Secure Network-on-Chip Against Black Hole and Tampering Attacks

The Network-on-Chip (NoC) has become the communication heart of Multiprocessors-System-on-Chip (MPSoC). Therefore, it has been subject to a plethora of security threats to degrade the system performance or steal sensitive information. Due to the globalization of the modern semiconductor industry, many different parties take part in the hardware design of the system. As a result, the NoC could be infected with a malicious circuit, known as a Hardware Trojan (HT), to leave a back door for security breach purposes. HTs are smartly designed to be too small to be uncovered by offline circuit-level testing, so the system requires an online monitoring to detect and prevent the HT in runtime. This dissertation focuses on HTs inside the router of a NoC designed by a third party. It explores two HT-based threat models for the MPSoC, where the NoC experiences packet-loss and packet-tampering once the HT in the infected router is activated and is in the attacking state. Extensive experiments for each proposed architecture were conducted using a cycle-accurate simulator to demonstrate its effectiveness on the performance of the NoC-based system. The first threat model is the Black Hole Router (BHR) attack, where it silently discards the packets that are passing through without further announcement. The effect of the BHR is presented and analyzed to show the potency of the attack on a NoC-based system. A countermeasure protocol is proposed to detect the BHR at runtime and counteract the deliberate packet-dropping attack with a 26.9% area overhead, an average 21.31% performance overhead and a 22% energy consumption overhead. The protocol is extended to provide an efficient and power-gated scheme to enhance the NoC throughput and reduce the energy consumption by using end-to-end (e2e) approach. The power-gated e2e technique locates the BHR and avoids it with a 1% performance overhead and a 2% energy consumption overhead. The second threat model is a packet-integrity attack, where the HT tampers with the packet to apply a denial-of-service attack, steal sensitive information, gain unauthorized access, or misroute the packet to an unintended node. An authentic and secure NoC platform is proposed to detect and countermeasure the packet-tampering attack to maintain data-integrity and authenticity while keeping its secrecy with a 24.21% area overhead. The proposed NoC architecture is not only able to detect the attack, but also locates the infected router and isolates it from the network

Effectiveness of HT-assisted Sinkhole and Blackhole Denial of Service Attacks Targeting Mesh Networks-on-chip

There are ample opportunities at both design and manufacturing phases to meddle in a many-core chip system, especially its underlining communication fabric, known as the networks-on-chip (NoC), through the inclusion of malicious hardware Trojans (HT). In this paper, we focus on studying two specific HT-assisted Denial-of-Service (DoS) attacks, namely the sinkhole and blackhole attacks, that directly target the NoC of a many-core chip. As of the blackhole attacks, those intermediate routers with inserted HTs can stop forwarding data packets/flits towards the packets’ destination; instead, packets are either dropped from the network or diverted to some other malicious nodes. Sinkhole attacks, which exhibit similar attack effects as blackhole attacks, can occur when the NoC supports adaptive routing. In this case, a malicious node actively solicits packets from its neighbor nodes by pretending to have sufficient free buffer slots. Effects and efficiencies of both sinkhole and blackhole DoS attacks are modeled and quantified in this paper, and a few factors that influence attack effects are found to be critical. Through fine-tuning of these parameters, both attacks are shown to cause more damages to the NoC, measured as over 30% increase in packet loss rate. Even with current detection and defense methods in place, the packet loss rate is still remarkably high, suggesting the need of new and more effective detection and defense methods against the enhanced blackhole and sinkhole attacks as described in the paper

Anti-Tamper Method for Field Programmable Gate Arrays Through Dynamic Reconfiguration and Decoy Circuits

As Field Programmable Gate Arrays (FPGAs) become more widely used, security concerns have been raised regarding FPGA use for cryptographic, sensitive, or proprietary data. Storing or implementing proprietary code and designs on FPGAs could result in the compromise of sensitive information if the FPGA device was physically relinquished or remotely accessible to adversaries seeking to obtain the information. Although multiple defensive measures have been implemented (and overcome), the possibility exists to create a secure design through the implementation of polymorphic Dynamically Reconfigurable FPGA (DRFPGA) circuits. Using polymorphic DRFPGAs removes the static attributes from their design; thus, substantially increasing the difficulty of successful adversarial reverse-engineering attacks. A variety of dynamically reconfigurable methodologies exist for implementation that challenge designers in the reconfigurable technology field. A Hardware Description Language (HDL) DRFPGA model is presented for use in security applications. The Very High Speed Integrated Circuit HDL (VHSIC) language was chosen to take advantage of its capabilities, which are well suited to the current research. Additionally, algorithms that explicitly support granular autonomous reconfiguration have been developed and implemented on the DRFPGA as a means of protecting its designs. Documented testing validates the reconfiguration results and compares power usage, timing, and area estimates from a conventional and DRFPGA model

