Coherence-Multiplexed Optical RF Feeder Networks

An optical RF feeding system for wireless access is proposed, in which the radio access points are distinguished by means of coherence multiplexing (CM). CM is a rather unknown and potentially inexpensive optical code division multiple access technique, which is particularly suitable for relatively short-range applications with moderate transmission bandwidth requirements. Subcarrier multiplexing (SCM) can possibly be used on top of CM, either as single-channel or multichannel SCM. The performances of the resulting distribution networks are analyzed, incorporating the effect of chromatic dispersion, optical beat noise, shot noise, thermal noise, and—in the case of multichannel SCM—intermodulation distortion. The results of the IEEE 802.11b standard for wireless LAN.\u

Designing Power-Efficient Modulation Formats for Noncoherent Optical Systems

We optimize modulation formats for the additive white Gaussian noise channel with a nonnegative input constraint, also known as the intensity-modulated direct detection channel, with and without confining them to a lattice structure. Our optimization criteria are the average electrical and optical power. The nonnegativity input signal constraint is translated into a conical constraint in signal space, and modulation formats are designed by sphere packing inside this cone. Some remarkably dense packings are found, which yield more power-efficient modulation formats than previously known. For example, at a spectral efficiency of 1 bit/s/Hz, the obtained modulation format offers a 0.86 dB average electrical power gain and 0.43 dB average optical power gain over the previously best known modulation formats to achieve a symbol error rate of 10^-6. This modulation turns out to have a lattice-based structure. At a spectral efficiency of 3/2 bits/s/Hz and to achieve a symbol error rate of 10^-6, the modulation format obtained for optimizing the average electrical power offers a 0.58 dB average electrical power gain over the best lattice-based modulation and 2.55 dB gain over the best previously known format. However, the modulation format optimized for average optical power offers a 0.46 dB average optical power gain over the best lattice-based modulation and 1.35 dB gain over the best previously known format.Comment: Submitted to Globecom 201

Potential impacts for monitoring sustainability: case study of hollow fiber membrane

Sustainability level is a new indicator of quality and efficiency for product life cycle. Sustainability should be balanced among Triple Bottom Line (TBL) aspects namely environmental, economic and social elements. For monitoring the sustainability of product, a comprehensive framework considering potential impacts for sustainability assessment should be developed. Previously, several studies presented frameworks to assess the sustainability level. However, few studies relate their frameworks with the potential impact of all TBL. Determination of potential impacts with its parameter is important during framework development. Potential impacts for environmental such global warming, acidification and eutrophication should be taken seriously. In this study, potential impacts for each sustainability aspects are shown. For the case study of hollow fiber membrane the potential impacts were obtained from primary and secondary data such product specification, bill of materials, literature reviews and help of GaBi Software

Oil palm leaf fibre and its suitability for paper-based products

Due to the shortage of wood as origin materials for paper-based production, agro-residue materials have been explored in the quest of finding the best alternative fibre. Oil palm leaf (OPL) is one of agro-residue that has potential due to its comparable characteristics with wood fibre. Studies on chemical compositions, fibre morphology, and mechanical property of OPL have been carried out aiming to evaluate its potential as a substitute raw material for pulp and paper-based production. The chemical compositions were analysed according to the TAPPI standard, Kurscher-Hoffner and chlorite methods accordingly. The mechanical property (tensile, tearing and bursting strengths) were determined as described in TAPPI test methods. Fibre dimensions were determined using Franklin method and analysed under the optical microscope. The content of cellulose in the OPL is determined to be 43.8%. Although, this result is lower than wood fibre (53%), OPL has higher hemicellulose content (36.4%) than the wood fibre (27.5%). In addition, the lignin content (19.7%) of OPL is in the low range of those in wood resources (18 - 25%). These parameters are important components to produce good quality pulp and will provide high mechanical strength of the paper-based products. The measured fibre length of oil palm leaf (1.13 mm) is shorter than the wood fibre (1.90 mm). Meanwhile, the mechanical property of OPL showed lower indexes than wood resources, however, tear (1.80 mN.m2/g) and burst (0.95 kPa.m2/g) indexes of OPL are higher than other published and successful wood resources (Eucalyptus). Based on the analyses, the oil palm leaf is indeed a suitable alternative of raw material for pulp and paper-based industries

Nonlinearity and Noise Effects in Multi-level Signal Millimeter-Wave over Fiber Transmission using Single- and Dual-Wavelength Modulation

We transmit multilevel quadrature amplitude modulation (QAM) data-IEEE 802.16 schemes-at 20 MSps and an orthogonal frequency-division multiplexing (OFDM) 802.11 g signal (54 Mbps) with a 25 GHz millimeter-wave over fiber system, which employs a dual wavelength source, over 20 km of single mode fiber. Downlink data transmission is successfully demonstrated over both optical and wireless (up to 12 m) paths with good error vector magnitude. An analysis of two different schemes, in which data is applied to one (single) and both (dual) of the wavelengths of a dual wavelength source, is carried out. The system performance is analyzed through simulation and a good match with experimental results is obtained. The analysis investigates the impact of Mach-Zehnder modulator (MZM) and RF amplifier nonlinearity and various noise sources, such as laser relative intensity noise, amplified spontaneous emission, thermal, and shot noise. A comparison of single carrier QAM IEEE 802.16 and OFDM in terms of their sensitivity to the distortions from MZM and RF amplifier nonlinearity is also presented