (Network on Chip - NoC), la definición de métodos de reconfiguración y el direccionamiento interno del sistema, y de forma más específica para las comunicaciones basadas en redes, la definición de un formato de tramas y la arquitectura de los enrutadores. La principal diferencia de la solución propuesta con el estado del arte es que DRNoC no restringe la comunicación únicamente a NoCs y permite la definición de cualquier tipo de esquema de comunicación (NoC, punto a punto, punto a multipunto, bus, o una combinación de las anteriores) y además, permite que varios esquemas de comunicación coexistan en el mismo sistema y que funcionen de forma independiente. De esta forma la solución propuesta brinda una mayor flexibilidad que las ya existentes. Se ha propuesto una solución para la manipulación de los ficheros de configuración para las FPGA del tipo Virtex II/Pro que es la más completa comparada con el estado del arte. Asimismo, una serie de herramientas que permiten la generación y extracción de cores para sistemas reconfigurables basados en FPGA Virtex II que ha sido la primera solución existente para estas FPGA. Un flujo de diseño para cores basado en plantillas que permite el diseño de cores hardware sin ser un experto en reconfiguración parcial y sin conocer los detalles del sistema final en el que se implementará el core. El diseño, implementación y prueba de un sistema parcialmente reconfigurable basado en FPGAs comerciales de grano fino para redes de sensores. La primera aproximación existente en el estado del arte al uso de los sistemas parcialmente reconfigurables en las redes de sensores. La integración de un sistema reconfigurable en un entorno cliente-servidor que incluye un original sistema de control de la reconfiguración. Una solución para la depuración de los sistemas reconfigurables. Un sistema de emulación y prototipado rápido de las comunicaciones dentro de un chip basado originalmente en la idea de la reutilización de cores hardware por medio de la técnica de reconfiguración parcial. Como conclusión global del trabajo de investigación realizado cabe destacar que la presente tesis ha dado lugar a la creación y consolidación de una línea de investigación en el grupo de electrónica digital del Centro de Electrónica Industrial que actualmente se encuentra entre las más activas y de mayor importancia. Además, el trabajo de investigación y la divulgación de las aportaciones originales han permitido que el centro de investigación pase a formar parte del estado del arte de los sistemas parcialmente reconfigurables. The thesis is enclosed in the research area of reconfigurable computing which, in the last years, has experienced a remarkable growth as a result of the impressive evolution of reconfigurable devices. In this area, Field Programmable Gate Arrays (FPGAs) are the most outstanding representative from the commercial point of view. Traditionally FPGAs have been used for prototyping, in previous to the final Application Specific Integrated Circuit (ASIC) design stages. However, the interest in the integration of FPGAs in final products has been growing in the last years. FPGAs are preferred for small production volumes, where the ASIC masks high cost is unaffordable and also in products where time-to-market is a priority, and waiting for a complete ASIC design cycle is not desirable. State of the art FPGAs are highly integrated electronic circuits, composed of tens of millions of system gates, with competitive speed, performance and configurability. These devices have evolved from simple gate arrays to complex platforms that include embedded memory, multipliers and even microprocessors and digital signal processing elements. Additionally, the fine grain nature of the reconfigurable arrays, make FPGAs suitable for a broad set of application domains. On the other side, and mostly in the academic community, there are custom reconfigurable devices with different granularity levels that permit to achieve higher performance, compared to commercial FPGAs, but for a certain application domain. Although there are very good solutions in the academic state of the art, their main drawback from the industry point of view is that they require specific design environments and also, that the efforts and resources needed for designing such solutions are very high. This thesis work is focused on providing solutions that target commercial fine grain reconfigurable devices, FPGAs, in order to take advantage of existing tools and to keep the proposed solutions closer to the industry. Today FPGAs provide different reconfiguration options. Among them, the most challenging one is partial reconfiguration. This feature has special interest, as it permits system updates on the fly once the device is deployed, without the need of stopping it and without theoretical loss of performance. Partial reconfiguration is also an attractive feature because it permits to allocate different tasks/cores running in parallel in the device and change them on the fly as needed without disturbing other tasks/cores. This basic idea, brings software-like flexibility to hardware which, in combination with its inherited parallelism, opens the door for a broad amount of possibilities and applications, like runtime adaptive super-computing, adaptive embedded software ii accelerators, bio-inspired, self-reconfigurable and self-arrangeable systems. However, even though some commercial FPGAs provide partial reconfiguration features, its utilization is still in its early stages and it is not well supported by FPGA vendors, making its exploitation in real electronic systems very difficult. Therefore, there are several academic groups working to provide alternative solutions for the design and implementation of partially reconfigurable systems based on commercial FPGAs that intend to stimulate their integration and use in the industry. This research work intents to study different aspects of partially reconfigurable system on-chip and contribute with flexibility improvements. The main idea that will be followed along the thesis is that the design of reconfigurable systems will be considered an independent process from the design of cores that will be consumed by the system. This approach involves the design of flexible and scalable partial runtime reconfigurable systems, where most of the thesis contribution will be focused. More in