Tightening the Bounds on Feasible Preemption Points

Caches have become invaluable for higher-end architectures to hide, in part, the increasing gap between processor speed and memory access times. While the effect of caches on timing predictability of single real-time tasks has been the focus of much research, bounding the overhead of cache warm-ups after preemptions remains a challenging problem, particularly for data caches. This paper makes multiple contributions. 1) We bound the penalty of cache interference for real-time tasks by providing accurate predictions of data cache behavior across preemptions, including instruction cache and pipeline effects. We show that, when considering cache preemption, the critical instant does not occur upon simultaneous release of all tasks. 2) We develop analysis methods to calculate upper bounds on the number of possible preemption points for each job of a task. To make these bounds tight, we consider the entire range between the best-case and worst-case execution times (BCET and WCET) of higher priority jobs. The effects of cache interference are integrated into the WCET calculations by using a feedback mechanism to interact with a static timing analyzer. Significant improvements in tightening bounds of up to an order of magnitude over two prior methods and up to half a magnitude over a third prior method are obtained by experiments for (a) the number of preemptions, (b) the WCET and (c) the response time of a task. Overall, this work contributes by calculating the worst-case preemption delay under consideration of data caches

Cache Related Pre-emption Delays in Embedded Real-Time Systems

Real-time systems are subject to stringent deadlines which make their temporal behaviour just as important as their functional behaviour. In multi-tasking real-time systems, the execution time of each task must be determined, and then combined together with information about the scheduling policy to ensure that there are enough resources to schedule all of the tasks. This is usually achieved by performing timing analysis on the individual tasks, and then schedulability analysis on the system as a whole. In systems with cache, multiple tasks can share this common resource which can lead to cache-related pre-emption delays (CRPD) being introduced. CRPD is the additional cost incurred from resuming a pre-empted task that no longer has the instructions or data it was using in cache, because the pre-empting task(s) evicted them from cache. It is therefore important to be able to account for CRPD when performing schedulability analysis. This thesis focuses on the effects of CRPD on a single processor system, further expanding our understanding of CRPD and ability to analyse and optimise for it. We present new CRPD analysis for Earliest Deadline First (EDF) scheduling that significantly outperforms existing analysis, and then perform the first comparison between Fixed Priority (FP) and EDF accounting for CRPD. In this comparison, we explore the effects of CRPD across a wide range of system and taskset parameters. We introduce a new task layout optimisation technique that maximises system schedulability via reduced CRPD. Finally, we extend CRPD analysis to hierarchical systems, allowing the effects of cache when scheduling multiple independent applications on a single processor to be analysed

A Review of Priority Assignment in Real-Time Systems

It is over 40 years since the first seminal work on priority assignment for real-time systems using fixed priority scheduling. Since then, huge progress has been made in the field of real-time scheduling with more complex models and schedulability analysis techniques developed to better represent and analyse real systems. This tutorial style review provides an in-depth assessment of priority assignment techniques for hard real-time systems scheduled using fixed priorities. It examines the role and importance of priority in fixed priority scheduling in all of its guises, including: preemptive and non-pre-emptive scheduling; covering single- and multi-processor systems, and networks. A categorisation of optimal priority assignment techniques is given, along with the conditions on their applicability. We examine the extension of these techniques via sensitivity analysis to form robust priority assignment policies that can be used even when there is only partial information available about the system. The review covers priority assignment in a wide variety of settings including: mixed-criticality systems, systems with deferred pre-emption, and probabilistic real-time systems with worstcase execution times described by random variables. It concludes with a discussion of open problems in the area of priority assignment

Bounding Preemption Delay within Data Cache Reference Patterns for Real-Time Tasks

Caches have become invaluable for higher-end architectures to hide, in part, the increasing gap between processor speed and memory access times. While the effect of caches on timing predictability of single real-time tasks has been the focus of much research, bounding the overhead of cache warm-ups after preemptions remains a challenging problem, particularly for data caches. In this paper, we bound the penalty of cache interference for real-time tasks by providing accurate predictions of the data cache behavior across preemptions. For every task, we derive data cache reference patterns for all scalar and non-scalar references. Partial timing of a task is performed up to a preemption point using these patterns. The effects of cache interference are then analyzed using a settheoretic approach, which identifies the number and location of additional misses due to preemption. A feedback mechanism provides the means to interact with the timing analyzer, which subsequently times another interval of a task bounded by the next preemption. Our experimental results demonstrate that it is sufficient to consider the n most expensive preemption points, where n is the maximum possible number of preemptions. Further, it is shown that such accurate modeling of data cache behavior in preemptive systems significantly improves the WCET predictions for a task. To the best of our knowledge, our work of bounding preemption delay for data caches is unprecedented

