The PreAmplifier ShAper for the ALICE TPC-Detector

In this paper the PreAmplifier ShAper (PASA) for the Time Projection Chamber (TPC) of the ALICE experiment at LHC is presented. The ALICE TPC PASA is an ASIC that integrates 16 identical channels, each consisting of Charge Sensitive Amplifiers (CSA) followed by a Pole-Zero network, self-adaptive bias network, two second-order bridged-T filters, two non-inverting level shifters and a start-up circuit. The circuit is optimized for a detector capacitance of 18-25 pF. For an input capacitance of 25 pF, the PASA features a conversion gain of 12.74 mV/fC, a peaking time of 160 ns, a FWHM of 190 ns, a power consumption of 11.65 mW/ch and an equivalent noise charge of 244e + 17e/pF. The circuit recovers smoothly to the baseline in about 600 ns. An integral non-linearity of 0.19% with an output swing of about 2.1 V is also achieved. The total area of the chip is 18 mm$^2$ and is implemented in AMS's C35B3C1 0.35 micron CMOS technology. Detailed characterization test were performed on about 48000 PASA circuits before mounting them on the ALICE TPC front-end cards. After more than two years of operation of the ALICE TPC with p-p and Pb-Pb collisions, the PASA has demonstrated to fulfill all requirements

Implicit feed-forward compensated op-amp with split pairs

Disclosed are systems implementing an implicit Feed-Forward Compensated (FFC) op-amp, where the main FFC port is realized by the P-side of the CMOS input structure of the 2nd and 3rd stages of the op-amp, while the main signal path is through the N-side. According to some embodiments, to balance the relative strengths of the main path and feed-forward paths, the 2nd-stage NMOS input pair is split into two pairs, one is used to route the main path while the other is used for auxiliary FFC. The disclosed implicit FCC op-amp is unconditionally stable with adequate phase lead. According to some embodiments, the disclosed op-amp, which may be a wide-band op-amp, can be used in highly linear applications operative at intermediate frequency (IF), such as signal buffers for high-performance data converters or radio-frequency (RF) modulators and demodulators, continuous-time (CT) filters or sigma-delta data converters.Board of Regents, University of Texas Syste