Design of Negative Bias Temperature Instability (NBTI) Tolerant Register File

Degradation of transistor parameter values due to Negative Bias Temperature Instability (NBTI) has emerged as a major reliability problem in current and future technology generations. NBTI Aging of a Static Random Access Memory (SRAM) cell leads to a lower noise margin, thereby increasing the failure rate. The register file, which consists of an array of SRAM cells, can suffer from data loss, leading to a system failure. In this work, we study the source of NBTI stress in an architecture and physical register file. Based on our study, we modified the register file structure to reduce the NBTI degradation and improve the overall system reliability. Having evaluated new register file structures, we find that our techniques substantially improve reliability of the register files. The new register files have small overhead, while in some cases they provide saving in area and power

Multi-criteria optimization for energy-efficient multi-core systems-on-chip

The steady down-scaling of transistor dimensions has made possible the evolutionary progress leading to today’s high-performance multi-GHz microprocessors and core based System-on-Chip (SoC) that offer superior performance, dramatically reduced cost per function, and much-reduced physical size compared to their predecessors. On the negative side, this rapid scaling however also translates to high power densities, higher operating temperatures and reduced reliability making it imperative to address design issues that have cropped up in its wake. In particular, the aggressive physical miniaturization have increased CMOS fault sensitivity to the extent that many reliability constraints pose threat to the device normal operation and accelerate the onset of wearout-based failures. Among various wearout-based failure mechanisms, Negative biased temperature instability (NBTI) has been recognized as the most critical source of device aging. The urge of reliable, low-power circuits is driving the EDA community to develop new design techniques, circuit solutions, algorithms, and software, that can address these critical issues. Unfortunately, this challenge is complicated by the fact that power and reliability are known to be intrinsically conflicting metrics: traditional solutions to improve reliability such as redundancy, increase of voltage levels, and up-sizing of critical devices do contrast with traditional low-power solutions, which rely on compact architectures, scaled supply voltages, and small devices. This dissertation focuses on methodologies to bridge this gap and establishes an important link between low-power solutions and aging effects. More specifically, we proposed new architectural solutions based on power management strategies to enable the design of low-power, aging aware cache memories. Cache memories are one of the most critical components for warranting reliable and timely operation. However, they are also more susceptible to aging effects. Due to symmetric structure of a memory cell, aging occurs regardless of the fact that a cell (or word) is accessed or not. Moreover, aging is a worst-case matric and line with worst-case access pattern determines the aging of the entire cache. In order to stop the aging of a memory cell, it must be put into a proper idle state when a cell (or word) is not accessed which require proper management of the idleness of each atomic unit of power management. We have proposed several reliability management techniques based on the idea of cache partitioning to alleviate NBTI-induced aging and obtain joint energy and lifetime benefits. We introduce graceful degradation mechanism which allows different cache blocks into which a cache is partitioned to age at different rates. This implies that various sub-blocks become unreliable at different times, and the cache keeps functioning with reduced efficiency. We extended the capabilities of this architecture by integrating the concept of reconfigurable caches to maintain the performance of the cache throughout its lifetime. By this strategy, whenever a block becomes unreliable, the remaining cache is reconfigured to work as a smaller size cache with only a marginal degradation of performance. Many mission-critical applications require guaranteed lifetime of their operations and therefore the hardware implementing their functionality. Such constraints are usually enforced by means of various reliability enhancing solutions mostly based on redundancy which are not energy-friendly. In our work, we have proposed a novel cache architecture in which a smart use of cache partitions for redundancy allows us to obtain cache that meet a desired lifetime target with minimal energy consumption

NBTI Mitigation by Dynamic Partial Reconfiguration

FPGAs achieve smaller geometries and their reliability is becoming a severe issue. Non-functional prop- erties, as Negative Bias Temperature Instability, affect the device functionality. In this work a novel methodology to address this issue is described, exploiting FPGAs flexibility. Dynamic Partial Reconfiguration is used to minimize aging impact on FPGAs’ configuration memory

Exploiting Aging Benefits for the Design of Reliable Drowsy Cache Memories

In this paper, we show how beneficial effects of aging on static power consumption can be exploited to design reliable drowsy cache memories adopting dynamic voltage scaling(DVS) to reduce static power. First, we develop an analytical model allowing designers to evaluate the long-term threshold voltage degradation induced by bias temperature instability (BTI)in a drowsy cache memory. Through HSPICE simulations, we demonstrate that, as drowsy memories age, static power reduction techniques based on DVS become more effective because of reduction in sub-threshold current due to BTI aging. We develop a simulation framework to evaluate trade-offs between static power and reliability, and a methodology to properly select the “drowsy” data retention voltage. We then propose different architectures of a drowsy cache memory allowing designers to meet different power and reliability constraints. The performed HSPICE simulations show a soft error rate and static noise margin improvement up to 20.8% and 22.7%, respectively, compared to standard aging unaware drowsy technique. This is achieved with a limited static power increase during the very early lifetime, and with static energy saving of up to 37% in 10 years of operation, at no or very limited hardware overhead

