704 research outputs found
High Order Cell-Centered Lagrangian-Type Finite Volume Schemes with Time-Accurate Local Time Stepping on Unstructured Triangular Meshes
We present a novel cell-centered direct Arbitrary-Lagrangian-Eulerian (ALE)
finite volume scheme on unstructured triangular meshes that is high order
accurate in space and time and that also allows for time-accurate local time
stepping (LTS). The new scheme uses the following basic ingredients: a high
order WENO reconstruction in space on unstructured meshes, an element-local
high-order accurate space-time Galerkin predictor that performs the time
evolution of the reconstructed polynomials within each element, the computation
of numerical ALE fluxes at the moving element interfaces through approximate
Riemann solvers, and a one-step finite volume scheme for the time update which
is directly based on the integral form of the conservation equations in
space-time. The inclusion of the LTS algorithm requires a number of crucial
extensions, such as a proper scheduling criterion for the time update of each
element and for each node; a virtual projection of the elements contained in
the reconstruction stencils of the element that has to perform the WENO
reconstruction; and the proper computation of the fluxes through the space-time
boundary surfaces that will inevitably contain hanging nodes in time due to the
LTS algorithm. We have validated our new unstructured Lagrangian LTS approach
over a wide sample of test cases solving the Euler equations of compressible
gasdynamics in two space dimensions, including shock tube problems, cylindrical
explosion problems, as well as specific tests typically adopted in Lagrangian
calculations, such as the Kidder and the Saltzman problem. When compared to the
traditional global time stepping (GTS) method, the newly proposed LTS algorithm
allows to reduce the number of element updates in a given simulation by a
factor that may depend on the complexity of the dynamics, but which can be as
large as 4.7.Comment: 31 pages, 13 figure
Theoretical and numerical comparison of hyperelastic and hypoelastic formulations for Eulerian non-linear elastoplasticity
The aim of this paper is to compare a hyperelastic with a hypoelastic model
describing the Eulerian dynamics of solids in the context of non-linear
elastoplastic deformations. Specifically, we consider the well-known
hypoelastic Wilkins model, which is compared against a hyperelastic model based
on the work of Godunov and Romenski. First, we discuss some general conceptual
differences between the two approaches. Second, a detailed study of both models
is proposed, where differences are made evident at the aid of deriving a
hypoelastic-type model corresponding to the hyperelastic model and a particular
equation of state used in this paper. Third, using the same high order ADER
Finite Volume and Discontinuous Galerkin methods on fixed and moving
unstructured meshes for both models, a wide range of numerical benchmark test
problems has been solved. The numerical solutions obtained for the two
different models are directly compared with each other. For small elastic
deformations, the two models produce very similar solutions that are close to
each other. However, if large elastic or elastoplastic deformations occur, the
solutions present larger differences.Comment: 14 figure
Positivity-preserving cell-centered Lagrangian schemes for multi-material compressible flows: From first-order to high-orders. Part I: The one-dimensional case
International audienceOne of the main issues in the field of numerical schemes is to ally robustness with accuracy. Considering gas dynamics, numerical approximations may generate negative density or pressure, which may lead to nonlinear instability and crash of the code. This phenomenon is even more critical using a Lagrangian formalism, the grid moving and being deformed during the calculation. Furthermore, most of the problems studied in this framework contain very intense rarefaction and shock waves. In this paper, the admissibility of numerical solutions obtained by high-order finite-volume-scheme-based methods, such as the discontinuous Galerkin (DG) method, the essentially non-oscillatory (ENO) and the weighted ENO (WENO) finite volume schemes, is addressed in the one-dimensional Lagrangian gas dynamics framework. After briefly recalling how to derive Lagrangian forms of the 1D gas dynamics system of equations, a discussion on positivity-preserving approximate Riemann solvers, ensuring first-order finite volume schemes to be positive, is then given. This study is conducted for both ideal gas and non ideal gas equations of state (EOS), such as the Jones-Wilkins-Lee (JWL) EOS or the Mie-GrĂĽneisen (MG) EOS, and relies on two different techniques: either a particular definition of the local approximation of the acoustic impedances arising from the approximate Riemann solver, or an additional time step constraint relative to the cell volume variation. Then, making use of the work presented in [89, 90, 22], this positivity study is extended to high-orders of accuracy, where new time step constraints are obtained, and proper limitation is required. Through this new procedure, scheme robustness is highly improved and hence new problems can be tackled. Numerical results are provided to demonstrate the effectiveness of these methods. This paper is the first part of a series of two. The whole analysis presented here is extended to the two-dimensional case in [85], and proves to fit a wide range of numerical schemes in the literature, such as those presented in [19, 64, 15, 82, 84]
High order direct Arbitrary-Lagrangian-Eulerian schemes on moving Voronoi meshes with topology changes
We present a new family of very high order accurate direct
Arbitrary-Lagrangian-Eulerian (ALE) Finite Volume (FV) and Discontinuous
Galerkin (DG) schemes for the solution of nonlinear hyperbolic PDE systems on
moving 2D Voronoi meshes that are regenerated at each time step and which
explicitly allow topology changes in time.
The Voronoi tessellations are obtained from a set of generator points that
move with the local fluid velocity. We employ an AREPO-type approach, which
rapidly rebuilds a new high quality mesh rearranging the element shapes and
neighbors in order to guarantee a robust mesh evolution even for vortex flows
and very long simulation times. The old and new Voronoi elements associated to
the same generator are connected to construct closed space--time control
volumes, whose bottom and top faces may be polygons with a different number of
sides. We also incorporate degenerate space--time sliver elements, needed to
fill the space--time holes that arise because of topology changes. The final
ALE FV-DG scheme is obtained by a redesign of the fully discrete direct ALE
schemes of Boscheri and Dumbser, extended here to moving Voronoi meshes and
space--time sliver elements. Our new numerical scheme is based on the
integration over arbitrary shaped closed space--time control volumes combined
with a fully-discrete space--time conservation formulation of the governing PDE
system. In this way the discrete solution is conservative and satisfies the GCL
by construction.
Numerical convergence studies as well as a large set of benchmarks for
hydrodynamics and magnetohydrodynamics (MHD) demonstrate the accuracy and
robustness of the proposed method. Our numerical results clearly show that the
new combination of very high order schemes with regenerated meshes with
topology changes lead to substantial improvements compared to direct ALE
methods on conforming meshes
- …