Security techniques for sensor systems and the Internet of Things

Sensor systems are becoming pervasive in many domains, and are recently being generalized by the Internet of Things (IoT). This wide deployment, however, presents significant security issues. We develop security techniques for sensor systems and IoT, addressing all security management phases. Prior to deployment, the nodes need to be hardened. We develop nesCheck, a novel approach that combines static analysis and dynamic checking to efficiently enforce memory safety on TinyOS applications. As security guarantees come at a cost, determining which resources to protect becomes important. Our solution, OptAll, leverages game-theoretic techniques to determine the optimal allocation of security resources in IoT networks, taking into account fixed and variable costs, criticality of different portions of the network, and risk metrics related to a specified security goal. Monitoring IoT devices and sensors during operation is necessary to detect incidents. We design Kalis, a knowledge-driven intrusion detection technique for IoT that does not target a single protocol or application, and adapts the detection strategy to the network features. As the scale of IoT makes the devices good targets for botnets, we design Heimdall, a whitelist-based anomaly detection technique for detecting and protecting against IoT-based denial of service attacks. Once our monitoring tools detect an attack, determining its actual cause is crucial to an effective reaction. We design a fine-grained analysis tool for sensor networks that leverages resident packet parameters to determine whether a packet loss attack is node- or link-related and, in the second case, locate the attack source. Moreover, we design a statistical model for determining optimal system thresholds by exploiting packet parameters variances. With our techniques\u27 diagnosis information, we develop Kinesis, a security incident response system for sensor networks designed to recover from attacks without significant interruption, dynamically selecting response actions while being lightweight in communication and energy overhead

Intrusion Detection System for detecting internal threats in 6LoWPAN

6LoWPAN (IPv6 over Low-power Wireless Personal Area Network) is a standard developed by the Internet Engineering Task Force group to enable the Wireless Sensor Networks to connect to the IPv6 Internet. This standard is rapidly gaining popularity for its applicability, ranging extensively from health care to environmental monitoring. Security is one of the most crucial issues that need to be considered properly in 6LoWPAN. Common 6LoWPAN security threats can come from external or internal attackers. Cryptographic techniques are helpful in protecting the external attackers from illegally joining the network. However, because the network devices are commonly not tampered-proof, the attackers can break the cryptography codes of such devices and use them to operate like an internal source. These malicious sources can create internal attacks, which may downgrade significantly network performance. Protecting the network from these internal threats has therefore become one of the centre security problems on 6LoWPAN. This thesis investigates the security issues created by the internal threats in 6LoWPAN and proposes the use of Intrusion Detection System (IDS) to deal with such threats. Our main works are to categorise the 6LoWPAN threats into two major types, and to develop two different IDSs to detect each of this type effectively. The major contributions of this thesis are summarised as below. First, we categorise the 6LoWPAN internal threats into two main types, one that focuses on compromising directly the network performance (performance-type) and the other is to manipulate the optimal topology (topology-type), to later downgrade the network service quality indirectly. In each type, we select some typical threats to implement, and assess their particular impacts on network performance as well as identify performance metrics that are sensitive in the attacked situations, in order to form the basis detection knowledge. In addition, on studying the topology-type, we propose several novel attacks towards the Routing Protocol for Low Power and Lossy network (RPL - the underlying routing protocol in 6LoWPAN), including the Rank attack, Local Repair attack and DIS attack. Second, we develop a Bayesian-based IDS to detect the performance-type internal threats by monitoring typical attacking targets such as traffic, channel or neighbour nodes. Unlike other statistical approaches, which have a limited view by just using a single metric to monitor a specific attack, our Bayesian-based IDS can judge an abnormal behaviour with a wiser view by considering of different metrics using the insightful understanding of their relations. Such wiser view helps to increase the IDS’s accuracy significantly. Third, we develop a Specification-based IDS module to detect the topology-type internal threats based on profiling the RPL operation. In detail, we generalise the observed states and transitions of RPL control messages to construct a high-level abstract of node operations through analysing the trace files of the simulations. Our profiling technique can form all of the protocol’s legal states and transitions automatically with corresponding statistic data, which is faster and easier to verify compare with other manual specification techniques. This IDS module can detect the topology-type threats quickly with a low rate of false detection. We also propose a monitoring architecture that uses techniques from modern technologies such as LTE (Long-term Evolution), cloud computing, and multiple interface sensor devices, to expand significantly the capability of the IDS in 6LoWPAN. This architecture can enable the running of both two proposed IDSs without much overhead created, to help the system to deal with most of the typical 6LoWPAN internal threats. Overall, the simulation results in Contiki Cooja prove that our two IDS modules are effective in detecting the 6LoWPAN internal threats, with the detection accuracy is ranging between 86 to 100% depends on the types of attacks, while the False Positive is also satisfactory, with under 5% for most of the attacks. We also show that the additional energy consumptions and the overhead of the solutions are at an acceptable level to be used in the 6LoWPAN environment

