5 research outputs found

    Integrated circuits for wearable systems based on flexible electronics

    Get PDF

    Integrated circuits for wearable systems based on flexible electronics

    Get PDF

    Technological Integration in Printed Electronics

    Get PDF
    Conventional electronics requires the use of numerous deposition techniques (e.g. chemical vapor deposition, physical vapor deposition, and photolithography) with demanding conditions like ultra-high vacuum, elevated temperature and clean room facilities. In the last decades, printed electronics (PE) has proved the use of standard printing techniques to develop electronic devices with new features such as, large area fabrication, mechanical flexibility, environmental friendliness and—potentially—cost effectiveness. This kind of devices is especially interesting for the popular concept of the Internet of Things (IoT), in which the number of employed electronic devices increases massively. Because of this trend, the cost and environmental impact are gradually becoming a substantial issue. One of the main technological barriers to overcome for PE to be a real competitor in this context, however, is the integration of these non-conventional techniques between each other and the embedding of these devices in standard electronics. This chapter summarizes the advances made in this direction, focusing on the use of different techniques in one process flow and the integration of printed electronics with conventional systems

    Modulating Thin Film Transistor Characteristics by Texturing the Gate Metal.

    Get PDF
    The development of reliable, high performance integrated circuits based on thin film transistors (TFTs) is of interest for the development of flexible electronic circuits. In this work we illustrate the modulation of TFT transconductance via the texturing of the gate metal created by the addition of a conductive pattern on top of a planar gate. Texturing results in the semiconductor-insulator interface acquiring a non-planar geometry with local variations in the radius of curvature. This influences various TFT parameters such as the subthreshold slope, gate voltage at the onset of conduction, contact resistance and gate capacitance. Specific studies are performed on textures based on periodic striations oriented along different directions. Textured TFTs showed upto ±40% variation in transconductance depending on the texture orientation as compared to conventional planar gate TFTs. Analytical models are developed and compared with experiments. Gain boosting in common source amplifiers based on textured TFTs as compared to conventional TFTs is demonstrated

    Analogue Frontend Amplifiers for Bio-Potential Measurements Manufactured With a-IGZO TFTs on Flexible Substrate

    Get PDF
    Three novel differential amplifier topologies using double gate a-IGZO TFTs on flexible substrate are presented in this paper. The designs exploit positive feedback and a load with self-biased top gate to achieve the highest static gain in single stage a-IGZO amplifiers reported to date. After fabrication, the three amplifiers exhibit respectively a static gain of 14 dB, 21.5 dB and 30 dB, with a bandwidth of 2 kHz, 400 Hz, and 150 Hz. Also, for each circuit the input referred noise has been measured to be 420 μVrms, 195 μVrms and 146 μVrms, respectively. Based on these results, the a-IGZO amplifier providing the highest gain is suitable as front-end for heart rate measurements and, with some further optimization verified in simulation, can also be used for other bio-potential applications, like electro hysterogram and electro cardiogram
    corecore