8,943 research outputs found

    Examples of works to practice staccato technique in clarinet instrument

    Get PDF
    Klarnetin staccato tekniğini güçlendirme aşamaları eser çalışmalarıyla uygulanmıştır. Staccato geçişlerini hızlandıracak ritim ve nüans çalışmalarına yer verilmiştir. Çalışmanın en önemli amacı sadece staccato çalışması değil parmak-dilin eş zamanlı uyumunun hassasiyeti üzerinde de durulmasıdır. Staccato çalışmalarını daha verimli hale getirmek için eser çalışmasının içinde etüt çalışmasına da yer verilmiştir. Çalışmaların üzerinde titizlikle durulması staccato çalışmasının ilham verici etkisi ile müzikal kimliğe yeni bir boyut kazandırmıştır. Sekiz özgün eser çalışmasının her aşaması anlatılmıştır. Her aşamanın bir sonraki performans ve tekniği güçlendirmesi esas alınmıştır. Bu çalışmada staccato tekniğinin hangi alanlarda kullanıldığı, nasıl sonuçlar elde edildiği bilgisine yer verilmiştir. Notaların parmak ve dil uyumu ile nasıl şekilleneceği ve nasıl bir çalışma disiplini içinde gerçekleşeceği planlanmıştır. Kamış-nota-diyafram-parmak-dil-nüans ve disiplin kavramlarının staccato tekniğinde ayrılmaz bir bütün olduğu saptanmıştır. Araştırmada literatür taraması yapılarak staccato ile ilgili çalışmalar taranmıştır. Tarama sonucunda klarnet tekniğin de kullanılan staccato eser çalışmasının az olduğu tespit edilmiştir. Metot taramasında da etüt çalışmasının daha çok olduğu saptanmıştır. Böylelikle klarnetin staccato tekniğini hızlandırma ve güçlendirme çalışmaları sunulmuştur. Staccato etüt çalışmaları yapılırken, araya eser çalışmasının girmesi beyni rahatlattığı ve istekliliği daha arttırdığı gözlemlenmiştir. Staccato çalışmasını yaparken doğru bir kamış seçimi üzerinde de durulmuştur. Staccato tekniğini doğru çalışmak için doğru bir kamışın dil hızını arttırdığı saptanmıştır. Doğru bir kamış seçimi kamıştan rahat ses çıkmasına bağlıdır. Kamış, dil atma gücünü vermiyorsa daha doğru bir kamış seçiminin yapılması gerekliliği vurgulanmıştır. Staccato çalışmalarında baştan sona bir eseri yorumlamak zor olabilir. Bu açıdan çalışma, verilen müzikal nüanslara uymanın, dil atış performansını rahatlattığını ortaya koymuştur. Gelecek nesillere edinilen bilgi ve birikimlerin aktarılması ve geliştirici olması teşvik edilmiştir. Çıkacak eserlerin nasıl çözüleceği, staccato tekniğinin nasıl üstesinden gelinebileceği anlatılmıştır. Staccato tekniğinin daha kısa sürede çözüme kavuşturulması amaç edinilmiştir. Parmakların yerlerini öğrettiğimiz kadar belleğimize de çalışmaların kaydedilmesi önemlidir. Gösterilen azmin ve sabrın sonucu olarak ortaya çıkan yapıt başarıyı daha da yukarı seviyelere çıkaracaktır

    A direct-laser-written heart-on-a-chip platform for generation and stimulation of engineered heart tissues

    Full text link
    In this dissertation, we first develop a versatile microfluidic heart-on-a-chip model to generate 3D-engineered human cardiac microtissues in highly-controlled microenvironments. The platform, which is enabled by direct laser writing (DLW), has tailor-made attachment sites for cardiac microtissues and comes with integrated strain actuators and force sensors. Application of external pressure waves to the platform results in controllable time-dependent forces on the microtissues. Conversely, oscillatory forces generated by the microtissues are transduced into measurable electrical outputs. After characterization of the responsivity of the transducers, we demonstrate the capabilities of this platform by studying the response of cardiac microtissues to prescribed mechanical loading and pacing. Next, we tune the geometry and mechanical properties of the platform to enable parametric studies on engineered heart tissues. We explore two geometries: a rectangular seeding well with two attachment sites, and a stadium-like seeding well with six attachment sites. The attachment sites are placed symmetrically in the longitudinal direction. The former geometry promotes uniaxial contraction of the tissues; the latter additionally induces diagonal fiber alignment. We systematically increase the length for both configurations and observe a positive correlation between fiber alignment at the center of the microtissues and tissue length. However, progressive thinning and “necking” is also observed, leading to the failure of longer tissues over time. We use the DLW technique to improve the platform, softening the mechanical environment and optimizing the attachment sites for generation of stable microtissues at each length and geometry. Furthermore, electrical pacing is incorporated into the platform to evaluate the functional dynamics of stable microtissues over the entire range of physiological heart rates. Here, we typically observe a decrease in active force and contraction duration as a function of frequency. Lastly, we use a more traditional ?TUG platform to demonstrate the effects of subthreshold electrical pacing on the rhythm of the spontaneously contracting cardiac microtissues. Here, we observe periodic M:N patterns, in which there are ? cycles of stimulation for every ? tissue contractions. Using electric field amplitude, pacing frequency, and homeostatic beating frequencies of the tissues, we provide an empirical map for predicting the emergence of these rhythms

    Targeting Fusion Proteins of HIV-1 and SARS-CoV-2

    Get PDF
    Viruses are disease-causing pathogenic agents that require host cells to replicate. Fusion of host and viral membranes is critical for the lifecycle of enveloped viruses. Studying viral fusion proteins can allow us to better understand how they shape immune responses and inform the design of therapeutics such as drugs, monoclonal antibodies, and vaccines. This thesis discusses two approaches to targeting two fusion proteins: Env from HIV-1 and S from SARS-CoV-2. The first chapter of this thesis is an introduction to viruses with a specific focus on HIV-1 CD4 mimetic drugs and antibodies against SARS-CoV-2. It discusses the architecture of these viruses and fusion proteins and how small molecules, peptides, and antibodies can target these proteins successfully to treat and prevent disease. In addition, a brief overview is included of the techniques involved in structural biology and how it has informed the study of viruses. For the interested reader, chapter 2 contains a review article that serves as a more in-depth introduction for both viruses as well as how the use of structural biology has informed the study of viral surface proteins and neutralizing antibody responses to them. The subsequent chapters provide a body of work divided into two parts. The first part in chapter 3 involves a study on conformational changes induced in the HIV-1 Env protein by CD4-mimemtic drugs using single particle cryo-EM. The second part encompassing chapters 4 and 5 includes two studies on antibodies isolated from convalescent COVID-19 donors. The former involves classification of antibody responses to the SARS-CoV-2 S receptor-binding domain (RBD). The latter discusses an anti-RBD antibody class that binds to a conserved epitope on the RBD and shows cross-binding and cross-neutralization to other coronaviruses in the sarbecovirus subgenus.</p

    Cost-effective non-destructive testing of biomedical components fabricated using additive manufacturing

    Get PDF
    Biocompatible titanium-alloys can be used to fabricate patient-specific medical components using additive manufacturing (AM). These novel components have the potential to improve clinical outcomes in various medical scenarios. However, AM introduces stability and repeatability concerns, which are potential roadblocks for its widespread use in the medical sector. Micro-CT imaging for non-destructive testing (NDT) is an effective solution for post-manufacturing quality control of these components. Unfortunately, current micro-CT NDT scanners require expensive infrastructure and hardware, which translates into prohibitively expensive routine NDT. Furthermore, the limited dynamic-range of these scanners can cause severe image artifacts that may compromise the diagnostic value of the non-destructive test. Finally, the cone-beam geometry of these scanners makes them susceptible to the adverse effects of scattered radiation, which is another source of artifacts in micro-CT imaging. In this work, we describe the design, fabrication, and implementation of a dedicated, cost-effective micro-CT scanner for NDT of AM-fabricated biomedical components. Our scanner reduces the limitations of costly image-based NDT by optimizing the scanner\u27s geometry and the image acquisition hardware (i.e., X-ray source and detector). Additionally, we describe two novel techniques to reduce image artifacts caused by photon-starvation and scatter radiation in cone-beam micro-CT imaging. Our cost-effective scanner was designed to match the image requirements of medium-size titanium-alloy medical components. We optimized the image acquisition hardware by using an 80 kVp low-cost portable X-ray unit and developing a low-cost lens-coupled X-ray detector. Image artifacts caused by photon-starvation were reduced by implementing dual-exposure high-dynamic-range radiography. For scatter mitigation, we describe the design, manufacturing, and testing of a large-area, highly-focused, two-dimensional, anti-scatter grid. Our results demonstrate that cost-effective NDT using low-cost equipment is feasible for medium-sized, titanium-alloy, AM-fabricated medical components. Our proposed high-dynamic-range strategy improved by 37% the penetration capabilities of an 80 kVp micro-CT imaging system for a total x-ray path length of 19.8 mm. Finally, our novel anti-scatter grid provided a 65% improvement in CT number accuracy and a 48% improvement in low-contrast visualization. Our proposed cost-effective scanner and artifact reduction strategies have the potential to improve patient care by accelerating the widespread use of patient-specific, bio-compatible, AM-manufactured, medical components

    Full stack development toward a trapped ion logical qubit

    Get PDF
    Quantum error correction is a key step toward the construction of a large-scale quantum computer, by preventing small infidelities in quantum gates from accumulating over the course of an algorithm. Detecting and correcting errors is achieved by using multiple physical qubits to form a smaller number of robust logical qubits. The physical implementation of a logical qubit requires multiple qubits, on which high fidelity gates can be performed. The project aims to realize a logical qubit based on ions confined on a microfabricated surface trap. Each physical qubit will be a microwave dressed state qubit based on 171Yb+ ions. Gates are intended to be realized through RF and microwave radiation in combination with magnetic field gradients. The project vertically integrates software down to hardware compilation layers in order to deliver, in the near future, a fully functional small device demonstrator. This thesis presents novel results on multiple layers of a full stack quantum computer model. On the hardware level a robust quantum gate is studied and ion displacement over the X-junction geometry is demonstrated. The experimental organization is optimized through automation and compressed waveform data transmission. A new quantum assembly language purely dedicated to trapped ion quantum computers is introduced. The demonstrator is aimed at testing implementation of quantum error correction codes while preparing for larger scale iterations.Open Acces

