Correlations in the (Sub)millimeter Background from ACT × BLAST

We present measurements of the auto- and cross-frequency correlation power spectra of the cosmic (sub)millimeter background at 250, 350, and 500 μm (1200, 860, and 600 GHz) from observations made with the Balloon-borne Large Aperture Submillimeter Telescope (BLAST); and at 1380 and 2030 μm (218 and 148 GHz) from observations made with the Atacama Cosmology Telescope (ACT). The overlapping observations cover 8.6 deg^2 in an area relatively free of Galactic dust near the south ecliptic pole. The ACT bands are sensitive to radiation from the cosmic microwave background, to the Sunyaev-Zel'dovich effect from galaxy clusters, and to emission by radio and dusty star-forming galaxies (DSFGs), while the dominant contribution to the BLAST bands is from DSFGs. We confirm and extend the BLAST analysis of clustering with an independent pipeline and also detect correlations between the ACT and BLAST maps at over 25σ significance, which we interpret as a detection of the DSFGs in the ACT maps. In addition to a Poisson component in the cross-frequency power spectra, we detect a clustered signal at 4σ, and using a model for the DSFG evolution and number counts, we successfully fit all of our spectra with a linear clustering model and a bias that depends only on redshift and not on scale. Finally, the data are compared to, and generally agree with, phenomenological models for the DSFG population. This study demonstrates the constraining power of the cross-frequency correlation technique to constrain models for the DSFGs. Similar analyses with more data will impose tight constraints on future models

Understanding and Improving the Soil Moisture Retrieval Algorithm under Space, Time and Heterogeneity

The spatial and temporal monitoring of soil moisture from remote sensing platforms plays a pivotal role in predicting the future food and water security. That is, improving soil moisture estimation at remote sensing platforms has remarkable impacts in the fields of meteorology, hydrology, agriculture, and global climate change. However, remote sensing of soil moisture for long is hindered by spatial heterogeneity in land surface variables (soil, biomass, topography, and temperature) which cause systematic and random errors in soil moisture retrievals. Most soil moisture improvement methods to date focused on the downscaling of either coarse resolution soil moisture or brightness temperature based on fine scale ancillary information of land surface variables. Comparatively little work has been done on improving the parameterization of most sensitive variables to radiative transfer model that impact soil moisture retrieval accuracy. In addition, the classic radiative transfer model assumes the vegetation and surface roughness parameters, as constant with space and time which undermines the retrieval accuracy. Also, it is largely elusive so far the discussion on the non-linearity of microwave radiative transfer model and its relationship with energy and water fluxes. In order to address the above mentioned limitations, this dissertation aims to develop and validate a soil moisture modeling framework with associated improved parameterizations for surface roughness and vegetation optical depth (VOD) in the homogeneous and heterogeneous environments. To this end, the following research work is specifically conducted: (a) conduct comprehensive sensitivity analysis on radiative transfer model with space, time and hydroclimates; (b) develop multi-scale surface roughness model which incorporates small (soil) and large (topography) surface undulations to improve soil moisture retrievals; (c) improve the parameterization of vegetation topical depth (VOD) using within-pixel biomass heterogeneity to improved soil moisture accuracy; (d) investigate the non-linearity in microwave radiative transfer model, and its association with thermal energy fluxes. The results of this study showed that: (a) the total (linear + non-linear) sensitivity of soil, temperature and biomass variables varied with spatial scale (support), time, and hydro climates, with higher non-linearity observed for dense biomass regions. This non-linearity is also governed by soil moisture availability and temperature. Among these variables, surface roughness and vegetation optical depth are most sensitive variables to radiative transfer model (RTM); (b) considering the spatial and temporal variability in parameterization of surface roughness and VOD has improved soil moisture retrieval accuracy, importantly in cropland and forest environments; and (c) the soil moisture estimated through evaporative fraction (EF) correlates higher with VOD corrected soil moisture

Development Of An Improved Microwave Ocean Surface Emissivity Radiative Transfer Model