detail, this thesis will contribute to improve architecture solutions, design tools and design flows of partially reconfigurable systems for commercial FPGAs and provide systems with higher flexibility and scalability. Flexibility and scalability in a reconfigurable system are terms that can be related to several aspects. In this thesis flexibility is mainly related to the diversity of tasks or cores a system can consume, while scalability is connected to the number of cores that can run in parallel and be independently reconfigured. Flexibility and scalability have to be covered by the system at different levels and the work presented in this thesis will contribute in all the specific levels. More in detail, from an architectural point of view, flexibility is reflected by the possibility of freely loading tasks or cores in a defined, scalable architecture. From the system point of view, flexibility is related to the possibility of modifying not only the system functionality by loading different tasks, but also to adapt the on-chip communications. From the device point of view, flexibility is reflected by the reconfiguration process transparency and, from the design point of view, it is oriented to the definition of design tools and flows that will permit, as far as possible, non specialized designers to design cores for a partially reconfigurable system and without knowing the system details. All the original proposed solutions, in each individual aspect, will be compared with the state of the art and complete systems solutions will be designed and will be integrated in different application domains in order to validate the thesis proposals. In order to achieve better understanding of the thesis and to facilitate the comparison with some, selected, related work, the thesis structure is not traditional. Instead of including a state of the art and a result Chapter, each Chapter is focused on a specific aspect of partially reconfigurable system design and includes state of the art and result sections. The first chapter, Chapter 1, introduces the main concepts to be used in the thesis. Chapter 2 is focused on reconfigurable systems architectures, contributing with architecture solutions and a design method. Chapter 3 proposes a solution that enhances the features of the architectures defined in Chapter 2, and provides more flexibility to the entire system by extending reconfiguration to the on-chip communication. Chapter 4 is related to the design flows and tools, where contributions are made in both aspects and the proposed solutions are compared with the state of the Abstract and Thesis Organization iii art. Complete systems, with different independency levels, are presented in Chapter 5 in order to validate the thesis contributions. Conclusions, a summary of contributions and the future work are included in Chapter 6. A more detailed description of each Chapter content is presented below: Chapter 1 provides an introduction to the reconfigurable systems based on FPGAs topic, by first defining the place of FPGAs in the electronic industry and afterwards, introducing the main concepts to be used along the thesis. Although the focus is put on commercial reconfigurable devices, some custom reconfigurable systems are also described in order to have a complete view of the options in reconfigurable devices. The Chapter discuses the thesis main topic, related to partial runtime reconfigurable systems, highlighting its main advantages and disadvantages and, introducing some of the approaches to be followed in this thesis. The main term introduced in this Chapter, associated to reconfigurable systems architectures, is ”Virtual Architecture”. The term defines the architecture of the partially reconfigurable system and how the different regions it is composed of are interconnected. A brief summary of the thesis main goals is included at the end of the Chapter. The main topic of Chapter 2 is related to reconfigurable systems architectures design. The Chapter includes a specific state of the art section that reviews some existing architecture solutions. After that, a general method for virtual architectures design, an original thesis contribution, is presented in detail. Afterwards, the method is applied to the design of general one dimensional (1D) and two dimensional (2D) architectures for Xilinx Virtex II/Pro FPGAs and, as an example, following the specific steps of the method, two 1D, bus based, architectures are designed. The architecture buses are compared with two state of the art solutions in terms of area and performance in the results section of the same Chapter. Chapter 3 is focused on reconfigurable systems on-chip communication issues, where the need of adaptability is the main topic. Again, a state of the art description of some 2D reconfigurable systems is presented at the beginning of the Chapter and, afterwards, an original solution, called Dynamic Reconfigurable NoC (DRNoC), is proposed. This solution covers different aspects. First, an architecture oriented to support adaptability in the on-chip communications is originally proposed. The architecture is mapped to a Virtex II FPGA by modifying a virtual architecture from the general ones presented in Chapter 2. Second, two types of reconfigurations that span through different levels of the OSI communication model are originally proposed. Third, a set of Network on Chip models, focused on the communication adaptability are designed and/or adapted and presented in the Chapter, along with an original NoC packet format and router architecture. These models are mapped to the DRNoC architecture and implementation cost parameters are defined and used to evaluate different implementation options. Regarding the architecture reconfigurability, it is important to remark that along the entire Chapter, intermediate test of possible partial reconfigurations and test results are included. At the end of the Chapter, the proposed architecture is compared with the state of the art using a set of structural parameters taken from a reference work and complemented with others defined in the Chapter. Chapter 4, focuses on the design tools and flows for partially reconfigurable systems. Again, an overview of the state of the art is included at the beginning of the Chapter. Abstract and Thesis Organization iv Afterwards, an original software solution for Virtex II configuration