Design of Frequency divider with voltage vontrolled oscillator for 60 GHz low power phase-locked loops in 65 nm RF CMOS

Increasing memory capacity in mobile devices, is driving the need of high-data rates equipment. The 7 GHz band around 60 GHz provides the opportunity for multi-gigabit/sec wireless communication. It is a real opportunity for developing next generation of High-Definition (HD) devices. In the last two decades there was a great proliferation of Voltage Controlled Oscillator (VCO) and Frequency Divider (FD) topologies in RF ICs on silicon, but reaching high performance VCOs and FDs operating at 60 GHz is in today's technology a great challenge. A key reason is the inaccuracy of CMOS active and passive device models at mm-W. Three critical issues still constitute research objectives at 60 GHz in CMOS: generation of the Local Oscillator (LO) signal (1), division of the LO signal for the Phase-Locked Loop (PLL) closed loop (2) and distribution of the LO signal (3). In this Thesis, all those three critical issues are addressed and experimentally faced-up: a divide-by-2 FD for a PLL of a direct-conversion transceiver operating at mm-W frequencies in 65 nm RF CMOS technology has been designed. Critical issues such as Process, Voltage and Temperature (PVT) variations, Electromagnetic (EM) simulations and power consumption are addressed to select and design a FD with high frequency dividing range. A 60 GHz VCO is co-designed and integrated in the same die, in order to provide the FD with mm-W input signal. VCOs and FDs play critical roles in the PLL. Both of them constitute the PLL core components and they would need co-design, having a big impact in the overall performance especially because they work at the highest frequency in the PLL. Injection Locking FD (ILFD) has been chosen as the optimum FD topology to be inserted in the control loop of mm-W PLL for direct-conversion transceiver, due to the high speed requirements and the power consumption constraint. The drawback of such topology is the limited bandwidth, resulting in narrow Locking Range (LR) for WirelessHDTM applications considering the impact of PVT variations. A simulation methodology is presented in order to analyze the ILFD locking state, proposing a first divide-by-2 ILFD design with continuous tuning. In order to design a wide LR, low power consumption ILFD, the impacts of various alternatives of low/high Q tank and injection scheme are deeply analysed, since the ILFD locking range depends on the Q of the tank and injection efficiency. The proposed 3-bit dual-mixing 60 GHz divide-by-2 LC-ILFD is designed with an accumulation of switching varactors binary scaled to compensate PVT variations. It is integrated in the same die with a 4-bit 60 GHz LC-VCO. The overall circuit is designed to allow measurements of the singles blocks stand-alone and working together. The co-layout is carried on with the EM modelling process of passives devices, parasitics and transmission lines extracted from the layout. The inductors models provided by the foundry are qualified up to 40 GHz, therefore the EM analysis is a must for post-layout simulation. The PVT variations have been simulated before manufacturing and, based on the results achieved, a PLL scheme PVT robust, considering frequency calibration, has been patented. The test chip has been measured in the CEA-Leti (Grenoble) during a stay of one week. The operation principle and the optimization trade-offs among power consumption, and locking ranges of the final selected ILFD topology have been demonstrated. Even if the experimental results are not completely in agreement with the simulations, due to modelling error and inaccuracy, the proposed technique has been validated with post-measurement simulations. As demonstrated, the locking range of a low-power, discrete tuned divide-by-2 ILFD can be enhanced by increasing the injection efficiency, without the drawbacks of higher power consumption and chip area. A 4-bits wide tuning range LC-VCO for mm-W applications has been co-designed using the selected 65 nm CMOS process.Postprint (published version

Biomedical Engineering

Biomedical engineering is currently relatively wide scientific area which has been constantly bringing innovations with an objective to support and improve all areas of medicine such as therapy, diagnostics and rehabilitation. It holds a strong position also in natural and biological sciences. In the terms of application, biomedical engineering is present at almost all technical universities where some of them are targeted for the research and development in this area. The presented book brings chosen outputs and results of research and development tasks, often supported by important world or European framework programs or grant agencies. The knowledge and findings from the area of biomaterials, bioelectronics, bioinformatics, biomedical devices and tools or computer support in the processes of diagnostics and therapy are defined in a way that they bring both basic information to a reader and also specific outputs with a possible further use in research and development