An electromagnetic model is developed for predicting the microwave blackbody emission from the ocean surface over a wide range of frequencies, incidence angles, and wind vector (speed and direction) for both horizontal and vertical polarizations. This ocean surface emissivity model is intended to be incorporated into an oceanic radiative transfer model to be used for microwave radiometric applications including geophysical retrievals over oceans. The model development is based on a collection of published ocean emissivity measurements obtained from satellites, aircraft, field experiments, and laboratory measurements. This dissertation presents the details of methods used in the ocean surface emissivity model development and comparisons with current emissivity models and aircraft radiometric measurements in hurricanes. Especially, this empirically derived ocean emissivity model relates changes in vertical and horizontal polarized ocean microwave brightness temperature measurements over a wide range of observation frequencies and incidence angles to physical roughness changes in the ocean surface, which are the result of the air/sea interaction with surface winds. Of primary importance are the Stepped Frequency Microwave Radiometer (SFMR) brightness temperature measurements from hurricane flights and independent measurements of surface wind speed that are used to define empirical relationships between C-band (4 - 7 GHz) microwave brightness temperature and surface wind speed. By employing statistical regression techniques, we develop a physical-based ocean emissivity model with empirical coefficients that depends on geophysical parameters, such as wind speed, wind direction, sea surface temperature, and observational parameters, such as electromagnetic frequency, electromagnetic polarization, and incidence angle

Statistical Characterization of Bare Soil Surface Microrelief

Because the soil surface occurs at the boundary between the atmosphere and the pedosphere, it plays an important role for geomorphologic processes. Roughness of soil surface is a key parameter to understand soil properties and physical processes related to substrate movement, water infiltration or runoff, and soil erosion. It has been noted by many authors that most of the soil surface and water interaction processes have characteristic lengths in millimeter scales. Soil irregularities at small scale, such as aggregates, clods and interrill depressions, influence water outflow and infiltration rate. They undergo rapid changes caused by farming imple‐ ments, followed by a slow evolution due to rainfall events. Another objective of soil surface roughness study is investigating the effects of different tillage implements on soil physical properties (friability, compaction, fragmentation and water content) to obtain an optimal crop emergence. Seedbed preparation focuses on the creation of fine aggregates and the size distribution of aggregates and clods produced by tillage operations is frequently measured. Active microwave remote sensing allows potential monitoring of soil surface roughness or moisture retrieving at field scale using space-based Synthetic Aperture Radars (SAR) with high spatial resolution (metric or decametric). The scattering of microwaves depends on several surface characteristics as well as on imagery configuration. The SAR signal is very sensitive to soil surface irregularities and structures (clod arrangement, furrows) and moisture content in the first few centimeters of soil (depending on the radar wavelength). In order to link the remote sensing observations to scattering physical models as well as for modelling purpose, key features of the soil microtopography should be characterized. However, this characteri‐ zation is not fully understood and some dispersion of roughness parameters can be observed in the same field according to the methodology used. It seems also, that when describing surface roughness as a whole, some information related to structured elements of the micro‐ topography is lost

A Facet-Based Numerical Model for Simulating SAR Altimeter Echoes From Heterogeneous Sea Ice Surfaces

Cryosat-2 has provided measurements of pan-Arctic sea ice thickness since 2010 with unprecedented spatial coverage and frequency. However, it remains uncertain how the Ku-band radar interacts with the vast range of scatterers that can be present within the satellite footprint, including sea ice with varying physical properties and multi-scale roughness, snow cover, and leads. Here, we present a numerical model designed to simulate delay-Doppler SAR (Synthetic Aperture Radar) altimeter echoes from snow-covered sea ice, such as those detected by Cryosat-2. Backscattered echoes are simulated directly from triangular facetbased models of actual sea ice topography generated from Operation IceBridge Airborne Topographic Mapper (ATM) data, as well as virtual statistical models simulated artificially. We use these waveform simulations to investigate the sensitivity of SAR altimeter echoes to variations in satellite parameters (height, pitch, roll) and sea ice properties (physical properties, roughness, presence of water). We show that the conventional Gaussian assumption for sea ice surface roughness may be introducing significant error into the Cryosat-2 waveform retracking process. Compared to a more representative lognormal surface, an echo simulated from a Gaussian surface with rms roughness height of 0.2 m underestimates the ice freeboard by 5 cm – potentially underestimating sea ice thickness by around 50 cm. We present a set of ‘ideal’ waveform shape parameters simulated for sea ice and leads to inform existing waveform classification techniques. This model will ultimately be used to improve retrievals of key sea ice properties, including freeboard, surface roughness and snow depth, from SAR altimeter observations