An Aging-Aware GPU Register File Design Based on Data Redundancy

"© 2019 IEEE. Personal use of this material is permitted. Permissíon from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertisíng or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works."[EN] Nowadays, GPUs sit at the forefront of high-performance computing thanks to their massive computational capabilities. Internally, thousands of functional units, architected to be fed by large register files, fuel such a performance. At deep nanometer technologies, the SRAM memory cells that implement GPU register files are very sensitive to the Negative Bias Temperature Instability (NBTI) effect. NBTI ages cell transistors by degrading their threshold voltage Vth over the lifetime of the GPU. This degradation, which manifests when a cell keeps the same logic value for a relatively long period of time, compromises the cell read stability and increases the transistor switching delay, which can lead to wrong read values and eventually exceed the processor cycle time, respectively, so resulting in faulty operation. Thiswork proposes architectural mechanisms leveraging the redundancy of the data stored in GPU register files to attack NBTI aging. The proposed mechanisms are based on data compression, power gating, and register address rotation techniques. All these mechanismsworking together balance the distribution of logic values stored in the cells along the execution time, reducing both the overall Vth degradation and the increase in the transistor switching delays. Experimental results show that a conventional GPU register file suffers the worst case for NBTI, since a significant fraction of the cells maintain the same logic value during the entire application execution (i.e., a 100 percent '0' and '1' duty cycle distributions). On average, the proposal reduces these distributions by 58 and 68 percent, respectively, which translates into Vth degradation savings by 54 and 62 percent, respectively.This work was supported by the Gobierno de Aragon and the European ESF (gaZ: T58_17R research group), and by the Ministerio de Economia y Competitividad (MINECO) and AEI/FEDER (EU) funds under Grants TIN2016-76635-C2-1-R and TIN2015-66972-C5-1-R.Valero Bresó, A.; Candel-Margaix, F.; Suárez-Gracia, D.; Petit Martí, SV.; Sahuquillo Borrás, J. (2019). An Aging-Aware GPU Register File Design Based on Data Redundancy. IEEE Transactions on Computers. 68(1):4-20. https://doi.org/10.1109/TC.2018.2849376S42068

BTI and leakage aware dynamic voltage scaling for reliable low power cache memories

We propose a novel dynamic voltage scaling (DVS)approach for reliable and energy efficient cache memories. First, we demonstrate that, as memories age, leakage power reduction techniques become more effective due to sub-threshold current reduction with aging. Then, we provide an analytical model and a design exploration framework to evaluate trade-offs between leakage power and reliability, and propose a BTI and leakage aware selection of the “drowsy” state retention voltage for DVS of cache memories. We propose three DVS policies, allowing us to achieve different power/reliability trade-offs. Through SPICE simulations, we show that a critical charge and a static noise margin increase up to 150% and 34.7%, respectively, is achieved compared to standard aging unaware drowsy technique, with a limited leakage power increase during the very early lifetime, and with leakage energy saving up to 37% in 10 years of operation. These improvements are attained at zero or negligible area cos

Online Nbti Wear-out Estimation

CMOS feature size scaling has been a source of dramatic performance gains, but it has come at a cost of on-chip wear-out. Negative Bias Temperature Instability (NBTI) is one of the main on-chip wear-out problems which questions the reliability of a chip. To check the accuracy of Reaction-Diffusion (RD) model, this work first proposes to compare the NBTI wear-out data from the RD wear-out model and the reliability simulator - Ultrasim RelXpert, by monitoring the activity of the register file on a Leon3 processor. The simulator wear-out data obtained is considered to be the baseline data and is used to tune the RD model using a novel technique time slicing. It turns out that the tuned RD model NBTI degradation is on an average 80% accurate with respect to RelXpert simulator and its calculation is approximately 8 times faster than the simulator. We come up with a waveform compression technique, for the activity waveforms from the Leon3 register file, which consumes 131KB compared to 256MB required without compression, and also provides 91% accuracy in NBTI degradation, compared to the same obtained without compression. We also propose a NBTI ΔVth estimation/prediction technique to reduce the time consumption of the tuned RD model threshold voltage calculation by an order of with one day degradation being 93% within the same of the tuned RD model. This work further proposes to a novel NBTI Degradation Predictor (NDP), to predict the future NBTI degradation, in a DE2 FPGA for WCET benchmarks. Also we measure the ΔVth variation across the 4 corners of the DE2 FPGA running a single Leon3, which varies from 0.08% to 0.11% of the base Vth