CARD: Concealed and remote discovery of IoT devices in victims\u27 home networks

Smart devices are becoming more common in the standard households. They range from lights to refrigerators and their functionality and applications continues to grow with consumer demand. This increase in networked, complex devices has also brought an increase in vulnerabilities in the average consumer\u27s home. There now exists an Internet of Things (IoT) ecosystem that creates new attack vectors for adversaries to spread malware, build botnets, and participate in other malicious activities. We will overview some of these new attack vectors as well as go over a framework that would allow an adversary to target a user\u27s home network and any other networks that user may join --Abstract, page iii

Cybersecurity Methods for Grid-Connected Power Electronics

The present work shows a secure-by-design process, defense-in-depth method, and security techniques for a secure distributed energy resource. The distributed energy resource is a cybersecure, solar inverter and battery energy storage system prototype, collectively called the Cybersecure Power Router. Consideration is given to the use of the Smart Green Power Node for a foundation of the present work. Metrics for controller security are investigated to evaluate firmware security techniques. The prototype\u27s ability to mitigate, respond to, and recover from firmware integrity degradation is examined. The prototype shows many working security techniques within the context of a grid-connected, distributed energy resource. Further work is expected in the Cybersecure Power Router project. Consideration is also provided for the migration of the present research and the Smart Green Power Node to realize a pre-production prototype

An architecture framework for enhanced wireless sensor network security

This thesis develops an architectural framework to enhance the security of Wireless Sensor Networks (WSNs) and provides the implementation proof through different security countermeasures, which can be used to establish secure WSNs, in a distributed and self-healing manner. Wireless Sensors are used to monitor and control environmental properties such as sound, acceleration, vibration, air pollutants, and temperature. Due to their limited resources in computation capability, memory and energy, their security schemes are susceptible to many kinds of security vulnerabilities. This thesis investigated all possible network attacks on WSNs and at the time of writing, 19 different types of attacks were identified, all of which are discussed including exposures to the attacks, and the impact of those attacks. The author then utilises this work to examine the ZigBee series, which are the new generation of wireless sensor network products with built-in layered security achieved by secure messaging using symmetric cryptography. However, the author was able to uniquely identify several security weaknesses in ZigBee by examining its protocol and launching the possible attacks. It was found that ZigBee is vulnerable to the following attacks, namely: eavesdropping, replay attack, physical tampering and Denial of Services (DoS). The author then provides solutions to improve the ZigBee security through its security schema, including an end-to-end WSN security framework, architecture design and sensor configuration, that can withstand all types of attacks on the WSN and mitigate ZigBee’s WSN security vulnerabilities

Design of a Secure Transmission System for Secure Key Injection During Initialization Phase of IOT Devices

In the last decade society has experienced an exponential growth in the number of devices connected to the Internet. Recently, new gadgets called Internet of Things devices have appeared in our homes. Although they often lack a physical interface to directly interact with them, they are able to read information from sensors and autonomously communicate with servers, performing decisions accordingly. However, most of the domestic devices that are being commercialized do not implement strict security policies, potentially leading to security breaches that compromise the user’s privacy. The following work provides an alternative to the WPS technology in the initial setup phase of these devices, in which the gadget has to be loaded with the Wi-Fi key so it can connect to the Internet. The use of infrared technology implementing a Diffie-Hellman key exchange protocol to inject this key makes the process much safer, without compromising the cost of the device or the user experience