Bidirectional Propulsion of Devices Along the Gastrointestinal Tract Using Electrostimulation

This thesis describes a method for propelling devices such as video capsule endoscopes in either direction along the small intestines using electrostimulation-induced muscular contractions. When swallowed, passive diagnostic ‘one-shot’ devices rely on sporadic peristaltic movement, possibly missing vital ‘areas of interest’. This bidirectional propulsion method provides active control for that all-important ‘second look’. Design considerations, within the dimensional constraints, required a device shape that would achieve maximum propulsion from safely induced useful contractions produced by the electrodes and encapsulated miniature electrostimulator. Construction materials would have to produce minimal friction against the mucosal surface while having the physical properties to facilitate construction and electrode attachment. Design investigations included coefficient of friction measurements of different construction materials and the evaluation of different capsule and electrode dimensions over a range of stimulation parameters, to obtain optimal propulsion. A swallowable 11 mm diameter device was propelled at 121 mm/min with stimulation parameters of 12.5 Hz, 20 ms, at 20 V in an anaesthetised pig. A modified passive video capsule endoscope was propelled at 120 mm/min with stimulation parameters of 12.5 Hz, 20 ms, at 10 V in an unanaesthetised human volunteer. A radio-controlled capsule incorporating an electrostimulator, voltage converter and 3 V power supply was propelled at 60 mm/min with stimulation parameters of 12.5 Hz, 20 ms, and 30 V in an anaesthetised pig. 4 Other possible uses of electrostimulation were investigated including propulsion of anally administered large intestine devices and introduction of the intestinal mucosal surface into a biopsy chamber. Results are presented. The ultimate aim of the project was to provide bidirectional propulsion for wireless remote controlled devices along the gastrointestinal tract utilising contractile force produced by electrostimulation of the intestinal wall. The controllability of this system could provide clinicians with a real time view of the entire small intestines without surgical enteroscopy

Topical Workshop on Electronics for Particle Physics

The purpose of the workshop was to present results and original concepts for electronics research and development relevant to particle physics experiments as well as accelerator and beam instrumentation at future facilities; to review the status of electronics for the LHC experiments; to identify and encourage common efforts for the development of electronics; and to promote information exchange and collaboration in the relevant engineering and physics communities

Advances in Bioengineering

The technological approach and the high level of innovation make bioengineering extremely dynamic and this forces researchers to continuous updating. It involves the publication of the results of the latest scientific research. This book covers a wide range of aspects and issues related to advances in bioengineering research with a particular focus on innovative technologies and applications. The book consists of 13 scientific contributions divided in four sections: Materials Science; Biosensors. Electronics and Telemetry; Light Therapy; Computing and Analysis Techniques

Evaluating Techniques for Wireless Interconnected 3D Processor Arrays

In this thesis the viability of a wireless interconnect network for a highly parallel computer is investigated. The main theme of this thesis is to project the performance of a wireless network used to connect the processors in a parallel machine of such design. This thesis is going to investigate new design opportunities a wireless interconnect network can offer for parallel computing. A simulation environment is designed and implemented to carry out the tests. The results have shown that if the available radio spectrum is shared effectively between building blocks of the parallel machine, there are substantial chances to achieve high processor utilisation. The results show that some factors play a major role in the performance of such a machine. The size of the machine, the size of the problem and the communication and computation capabilities of each element of the machine are among those factors. The results show these factors set a limit on the number of nodes engaged in some classes of tasks. They have shown promising potential for further expansion and evolution of our idea to new architectural opportunities, which is discussed by the end of this thesis. To build a real machine of this type the architects would need to solve a number of challenging problems including heat dissipation, delivering electric power and Chip/board design; however, these issues are not part of this thesis and will be tackled in future

Proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress

Published proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress, hosted by York University, 27-30 May 2018

Bibliography of Lewis Research Center technical publications announced in 1993

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1993. All the publications were announced in the 1993 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses