Layer 2 Path Selection Protocol for Wireless Mesh Networks with Smart Antennas

In this thesis the possibilities of smart antenna systems in wireless mesh networks are examined. With respect to the individual smart antenna tradeoffs, a routing protocol (Modified HWMP, MHWMP) for IEEE 802.11s mesh networks is presented, that exploits the full range of benefits provided by smart antennas: MHWMP actively switches between the PHY-layer transmission/reception modes (multiplexing, beamforming and diversity) according to the wireless channel conditions. Spatial multiplexing and beamforming are used for unicast data transmissions, while antenna diversity is employed for efficient broadcasts. To adapt to the directional channel environment and to take full benefit of the PHY capabilities, a respective MAC scheme is employed. The presented protocol is tested in extensive simulation and the results are examined.:1 Introduction 2 Wireless Mesh Networks 3 IEEE 802.11s 4 Smart Antenna Concepts 5 State of the Art: Wireless Mesh Networks with Smart Antennas 6 New Concepts 7 System Model 8 Results and Discussion 9 Conclusion and Future Wor

Security and Privacy Issues in Wireless Mesh Networks: A Survey

This book chapter identifies various security threats in wireless mesh network (WMN). Keeping in mind the critical requirement of security and user privacy in WMNs, this chapter provides a comprehensive overview of various possible attacks on different layers of the communication protocol stack for WMNs and their corresponding defense mechanisms. First, it identifies the security vulnerabilities in the physical, link, network, transport, application layers. Furthermore, various possible attacks on the key management protocols, user authentication and access control protocols, and user privacy preservation protocols are presented. After enumerating various possible attacks, the chapter provides a detailed discussion on various existing security mechanisms and protocols to defend against and wherever possible prevent the possible attacks. Comparative analyses are also presented on the security schemes with regards to the cryptographic schemes used, key management strategies deployed, use of any trusted third party, computation and communication overhead involved etc. The chapter then presents a brief discussion on various trust management approaches for WMNs since trust and reputation-based schemes are increasingly becoming popular for enforcing security in wireless networks. A number of open problems in security and privacy issues for WMNs are subsequently discussed before the chapter is finally concluded.Comment: 62 pages, 12 figures, 6 tables. This chapter is an extension of the author's previous submission in arXiv submission: arXiv:1102.1226. There are some text overlaps with the previous submissio

Traffic engineering multi-layer optimization for wireless mesh network transmission a campus network routing protocol transmission performance inhancement

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityThe wireless mesh network is a potential network for the future due to its excellent inherent characteristic for dynamic self-healing, self-configuration and self-organization. It also has the advantage of easy interoperability networking and the ability to form multi-linked ad-hoc networks. It has a decentralized topology, is cheap and highly scalable. Furthermore, its ease in deployment and easy maintenance are other inherent networking qualities. These aforementioned qualities of the wireless mesh network bring advantages to transmission capability of heterogeneous networks. However, transmissions in wireless mesh network create comparative performance based challenges such as congestion, load-balancing, scalability over increasing networks and coverage capacity. Consequently, these challenges and problems in the routing and switching of packets in the wireless mesh network routing protocols led to a proposal on the resolution of these failures with a combination algorithm and a management based security for the network and its transmitted packets. There are equally contentious services like reliability of the network and quality of service for real-time multimedia traffic flows with other challenges such as path computation and selection in the wireless mesh network. This thesis is therefore a cumulative proposal to the resolution of the outlined challenges and open research areas posed by using wireless mesh network routing protocol. It advances the resolution of these challenges in the mesh environment using a hybrid optimization – traffic engineering, to increase the effectiveness and the reliability of the network. It also proffers a cumulative resolution of the diverse contributions on wireless mesh network routing protocol and transmission. Adaptation and optimization are carried out on the wireless mesh network designed network using traffic engineering mechanism and technique. The research examines the patterns of mesh packet transmission and evaluates the challenges and failures in the mesh network packet transmission. It develops a solution based algorithm for resolutions and proposes the traffic engineering based solution.. These resultant performances and analysis are usually tested and compared over wireless mesh IEEE802.11n or other older proposed documented solution. This thesis used a carefully designed campus mesh network to show a comparative evaluation of an optimal performance of the mesh nodes and routers over a normal IEE802.11n based wireless domain network to show differentiation by optimization using the created algorithms. Furthermore, the indexes of performance being the metric are used to measure the utility and the reliability, including capacity and throughput at the destination during traffic engineered transmission. In addition, the security of these transmitted data and packets are optimized under a traffic engineered technique. Finally, this thesis offers an understanding to the security contribution using traffic engineering resolution to create a management algorithm for processing and computation of the wireless mesh networks security needs. The results of this thesis confirmed, completed and extended the existing predictions with real measurement