    International Conference on Mathematical Analysis and Applications in Science and Engineering – Book of Extended Abstracts

    Get PDF
    The present volume on Mathematical Analysis and Applications in Science and Engineering - Book of Extended Abstracts of the ICMASC’2022 collects the extended abstracts of the talks presented at the International Conference on Mathematical Analysis and Applications in Science and Engineering – ICMA2SC'22 that took place at the beautiful city of Porto, Portugal, in June 27th-June 29th 2022 (3 days). Its aim was to bring together researchers in every discipline of applied mathematics, science, engineering, industry, and technology, to discuss the development of new mathematical models, theories, and applications that contribute to the advancement of scientific knowledge and practice. Authors proposed research in topics including partial and ordinary differential equations, integer and fractional order equations, linear algebra, numerical analysis, operations research, discrete mathematics, optimization, control, probability, computational mathematics, amongst others. The conference was designed to maximize the involvement of all participants and will present the state-of- the-art research and the latest achievements.info:eu-repo/semantics/publishedVersio

    A Verified Software Toolchain for Quantum Programming

    Get PDF
    Quantum computing is steadily moving from theory into practice, with small-scale quantum computers available for public use. Now quantum programmers are faced with a classical problem: How can they be sure that their code does what they intend it to do? I aim to show that techniques for classical program verification can be adapted to the quantum setting, allowing for the development of high-assurance quantum software, without sacrificing performance or programmability. In support of this thesis, I present several results in the application of formal methods to the domain of quantum programming, aiming to provide a high-assurance software toolchain for quantum programming. I begin by presenting SQIR, a small quantum intermediate representation deeply embedded in the Coq proof assistant, which has been used to implement and prove correct quantum algorithms such as Grover’s search and Shor’s factorization algorithm. Next, I present VOQC, a verified optimizer for quantum circuits that contains state-of-the-art SQIR program optimizations with performance on par with unverified tools. I additionally discuss VQO, a framework for specifying and verifying oracle programs, which can then be optimized with VOQC. Finally, I present exploratory work on providing high assurance for a high-level industry quantum programming language, Q#, in the F* proof assistant

    Strung pieces: on the aesthetics of television fiction series

    Get PDF
    As layered and long works, television fiction series have aesthetic properties that are built over time, bit by bit. This thesis develops a group of concepts that enable the study of these properties, It argues that a series is made of strung pieces, a system of related elements. The text begins by considering this sequential form within the fields of film and television. This opening chapter defines the object and methodology of research, arguing for a non-essentialist distinction between cinema and television and against the adequacy of textual and contextual analyses as approaches to the aesthetics of these shows. It proposes instead that these programmes should be described as televisual works that can be scrutinised through aesthetic analysis. The next chapters propose a sequence of interrelated concepts. The second chapter contends that series are composed of building blocks that can be either units into which series are divided or motifs that unify series and are dispersed across their pans. These blocks are patterned according to four kinds of relations or principles of composition. Repetition and variation are treated in tandem in the third chapter because of their close connection, given that variation emerges from established repetition. Exception and progression are also discussed together in the fourth chapter since they both require a long view of these serial works. The former, in order to be recognised as a deviation from the patterns of repetition and variation. The latter, In order to be understood in Its many dimensions as the series advances. Each of these concepts is further detailed with additional distinctions between types of units, motifs, repetitions, variations, and exceptions, using illustrative examples from numerous shows. In contrast, the section on progression uses a single series as case study, Carnivàle (2003-05), because this is the overarching principle that encompasses all the others. The conclusion considers the findings of the research and suggests avenues for their application

    Side-emitting fibers: targeted light scattering in optical fibers

    Get PDF
    Light scattering in optical fibers can transform the fiber into a linear light source with customizable emission properties: a side-emitting fiber. Side-emitting fibers are light sources with special angular and longitudinal emission characteristics, not generally encountered in other light sources: they emit radiation in all directions like a diffuse light source, but the emission is preferentially directed forward. Also, the fiber’s surface emission may decrease exponentially or vary along the fiber. The contribution of this dissertation to the literature on side-emitting fibers is twofold; first, it will show how these fiber emission parameters will influence the generated light field in the proximity and the far field. Second, it will show how to customize the emission properties by using femtosecond laser-generated scattering centers: Arranging these building blocks can generate customized longitudinal emission profiles. Furthermore, it will derive an electromagnetic model of the scattering behavior of these modifications to show how their stochastic properties, shape, and volume affect the angular emission profile and their scattering power
    corecore