Architectural performance analysis of FPGA synthesized LEON processors

Current processors have gone through multiple internal opti- mization to speed-up the average execution time e.g. pipelines, branch prediction. Besides, internal communication mechanisms and shared resources like caches or buses have a sig- nificant impact on Worst-Case Execution Times (WCETs). Having an accurate estimate of a WCET is now a challenge. Probabilistic approaches provide a viable alternative to single WCET estimation. They consider WCET as a probabilistic distribution associated to uncertainty or risk. In this paper, we present synthetic benchmarks and associated analysis for several LEON3 configurations on FPGA targets. Benchmarking exposes key parameters to execution time variability allowing for accurate probabilistic modeling of system dynamics. We analyze the impact of architecture- level configurations on average and worst-case behaviors

Randomized Caches Can Be Pretty Useful to Hard Real-Time Systems

Cache randomization per se, and its viability for probabilistic timing analysis (PTA) of critical real-time systems, are receiving increasingly close attention from the scientific community and the industrial practitioners. In fact, the very notion of introducing randomness and probabilities in time-critical systems has caused strenuous debates owing to the apparent clash that this idea has with the strictly deterministic view traditionally held for those systems. A paper recently appeared in LITES (Reineke, J. (2014). Randomized Caches Considered Harmful in Hard Real-Time Systems. LITES, 1(1), 03:1-03:13.) provides a critical analysis of the weaknesses and risks entailed in using randomized caches in hard real-time systems. In order to provide the interested reader with a fuller, balanced appreciation of the subject matter, a critical analysis of the benefits brought about by that innovation should be provided also. This short paper addresses that need by revisiting the array of issues addressed in the cited work, in the light of the latest advances to the relevant state of the art. Accordingly, we show that the potential benefits of randomized caches do offset their limitations, causing them to be - when used in conjunction with PTA - a serious competitor to conventional designs

High Performance Embedded Computing

Nowadays, the prevalence of computing systems in our lives is so ubiquitous that we live in a cyber-physical world dominated by computer systems, from pacemakers to cars and airplanes. These systems demand for more computational performance to process large amounts of data from multiple data sources with guaranteed processing times. Actuating outside of the required timing bounds may cause the failure of the system, being vital for systems like planes, cars, business monitoring, e-trading, etc. High-Performance and Time-Predictable Embedded Computing presents recent advances in software architecture and tools to support such complex systems, enabling the design of embedded computing devices which are able to deliver high-performance whilst guaranteeing the application required timing bounds. Technical topics discussed in the book include: Parallel embedded platforms Programming models Mapping and scheduling of parallel computations Timing and schedulability analysis Runtimes and operating systemsThe work reflected in this book was done in the scope of the European project P SOCRATES, funded under the FP7 framework program of the European Commission. High-performance and time-predictable embedded computing is ideal for personnel in computer/communication/embedded industries as well as academic staff and master/research students in computer science, embedded systems, cyber-physical systems and internet-of-things

High-Performance and Time-Predictable Embedded Computing

Nowadays, the prevalence of computing systems in our lives is so ubiquitous that we live in a cyber-physical world dominated by computer systems, from pacemakers to cars and airplanes. These systems demand for more computational performance to process large amounts of data from multiple data sources with guaranteed processing times. Actuating outside of the required timing bounds may cause the failure of the system, being vital for systems like planes, cars, business monitoring, e-trading, etc. High-Performance and Time-Predictable Embedded Computing presents recent advances in software architecture and tools to support such complex systems, enabling the design of embedded computing devices which are able to deliver high-performance whilst guaranteeing the application required timing bounds. Technical topics discussed in the book include: Parallel embedded platforms Programming models Mapping and scheduling of parallel computations Timing and schedulability analysis Runtimes and operating systems The work reflected in this book was done in the scope of the European project P SOCRATES, funded under the FP7 framework program of the European Commission. High-performance and time-predictable embedded computing is ideal for personnel in computer/communication/embedded industries as well as academic staff and master/research students in computer science, embedded systems, cyber-physical systems and internet-of-things.info:eu-repo/semantics/publishedVersio