An ultrasonic flowmeter for measuring dynamic liquid flow

A novel oscillating pipe system was developed to provide dynamic calibration wherein small sinusoidal signals with amplitudes of 0.5 to 10% of the steady-state flow were added to the steady-state flow by oscillating the flowmeter relative to the fixed pipes in the flow system. Excellent agreement was obtained between the dynamic velocities derived from an accelerometer mounted on the oscillating pipe system and those sensed by the flowmeter at frequencies of 7, 19, and 30 Hz. Also described were the signal processing techniques used to retrieve the small sinusoidal signals which were obscured by the fluid turbulence

Introduction to modern instrumentation: for hydraulics and environmental sciences

Preface Natural hazards and anthropic activities threaten the quality of the environment surrounding the human being, risking life and health. Among the different actions that must be taken to control the quality of the environment, the gathering of field data is a basic one. In order to obtain the needed data for environmental research, a great variety of new instruments based on electronics is used by professionals and researchers. Sometimes, the potentials and limitations of this new instrumentation remain somewhat unknown to the possible users. In order to better utilize modern instruments it is very important to understand how they work, avoiding misinterpretation of results. All instrument operators must gain proper insight into the working principles of their tools, because this internal view permits them to judge whether the instrument is appropriately selected and adequately functioning. Frequently, manufacturers have a tendency to show the great performances of their products without advising their customers that some characteristics are mutually exclusive. Car manufacturers usually show the maximum velocity that a model can reach and also the minimum fuel consumption. It is obvious for the buyer that both performances are mutually exclusive, but it is not so clear for buyers of measuring instruments. This book attempts to make clear some performances that are not easy to understand to those uninitiated in the utilization of electronic instruments. Technological changes that have occurred in the last few decades are not yet reflected in academic literature and courses; this material is the result of a course prepared with the purpose of reducing this shortage. The content of this book is intended for students of hydrology, hydraulics, oceanography, meteorology and environmental sciences. Most of the new instruments presented in the book are based on electronics, special physics principles and signal processing; therefore, basic concepts on these subjects are introduced in the first chapters (Chapters 1 to 3) with the hope that they serve as a complete, yet easy-to-digest beginning. Because of this review of concepts it is not necessary that the reader have previous information on electronics, electricity or particular physical principles to understand the topics developed later. Those readers with a solid understanding of these subjects could skip these chapters; however they are included because some students could find them as a useful synthesis. Chapter 4 is completely dedicated to the description of transducers and sensors frequently used in environmental sciences. It is described how electrical devices are modified by external parameters in order to become sensors. Also an introduction to oscillators is presented because they are used in most instruments. In the next chapters all the information presented here is recurrently referred to as needed to explain operating principles of instruments. Unauthenticated Download Date | 10/12/14 9:29 PM VIII Preface Chapters 1 to 4 are bitter pills that could discourage readers interested in the description of specific instruments. Perhaps, those readers trying this book from the beginning could abandon it before arriving at the most interesting chapters. Therefore, they could read directly Chapters 5 to 11, going back as they feel that they need the knowledge of the previous chapters. We intended to make clear all the references to the previous subjects needed to understand each one of the issues developed in the later chapters. Chapter 5 contributes to the understanding of modern instrumentation to measure flow in industrial and field conditions. Traditional mechanical meters are avoided to focus the attention on electronic ones, such as vortex, electromagnetic, acoustic, thermal, and Coriolis flowmeters. Special attention is dedicated to acoustic Doppler current profilers and acoustic Doppler velocimeters. Chapter 6 deals with two great subjects; the first is devoted to instruments for measuring dynamic and quasi static levels in liquids, mainly water. Methods to measure waves at sea and in the laboratory are explained, as well as instruments to measure slow changes such as tides or piezometric heads for hydrologic applications. The second subject includes groundwater measurement methods with emphasis on very low velocity flowmeters which measure velocity from inside a single borehole. Most of them are relatively new methods and some are based on operating principles described in the previous chapter. Seepage meters used to measure submarine groundwater discharge are also presented. Chapter 7 presents methods and instruments for measuring rain, wind and solar radiation. Even though the attention is centered on new methods, some traditional methods are described not only because they are still in use, and it is not yet clear if the new technologies will definitely replace them, but also because describing them permits their limitations and drawbacks to be better understood. Methods to measure solar radiation are described from radiation detectors to complete instruments for total radiation and radiation spectrum measurements. Chapter 8 is a long chapter where we have tried to include most remote measuring systems useful for environmental studies. It begins with a technique called DTS (Distributed Temperature Sensing) that has the particularity of being remote, but where the electromagnetic wave propagates inside a fibre optic. The chapter follows with atmosphere wind profilers using acoustic and electromagnetic waves. Radio acoustic sounding systems used to get atmospheric temperature profiles are explained in detail as well as weather radar. Methods for ocean surface currents monitoring are also introduced. The chapter ends with ground penetrating radars. Chapter 9 is an introduction to digital transmission and storage of information. This subject has been reduced to applications where information collected by field instruments has to be conveyed to a central station where it is processed and stored. Some insight into networks of instruments is developed; we think this information will help readers to select which method to use to transport information from field to office, by means of such diverse communication media as fibre optic, digital telephony, Unauthenticated Download Date | 10/12/14 9:29 PM Preface IX GSM (Global System for Mobile communications), satellite communications and private radio frequency links. Chapter 10 is devoted to satellite-based remote sensing. Introductory concepts such as image resolution and instrument?s scanning geometry are developed before describing how passive instruments estimate some meteorological parameters. Active instruments are presented in general, but the on-board data processing is emphasized due to its importance in the quality of the measurements. Hence, concepts like Synthetic Aperture Radar (SAR) and Chirp Radar are developed in detail. Scatterometers, altimeters and Lidar are described as applications of the on-board instruments to environmental sciences. Chapter 11 attempts to transfer some experiences in field measuring to the readers. A pair of case studies is included to encourage students to perform tests on the instruments before using them. In this chapter we try to condense our ideas, most of them already expressed throughout the book, about the attitude a researcher should have with modern instruments before and after a measuring field work. As can be inferred from the foregoing description the book aims to provide students with the necessary tools to adequately select and use instruments for environmental monitoring. Several examples are introduced to advise future professionals and researchers on how to measure properly, so as to make sure that the data recorded by the instruments actually represents the parameters they intend to know. With this purpose, instruments are explained in detail so that their measuring limitations are recognized. Within the entire work it is underlined how spatial and temporal scales, inherent to the instruments, condition the collection of data. Informal language and qualitative explanations are used, but enough mathematical fundamentals are given to allow the reader to reach a good quantitative knowledge. It is clear from the title of the book that it is a basic tool to introduce students to modern instrumentation; it is not intended for formed researchers with specific interests. However, general ideas on some measuring methods and on data acquisition concepts could be useful to them before buying an instrument or selecting a measuring method. Those readers interested in applying some particular method or instrument described in this book should consider these explanations just as an introduction to the subject; they will need to dig deeper in the specific bibliography before putting hands on.Fil: Guaraglia, Dardo Oscar. Universidad Nacional de la Plata. Facultad de Ingeniería. Departamento de Hidraulica. Area Hidraulica Basica; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; ArgentinaFil: Pousa, Jorge Lorenzo. Universidad Nacional de La Plata. Facultad de Ciencias Naturales y Museo. Laboratorio de Oceanografía Costera y Estuarios; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata; Argentin

