LabVIEW interface with Tango control system for a multi-technique X-ray spectrometry IAEA beamline end-station at Elettra Sincrotrone Trieste

A new synchrotron beamline end-station for multipurpose X-ray spectrometry applications has been recently commissioned and it is currently accessible by end-users at the XRF beamline of Elettra Sincrotrone Trieste. The end-station consists of an ultra-high vacuum chamber that includes as main instrument a seven-axis motorized manipulator for sample and detectors positioning, different kinds of X-ray detectors and optical cameras. The beamline end-station allows performing measurements in different X-ray spectrometry techniques such as Microscopic X-Ray Fluorescence analysis (µXRF), Total Reflection X-Ray Fluorescence analysis (TXRF), Grazing Incidence/Exit X-Ray Fluorescence analysis (GI-XRF/GE-XRF), X-Ray Reflectometry (XRR), and X-Ray Absorption Spectroscopy (XAS). A LabVIEW Graphical User Interface (GUI) bound with Tango control system consisted of many custom made software modules is utilized as a user-friendly tool for control of the entire end-station hardware components. The present work describes this advanced Tango and LabVIEW software platform that utilizes in an optimal synergistic manner the merits and functionality of these well-established programming and equipment control tools

Design of an Anthropomorphic, Compliant, and Lightweight Dual Arm for Aerial Manipulation

This paper presents an anthropomorphic, compliant and lightweight dual arm manipulator designed and developed for aerial manipulation applications with multi-rotor platforms. Each arm provides four degrees of freedom in a human-like kinematic configuration for end effector positioning: shoulder pitch, roll and yaw, and elbow pitch. The dual arm, weighting 1.3 kg in total, employs smart servo actuators and a customized and carefully designed aluminum frame structure manufactured by laser cut. The proposed design reduces the manufacturing cost as no computer numerical control machined part is used. Mechanical joint compliance is provided in all the joints, introducing a compact spring-lever transmission mechanism between the servo shaft and the links, integrating a potentiometer for measuring the deflection of the joints. The servo actuators are partially or fully isolated against impacts and overloads thanks to the ange bearings attached to the frame structure that support the rotation of the links and the deflection of the joints. This simple mechanism increases the robustness of the arms and safety in the physical interactions between the aerial robot and the environment. The developed manipulator has been validated through different experiments in fixed base test-bench and in outdoor flight tests.Unión Europea H2020-ICT-2014- 644271Ministerio de Economía y Competitividad DPI2015-71524-RMinisterio de Economía y Competitividad DPI2017-89790-

Overcoming barriers and increasing independence: service robots for elderly and disabled people

This paper discusses the potential for service robots to overcome barriers and increase independence of elderly and disabled people. It includes a brief overview of the existing uses of service robots by disabled and elderly people and advances in technology which will make new uses possible and provides suggestions for some of these new applications. The paper also considers the design and other conditions to be met for user acceptance. It also discusses the complementarity of assistive service robots and personal assistance and considers the types of applications and users for which service robots are and are not suitable

Technology for large space systems: A special bibliography with indexes (supplement 03)

A bibliography containing 217 abstracts addressing the technology for large space systems is presented. State of the art and advanced concepts concerning interactive analysis and design, structural concepts, control systems, electronics, advanced materials, assembly concepts, propulsion, solar power satellite systems, and flight experiments are represented

