Mobility management in 5G heterogeneous networks

In recent years, mobile data traffic has increased exponentially as a result of widespread popularity and uptake of portable devices, such as smartphones, tablets and laptops. This growth has placed enormous stress on network service providers who are committed to offering the best quality of service to consumer groups. Consequently, telecommunication engineers are investigating innovative solutions to accommodate the additional load offered by growing numbers of mobile users. The fifth generation (5G) of wireless communication standard is expected to provide numerous innovative solutions to meet the growing demand of consumer groups. Accordingly the ultimate goal is to achieve several key technological milestones including up to 1000 times higher wireless area capacity and a significant cut in power consumption. Massive deployment of small cells is likely to be a key innovation in 5G, which enables frequent frequency reuse and higher data rates. Small cells, however, present a major challenge for nodes moving at vehicular speeds. This is because the smaller coverage areas of small cells result in frequent handover, which leads to lower throughput and longer delay. In this thesis, a new mobility management technique is introduced that reduces the number of handovers in a 5G heterogeneous network. This research also investigates techniques to accommodate low latency applications in nodes moving at vehicular speeds

A Calculation of WLAN Dwell Time Model for Wireless Network Selection

In an integrated wireless and mobile network, selecting a desired a network is an important issue. Parameters such as system load, service characteristics and user mobility are the main criteria in network selection strategy. In this paper, we devise a mobility estimation method for a Mobile Node (MN) during initial network selection and Vertical Handover (VHO). The method relies on a new prediction dwelling time and the Call Holding Time (CHT) of a user. By comparing the predicted dwelling time with the CHT, a MN is able to make decision which network is suitable to be used in order to minimize the VHO. The proposed theoretical model has been validated by the MonteCarlo experiments. The simulation results demonstrate the validity of the proposed method

A calculation of WLAN dwell time model for wireless network selection

In an integrated wireless and mobile network, selecting a desired a network is an important issue. Parameters such as system load, service characteristics and user mobility are the main criteria in network selection strategy. In this paper, we devise a mobility estimation method for a Mobile Node (MN) during initial network selection and Vertical Handover (VHO). The method relies on a new prediction dwelling time and the Call Holding Time (CHT) of a user. By comparing the predicted dwelling time with the CHT, a MN is able to make decision which network is suitable to be used in order to minimize the VHO. The proposed theoretical model has been validated by the MonteCarlo experiments. The simulation results demonstrate the validity of the proposed method

Design of interface selection protocols for multi-homed wireless networks

This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University on 10 December 2010.The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of ‘unreachable zones’, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios

Exploiting user contention to optimize proactive resource allocation in future networks

In order to provide ubiquitous communication, seamless connectivity is now required in all environments including highly mobile networks. By using vertical handover techniques it is possible to provide uninterrupted communication as connections are dynamically switched between wireless networks as users move around. However, in a highly mobile environment, traditional reactive approaches to handover are inadequate. Therefore, proactive handover techniques, in which mobile nodes attempt to determine the best time and place to handover to local networks, are actively being investigated in the context of next generation mobile networks. The Y-Comm Framework which looks at proactive handover techniques has de�fined two key parameters: Time Before Handover and the Network Dwell Time, for any given network topology. Using this approach, it is possible to enhance resource management in common networks using probabilistic mechanisms because it is now possible to express contention for resources in terms of: No Contention, Partial Contention and Full Contention. As network resources are shared between many users, resource management must be a key part of any communication system as it is needed to provide seamless communication and to ensure that applications and servers receive their required Quality-of-Service. In this thesis, the contention for channel resources being allocated to mobile nodes is analysed. The work presents a new methodology to support proactive resource allocation for emerging future networks such as Vehicular Ad-Hoc Networks (VANETs) by allowing us to calculate the probability of contention based on user demand of network resources. These results are veri�ed using simulation. In addition, this proactive approach is further enhanced by the use of a contention queue to detect contention between incoming requests and those waiting for service. This thesis also presents a new methodology to support proactive resource allocation for future networks such as Vehicular Ad-Hoc Networks. The proposed approach has been applied to a vehicular testbed and results are presented that show that this approach can improve overall network performance in mobile heterogeneous environments. The results show that the analysis of user contention does provide a proactive mechanism to improve the performance of resource allocation in mobile networks

Design of interface selection protocols for multi-homed wireless networks

The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of ‘unreachable zones’, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Connection Robustness for Wireless Moving Networks Using Transport Layer Multi-homing

Given any form of mobility management through wireless communication, one useful enhancement is improving the reliability and robustness of transport-layer connections in a heterogeneous mobile environment. This is particularly true in the case of mobile networks with multiple vertical handovers. In this thesis, issues and challenges in mobility management for mobile terminals in such a scenario are addressed, and a number of techniques to facilitate and improve efficiency and the QoS for such a handover are proposed and investigated. These are initially considered in an end-to-end context and all protocols and changes happened in the middleware of the connection where the network is involved with handover issues and end user transparency is satisfied. This thesis begins by investigating mobility management solutions particularly the transport layer models, also making significant observation pertinent to multi-homing for moving networks in general. A new scheme for transport layer tunnelling based on SCTP is proposed. Consequently a novel protocol to handle seamless network mobility in heterogeneous mobile networks, named nSCTP, is proposed. Efficiency of this protocol in relation to QoS for handover parameters in an end-to-end connection while wired and wireless networks are available is considered. Analytically and experimentally it has been proved that this new scheme can significantly increase the throughput, particularly when the mobile networks roam frequently. The detailed plan for the future improvements and expansion is also provided

ACO-BASED VELOCITY-AWARE HANDOVER SCHEME FOR SEAMLESS MOBILE COMMUNICATIONS

芝浦工業大学201

Connection robustness for wireless moving networks using transport layer multi-homing

Given any form of mobility management through wireless communication, one useful enhancement is improving the reliability and robustness of transport-layer connections in a heterogeneous mobile environment. This is particularly true in the case of mobile networks with multiple vertical handovers. In this thesis, issues and challenges in mobility management for mobile terminals in such a scenario are addressed, and a number of techniques to facilitate and improve efficiency and the QoS for such a handover are proposed and investigated. These are initially considered in an end-to-end context and all protocols and changes happened in the middleware of the connection where the network is involved with handover issues and end user transparency is satisfied. This thesis begins by investigating mobility management solutions particularly the transport layer models, also making significant observation pertinent to multi-homing for moving networks in general. A new scheme for transport layer tunnelling based on SCTP is proposed. Consequently a novel protocol to handle seamless network mobility in heterogeneous mobile networks, named nSCTP, is proposed. Efficiency of this protocol in relation to QoS for handover parameters in an end-to-end connection while wired and wireless networks are available is considered. Analytically and experimentally it has been proved that this new scheme can significantly increase the throughput, particularly when the mobile networks roam frequently. The detailed plan for the future improvements and expansion is also provided.EThOS - Electronic Theses Online ServiceGBUnited Kingdo