Fault Tolerant Electronic System Design

Due to technology scaling, which means reduced transistor size, higher density, lower voltage and more aggressive clock frequency, VLSI devices may become more sensitive against soft errors. Especially for those devices used in safety- and mission-critical applications, dependability and reliability are becoming increasingly important constraints during the development of system on/around them. Other phenomena (e.g., aging and wear-out effects) also have negative impacts on reliability of modern circuits. Recent researches show that even at sea level, radiation particles can still induce soft errors in electronic systems. On one hand, processor-based system are commonly used in a wide variety of applications, including safety-critical and high availability missions, e.g., in the automotive, biomedical and aerospace domains. In these fields, an error may produce catastrophic consequences. Thus, dependability is a primary target that must be achieved taking into account tight constraints in terms of cost, performance, power and time to market. With standards and regulations (e.g., ISO-26262, DO-254, IEC-61508) clearly specify the targets to be achieved and the methods to prove their achievement, techniques working at system level are particularly attracting. On the other hand, Field Programmable Gate Array (FPGA) devices are becoming more and more attractive, also in safety- and mission-critical applications due to the high performance, low power consumption and the flexibility for reconfiguration they provide. Two types of FPGAs are commonly used, based on their configuration memory cell technology, i.e., SRAM-based and Flash-based FPGA. For SRAM-based FPGAs, the SRAM cells of the configuration memory highly susceptible to radiation induced effects which can leads to system failure; and for Flash-based FPGAs, even though their non-volatile configuration memory cells are almost immune to Single Event Upsets induced by energetic particles, the floating gate switches and the logic cells in the configuration tiles can still suffer from Single Event Effects when hit by an highly charged particle. So analysis and mitigation techniques for Single Event Effects on FPGAs are becoming increasingly important in the design flow especially when reliability is one of the main requirements

Optimizing Scrubbing by Netlist Analysis for FPGA Configuration Bit Classification and Floorplanning

Existing scrubbing techniques for SEU mitigation on FPGAs do not guarantee an error-free operation after SEU recovering if the affected configuration bits do belong to feedback loops of the implemented circuits. In this paper, we a) provide a netlist-based circuit analysis technique to distinguish so-called critical configuration bits from essential bits in order to identify configuration bits which will need also state-restoring actions after a recovered SEU and which not. Furthermore, b) an alternative classification approach using fault injection is developed in order to compare both classification techniques. Moreover, c) we will propose a floorplanning approach for reducing the effective number of scrubbed frames and d), experimental results will give evidence that our optimization methodology not only allows to detect errors earlier but also to minimize the Mean-Time-To-Repair (MTTR) of a circuit considerably. In particular, we show that by using our approach, the MTTR for datapath-intensive circuits can be reduced by up to 48.5% in comparison to standard approaches

Criticality Aware Soft Error Mitigation in the Configuration Memory of SRAM based FPGA

Efficient low complexity error correcting code(ECC) is considered as an effective technique for mitigation of multi-bit upset (MBU) in the configuration memory(CM)of static random access memory (SRAM) based Field Programmable Gate Array (FPGA) devices. Traditional multi-bit ECCs have large overhead and complex decoding circuit to correct adjacent multibit error. In this work, we propose a simple multi-bit ECC which uses Secure Hash Algorithm for error detection and parity based two dimensional Erasure Product Code for error correction. Present error mitigation techniques perform error correction in the CM without considering the criticality or the execution period of the tasks allocated in different portion of CM. In most of the cases, error correction is not done in the right instant, which sometimes either suspends normal system operation or wastes hardware resources for less critical tasks. In this paper,we advocate for a dynamic priority-based hardware scheduling algorithm which chooses the tasks for error correction based on their area, execution period and criticality. The proposed method has been validated in terms of overhead due to redundant bits, error correction time and system reliabilityComment: 6 pages, 8 figures, conferenc

Digital Design Techniques for Dependable High Performance Computing

As today’s process technologies continuously scale down, circuits become increasingly more vulnerable to radiation-induced soft errors in nanoscale VLSI technologies. The reduction of node capacitance and supply voltages coupled with increasingly denser chips are raising soft error rates and making them an important design issue. This research work is focused on the development of design techniques for high-reliability modern VLSI technologies, focusing mainly on Radiation-induced Single Event Transient. In this work, we evaluate the complete life-cycle of the SET pulse from the generation to the mitigation. A new simulation tool, Rad-Ray, has been developed to simulate and model the passage of heavy ion into the silicon matter of modern Integrated Circuit and predict the transient voltage pulse taking into account the physical description of the design. An analysis and mitigation tool has been developed to evaluate the propagation of the predicted SET pulses within the circuit and apply a selective mitigation technique to the sensitive nodes of the circuit. The analysis and mitigation tools have been applied to many industrial projects as well as the EUCLID space mission project, including more than ten modules. The obtained results demonstrated the effectiveness of the proposed tools

Total ionizing dose and single event upset testing of flash based field programmable gate arrays

The effectiveness of implementing field programmable gate arrays (FPGAs) in communication, military, space and high radiation environment applications, coupled with the increased accessibility of private individuals and researchers to launch satellites, has led to an increased interest in commercial off the shelf components. The metal oxide semiconductor (MOS) structures of FPGAs however, are sensitive to radiation effects which can lead to decreased reliability of the device. In order to successfully implement a FPGA based system in a radiation environment, such as on-board a satellite, the single event upset (SEU) and total ionizing dose (TID) characteristics of the device must first be established. This research experimentally determines a research procedure which could accurately determine the SEU cross sections and TID characteristics of various mitigation techniques as well as control circuits implemented in a ProASIC3 A3P1000 FPGA. To gain an understanding of the SEU effects of the implemented circuits, the test FPGA was irradiated by a 66MeV proton beam at the iTemba LABS facility. Through means of irradiation, the SEU cross section of various communication, motor control and mitigation schemes circuits, induced by high energy proton strikes was investigated. The implementation of a full global triple modular redundancy (TMR) and a combination of TMR and a AND-OR multiplexer filter was found to most effectively mitigate SEUs in comparison to the other techniques. When comparing the communication and motor control circuits, the high frequency I2C and SPI circuits experienced a higher number of upsets when compared to a low frequency servo motor control circuit. To gain a better understanding of the absorbed dose effects, experimental TID testing was conducted by irradiating the test FPGA with a cobalt-60 (Co-60) source. An accumulated absorbed dose resulted in the fluctuation of the device supply current and operating voltages as well as resulted in output errors. The TMR and TMR filtering combination mitigation techniques again were found to be the most effective methods of mitigation

Digital design techniques for dependable High-Performance Computing

L'abstract è presente nell'allegato / the abstract is in the attachmen

Using Fine Grain Approaches for highly reliable Design of FPGA-based Systems in Space

Nowadays using SRAM based FPGAs in space missions is increasingly considered due to their flexibility and reprogrammability. A challenge is the devices sensitivity to radiation effects that increased with modern architectures due to smaller CMOS structures. This work proposes fault tolerance methodologies, that are based on a fine grain view to modern reconfigurable architectures. The focus is on SEU mitigation challenges in SRAM based FPGAs which can result in crucial situations