On Aerial Robots with Grasping and Perching Capabilities: A Comprehensive Review

Over the last decade, there has been an increased interest in developing aerial robotic platforms that exhibit grasping and perching capabilities not only within the research community but also in companies across different industry sectors. Aerial robots range from standard multicopter vehicles/drones, to autonomous helicopters, and fixed-wing or hybrid devices. Such devices rely on a range of different solutions for achieving grasping and perching. These solutions can be classified as: 1) simple gripper systems, 2) arm-gripper systems, 3) tethered gripping mechanisms, 4) reconfigurable robot frames, 5) adhesion solutions, and 6) embedment solutions. Grasping and perching are two crucial capabilities that allow aerial robots to interact with the environment and execute a plethora of complex tasks, facilitating new applications that range from autonomous package delivery and search and rescue to autonomous inspection of dangerous or remote environments. In this review paper, we present the state-of-the-art in aerial grasping and perching mechanisms and we provide a comprehensive comparison of their characteristics. Furthermore, we analyze these mechanisms by comparing the advantages and disadvantages of the proposed technologies and we summarize the significant achievements in these two research topics. Finally, we conclude the review by suggesting a series of potential future research directions that we believe that are promising

Thermal Robotic Arm Controlled Spraying via Robotic Arm and Vision System

The Tribology Surface Engineering industry is a worldwide multi billion euro industry with significant health and safety risks. The thermal spraying sector of this industry employs the technique of applying molten surface coating material to a substrate via a thermal spray process which is implemented either by manual spraying or pre-programmed robotic systems. The development of autonomous robotic systems for thermal spraying surface coating would significantly improve production and profitability over pre-programmed systems and improve health and safety over manual spraying. The aim of this research was to investigate and develop through software simulation, physical modelling and testing the development of robotic subsystems that are required to provide autonomous robotic control for the thermal spraying process. Computer based modelling programs were developed to investigate the control strategy identified for the thermal spaying process. The algorithms included fifth order polynomial trajectories and the complete dynamic model where gravitational, inertia, centrifugal and coriolis torques are considered. Tests provide detail of the load torques that must be driven by the robot electric actuator for various structural changes to the thermal spraying robot and for variations in trajectory boundary conditions during thermal spraying. The non-linear and coupled forward and inverse kinematic equations of a five axis articulated robot with continuous rotation joints were developed and tested via computer based modelling and miniature physical robot modelling. Both the computer based modelling and physical model confirmed the closed form kinematic solutions. A solution to running cables through the continuous rotation joints for power and data is present which uses polytetrafloraethylene (PTFE) electroless nickel. This material was identified during the literature review of surface coating materials. It has excellent wear, friction and conductivity properties. Physical tests on a slip ring and brushes test rig using electroless nickel are presented which confirm the viability of using PTFE electroless nickel as a slip ring. Measurement of the substrate during thermal spraying so as to autonomously control the thermal spaying robot is a significant challenge. This research presents solutions for the measurement of the substrate using a low cost camera system and lasers in a single wavelength environment. Tests were carried out which resulted in the removal of a butane flame obscuring a test piece requiring measurement from the camera image so that substrate measurements can be made using image processing and analysis techniques such as canny edge detection and centroid measurements. Test results for the low cost vision system provide depth measure errors of ±0.6 % and structural measurements such as area and perimeter in the range -5% to -7.5%. These results confirm the efficacy of this novel flame removal technique

A study of topological characteristics in pattern perception physiology in the mammalian cortex

Experimental procedures for studying topological characteristics in pattern perception physiology of rat cerebral corte

Safe cooperation between human operators and visually controlled industrial manipulators

Industrial tasks can be improved substantially by making humans and robots collaborate in the same workspace. The main goal of this chapter is the development of a human-robot interaction system which enables this collaboration and guarantees the safety of the human operator. This system is composed of two subsystems: the human tracking system and the robot control system. The human tracking system deals with the precise real-time localization of the human operator in the industrial environment. It is composed of two systems: an inertial motion capture system and an Ultra-WideBand localization system. The robot control system is based on visual servoing. A safety behaviour which stops the normal path tracking of the robot is performed when the robot and the human are too close. This safety behaviour has been implemented through a multi-threaded software architecture in order to share information between both systems. Thereby, the localization measurements obtained by the human tracking system are processed by the robot control system to compute the minimum human-robot distance and determine if the safety behaviour must be activated.Spanish Ministry of Science and Innovation and the Spanish Ministry of Education through the projects DPI2005-06222 and DPI2008-02647 and the grant AP2005-1458