files (bitstreams) manipulations is presented. The first part of the solution is a study of the Virtex II/Pro FPGA bitstream format, used to define a set of equations for accessing a specific bitstream resource (at register or block level). Based on these equations, a set of tools for bitstream manipulation that target resource restricted devices are originally presented. Also, a design flow, based on systems and virtual architectures templates, which permits a straightforward core design by non partial reconfiguration experts and without knowing the system details, is originally proposed. In Chapter 5 four reconfigurable systems with different flexibility level, which corresponds to the level of the thesis proposals exploitation, are presented. The selected application domains attempt to demonstrate different advantages of the use of partial runtime reconfigurable systems and therefore are mainly a proof of concept. The first domain belongs to the wireless sensor networks, where t

AN INVESTIGATION OF AN ENERGY DIVERTING CONVERTER FOR HVDC APPLICATIONS

Wind power generation in Europe has experienced an unprecedented expansion fuelled by a very favourable regulatory framework promoted to fight climate change. It is currently the second largest power generation source accounting for 17% of the total energy mix and in 2016 it covered an impressive 10.4% of the total energy demand. With faster wind speeds and better availability, offshore wind farm developments have also experienced a surge in recent years. There are 12.7 GW of cumulative installed capacity with the hot spot located in the North Sea. The grid integration of offshore wind farms has evolved to meet the requirements of recent projects, much larger in power capacity and located farther offshore. High voltage direct current (HVDC) connections using state of the art multilevel voltage source converters are now the industry standard for distant wind farms, with transmission capacities of up to 1 GW. The scale of the projects and frequent grid weakness at the onshore locations challenge transmission system operators which need to ensure the entire grid stability. Grid codes have evolved to regulate such interconnections, with a set of well specified requirements which need to be fulfilled. One such requirement is the fault ride-through capability, which defines the need for the HVDC interconnector to remain connected during onshore grid faults. A Dynamic Braking System (DBS) is a power electronics device that provides fault ride-through capability to the HVDC interconnector by absorbing the excess energy injected to the link for the duration of the fault. This energy is commonly dissipated in a resistive element. In this way the DC over-voltage is avoided and the operation of the connected wind farms is kept undisturbed. There is a lack of knowledge in the design and implementation of such devices. Therefore four concepts put forward by industry and other researchers are studied in this work. The rating of the different components in each circuit is investigated as the basis for the comparison. Taking into account the modular structure of AC/DC converters in HVDC stations it makes commercial sense to reuse the same modules as building blocks for the DBS. With modular structures, a good balancing of the total energy stored in the converter and its distribution among the different modules is one of the key elements. Modular DBS circuits can synthesize multilevel voltage waveforms, allowing for advanced power modulation strategies. Two novel strategies are developed in the thesis and an accurate mathematical modelling is performed to ensure that the energy balance conditions are met for all points of operation. An overall control strategy for each of the four circuits is also developed and presented in the thesis. A good coordination of the protective actions of the DBS and the main HVDC converters is important to ensure that no negative interactions occur. An operation strategy based on over-voltage thresholds is developed in the thesis. Accurate simulation models of the HVDC link integrating the DBS and controls are also implemented to give the required degree of confidence in the overall system behaviour. These are finally validated by a laboratory scaled-down test platform, where the control actions and the different converters are implemented in real hardware, and the correct coordination of all the elements during a fault event is experimentally tested. The main drawback of the DBS solution usually highlighted in literature is its cost. The option of adding some extra functionality to better justify the economic investment is explored in this thesis, resulting on a multifunctional circuit named Energy Diverting Converter (EDC). Two proposals including active filtering and HVDC tapping are developed in this thesis, for which two patent applications have been filed

Advancements in Real-Time Simulation of Power and Energy Systems

Modern power and energy systems are characterized by the wide integration of distributed generation, storage and electric vehicles, adoption of ICT solutions, and interconnection of different energy carriers and consumer engagement, posing new challenges and creating new opportunities. Advanced testing and validation methods are needed to efficiently validate power equipment and controls in the contemporary complex environment and support the transition to a cleaner and sustainable energy system. Real-time hardware-in-the-loop (HIL) simulation has proven to be an effective method for validating and de-risking power system equipment in highly realistic, flexible, and repeatable conditions. Controller hardware-in-the-loop (CHIL) and power hardware-in-the-loop (PHIL) are the two main HIL simulation methods used in industry and academia that contribute to system-level testing enhancement by exploiting the flexibility of digital simulations in testing actual controllers and power equipment. This book addresses recent advances in real-time HIL simulation in several domains (also in new and promising areas), including technique improvements to promote its wider use. It is composed of 14 papers dealing with advances in HIL testing of power electronic converters, power system protection, modeling for real-time digital simulation, co-simulation, geographically distributed HIL, and multiphysics HIL, among other topics