Optimal analog wavelet bases construction using hybrid optimization algorithm

An approach for the construction of optimal analog wavelet bases is presented. First, the definition of an analog wavelet is given. Based on the definition and the least-squares error criterion, a general framework for designing optimal analog wavelet bases is established, which is one of difficult nonlinear constrained optimization problems. Then, to solve this problem, a hybrid algorithm by combining chaotic map particle swarm optimization (CPSO) with local sequential quadratic programming (SQP) is proposed. CPSO is an improved PSO in which the saw tooth chaotic map is used to raise its global search ability. CPSO is a global optimizer to search the estimates of the global solution, while the SQP is employed for the local search and refining the estimates. Benefiting from good global search ability of CPSO and powerful local search ability of SQP, a high-precision global optimum in this problem can be gained. Finally, a series of optimal analog wavelet bases are constructed using the hybrid algorithm. The proposed method is tested for various wavelet bases and the improved performance is compared with previous works.Peer reviewedFinal Published versio

Communication channel analysis and real time compressed sensing for high density neural recording devices

Next generation neural recording and Brain- Machine Interface (BMI) devices call for high density or distributed systems with more than 1000 recording sites. As the recording site density grows, the device generates data on the scale of several hundred megabits per second (Mbps). Transmitting such large amounts of data induces significant power consumption and heat dissipation for the implanted electronics. Facing these constraints, efficient on-chip compression techniques become essential to the reduction of implanted systems power consumption. This paper analyzes the communication channel constraints for high density neural recording devices. This paper then quantifies the improvement on communication channel using efficient on-chip compression methods. Finally, This paper describes a Compressed Sensing (CS) based system that can reduce the data rate by > 10x times while using power on the order of a few hundred nW per recording channel

An Architecture for On board Frequency Domain Analysis of Launch Vehicle Vibration Signals

The dynamic properties of the airborne structures plays a crucial role in the stability of the vehicle during flight. Modal and spectral behaviour of the structures are simulated and analysed. Ground tests are carried out with environmental conditions close to the flight conditions, with some assumptions. Subsequently, based on the flight telemetered data, the on-board mission algorithm and the auto-pilot filter coefficients are fine tuned. An attempt is made in this paper to design a novel architecture for analysing the modal and spectral random vibration signals on-board the flight vehicle and to identify the dominant frequencies. Based on the analysed results, the mission mode algorithm and the filter coefficients can be fine tuned on-board for better effectiveness in control and providing more stability. Three types of windows viz. Hann, Hamming and Blackman-Harris are configured with a generalised equation using FIR filter structure. The overlapping of the input signal data for better inclusiveness of the real-time data is implemented with BRAM. The domain conversion of the data from time domain to frequency domain is carried out with FFT using Radix-2 BF architecture. The FFT output data are processed for calculating the power spectral density. The dominant frequency is identified using the array search method and Goldschmidt algorithm is utilised for the averaging of the PSDs for better precision. The proposed architecture is synthesised, implemented and tested with both Synthetic and doppler signal of 300 Hz spot frequency padded with Gaussian white noise. The results are highly satisfactory in identifying the spot frequency and generating the PSD array

Top-down design of digital signal processing systems

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1996.Includes bibliographical references (leaves 45-46).by Amy M. Singer.M.Eng

General rational approximation of Gaussian wavelet series and continuous-time gm-C filter implementation

© 2020 John Wiley & Sons, Ltd. This is the accepted version of the following article: Li, M, Sun, Y. General rational approximation of Gaussian wavelet series and continuous‐time g m ‐C filter implementation. Int J Circ Theor Appl. 2020; 1– 17., which has been published in final form at https://doi.org/10.1002/cta.2834.A general method of rational approximation for Gaussian wavelet series and Gaussian wavelet filter circuit design with simple gm-C integrators is presented in this work. Firstly, the multi-order derivatives of Gaussian function are analysed and proved as wavelet base functions. Then a high accuracy general approximation model of Gaussian wavelet series is constructed and the transfer function of first order derivative of Gaussian wavelet filter is obtained using quantum differential evolution (QDE) algorithm. Thirdly, as an example, a 5th order continuous-time analogue first order derivative of Gaussian wavelet filter circuit is designed based on multiple loop feedback structure with simple gm-C integrator as the basic blocks. Finally, simulation results demonstrate the proposed method is an excellent way for the wavelet transform implementation. The designed first order derivative of Gaussian wavelet filter circuit operates from a 0.53V supply voltage and a bias current 2.5nA. The power dissipation of the wavelet filter circuit at the basic scale is 41.1nW. Moreover, the high accuracy QRS detection based on the designed wavelet filter has been validated in application analysis.Peer reviewe

Developing large-scale field-programmable analog arrays for rapid prototyping

Field-programmable analog arrays (FPAAs) provide a method for rapidly prototyping analog systems. While currently available FPAAs vary in architecture and interconnect design, they are often limited in size and flexibility. For FPAAs to be as useful and marketable as modern digital reconfigurable devices, new technologies must be explored to provide area efficient, accurately programmable analog circuitry that can be easily integrated into a larger digital/mixed signal system. By leveraging recent advances in floating gate transistors, a new generation of FPAAs are achievable that will dramatically advance the current state of the art in terms of size, functionality, and flexibility

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design