Handbook of recommended practices for the determination of liquid monopropellant rocket engine performance

The design, installation, and operation of systems to be used for directly measuring quantities of fundamental importance to the determination of monopropellant thruster performance is described. Areas covered include: (1) force and impulse measurement; (2) propellant mass usage and flow measurement; (3) pressure measurement; (4) temperature measurement; (5) exhaust gas composition measurement; and (6) data reduction and performance determination

NASA Tech Briefs Index, 1977, volume 2, numbers 1-4

Announcements of new technology derived from the research and development activities of NASA are presented. Abstracts, and indexes for subject, personal author, originating center, and Tech Brief number are presented for 1977

High Accuracy Fuel Flowmeter, Phase 1

Technology related to aircraft fuel mass - flowmeters was reviewed to determine what flowmeter types could provide 0.25%-of-point accuracy over a 50 to one range in flowrates. Three types were selected and were further analyzed to determine what problem areas prevented them from meeting the high accuracy requirement, and what the further development needs were for each. A dual-turbine volumetric flowmeter with densi-viscometer and microprocessor compensation was selected for its relative simplicity and fast response time. An angular momentum type with a motor-driven, spring-restrained turbine and viscosity shroud was selected for its direct mass-flow output. This concept also employed a turbine for fast response and a microcomputer for accurate viscosity compensation. The third concept employed a vortex precession volumetric flowmeter and was selected for its unobtrusive design. Like the turbine flowmeter, it uses a densi-viscometer and microprocessor for density correction and accurate viscosity compensation

Evaluation of Ultrasonic Transducers for Use with Fire Apparatus

Fire departments are tasked with the protection of life and property in dangerous situations. Currently, water consumption for fire response is typically an estimate or a guess by the pump operator.;This thesis evaluates the use and applicability of an ultrasonic Time-of-Flight flowmeter on the discharge of a fire apparatus pump. The tests showed that the Time-of-Flight flowmeter was accurate within ten percent as long as it was at least twenty-five feet from the discharge of the pump. Pump vibration noise seems to prevent accurate use near the pump itself

Coriolis flowmeters: A review of developments over the past 20 years, and an assessment of the state of the art and likely future directions

This paper starts from a brief revisit of key early published work so that an overview of modern Coriolis flowmeters can be provided based on a historical background. The paper, then, focuses on providing an updated review of Coriolis flow measurement technology over the past 20 years. Published research work and industrial Coriolis flowmeter design are both reviewed in details. It is the intention of this paper to provide a comprehensive review study of all important topics in the subject, which include interesting theoretical and experimental studies and innovative industrial developments and applications. The advances in fundamental understanding and technology development are clearly identified. Future directions in various areas together with some open questions are also outlined.This is the accepted manuscript version. The final version is available from Elsevier at http://dx.doi.org/10.1016/j.flowmeasinst.2014.08.01

Experimental investigation of reactor-loop transients during startup of a simulated SNAP-8 system

Primary loop transients during startup of Rankine cycle space power system in SNAP 8 simulato

Sensors and Transducers

book chapterBiomedical Informatic