Medium Access Control and Routing Protocols Design for 5G

In future wireless systems, such as 5G and beyond, the current dominating human-centric communication systems will be complemented by a tremendous increase in the number of smart devices, equipped with radio devices, possibly sensors, and uniquely addressable. This will result in explosion of wireless traffic volume, and consequently exponential growth in demand of radio spectrum. There are different engineering techniques for resolving the cost and scarcity of radio spectrum such as coexistence of diverse devices on the same pool of radio resources, spectrum aggregations, adoption of mmWave bands with huge spectrum, etc. The aim of this thesis is to investigate Medium Access Control (MAC) and routing protocols for 5G and beyond radio networks. Two scenarios are addressed: heterogeneous scenario where scheduled and uncoordinated users coexist, and a scenario where drones are used for monitoring a given area. In the heterogeneous scenario scheduled users are synchronised with the Base Station (BS) and rely on centralised resource scheduler for assignment of time slots, while the uncoordinated users are asynchronous with each other and the BS and rely unslotted Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) for channel access. First, we address a single-hop network with advanced scheduling algorithm design and packet length adaptation schemes design. Second, we address a multi-hop network with novel routing protocol for enhancing performance of the scheduled users in terms of throughput, and coexistence of all network users. In the drone-based scenario, new routing protocols are designed to address the problems of Wireless Mesh Networks with monitoring drones. In particular, a novel optimised Hybrid Wireless Mesh Protocol (O-HWMP) for a quick and efficient discovery of paths is designed, and a capacity achieving routing and scheduling algorithm, called backpressure, investigated. To improve on the long-end-to-end delays of classical backpressure, a modified backpressure algorithm is proposed and evaluated

A new connectivity strategy for wireless mesh networks using dynamic spectrum access

The introduction of Dynamic Spectrum Access (DSA) marked an important juncture in the evolution of wireless networks. DSA is a spectrum assignment paradigm where devices are able to make real-time adjustment to their spectrum usage and adapt to changes in their spectral environment to meet performance objectives. DSA allows spectrum to be used more efficiently and may be considered as a viable approach to the ever increasing demand for spectrum in urban areas and the need for coverage extension to unconnected communities. While DSA can be applied to any spectrum band, the initial focus has been in the Ultra-High Frequency (UHF) band traditionally used for television broadcast because the band is lightly occupied and also happens to be ideal spectrum for sparsely populated rural areas. Wireless access in general is said to offer the most hope in extending connectivity to rural and unconnected peri-urban communities. Wireless Mesh Networks (WMN) in particular offer several attractive characteristics such as multi-hopping, ad-hoc networking, capabilities of self-organising and self-healing, hence the focus on WMNs. Motivated by the desire to leverage DSA for mesh networking, this research revisits the aspect of connectivity in WMNs with DSA. The advantages of DSA when combined with mesh networking not only build on the benefits, but also creates additional challenges. The study seeks to address the connectivity challenge across three key dimensions, namely network formation, link metric and multi-link utilisation. To start with, one of the conundrums faced in WMNs with DSA is that the current 802.11s mesh standard provides limited support for DSA, while DSA related standards such as 802.22 provide limited support for mesh networking. This gap in standardisation complicates the integration of DSA in WMNs as several issues are left outside the scope of the applicable standard. This dissertation highlights the inadequacy of the current MAC protocol in ensuring TVWS regulation compliance in multi-hop environments and proposes a logical link MAC sub-layer procedure to fill the gap. A network is considered compliant in this context if each node operates on a channel that it is allowed to use as determined for example, by the spectrum database. Using a combination of prototypical experiments, simulation and numerical analysis, it is shown that the proposed protocol ensures network formation is accomplished in a manner that is compliant with TVWS regulation. Having tackled the compliance problem at the mesh formation level, the next logical step was to explore performance improvement avenues. Considering the importance of routing in WMNs, the study evaluates link characterisation to determine suitable metric for routing purposes. Along this dimension, the research makes two main contributions. Firstly, A-link-metric (Augmented Link Metric) approach for WMN with DSA is proposed. A-link-metric reinforces existing metrics to factor in characteristics of a DSA channel, which is essential to improve the routing protocol's ranking of links for optimal path selection. Secondly, in response to the question of “which one is the suitable metric?”, the Dynamic Path Metric Selection (DPMeS) concept is introduced. The principal idea is to mechanise the routing protocol such that it assesses the network via a distributed probing mechanism and dynamically binds the routing metric. Using DPMeS, a routing metric is selected to match the network type and prevailing conditions, which is vital as each routing metric thrives or recedes in performance depending on the scenario. DPMeS is aimed at unifying the years worth of prior studies on routing metrics in WMNs. Simulation results indicate that A-link-metric achieves up to 83.4 % and 34.6 % performance improvement in terms of throughput and end-to-end delay respectively compared to the corresponding base metric (i.e. non-augmented variant). With DPMeS, the routing protocol is expected to yield better performance consistently compared to the fixed metric approach whose performance fluctuates amid changes in network setup and conditions. By and large, DSA-enabled WMN nodes will require access to some fixed spectrum to fall back on when opportunistic spectrum is unavailable. In the absence of fully functional integrated-chip cognitive radios to enable DSA, the immediate feasible solution for the interim is single hardware platforms fitted with multiple transceivers. This configuration results in multi-band multi-radio node capability that lends itself to a variety of link options in terms of transmit/receive radio functionality. The dissertation reports on the experimental performance evaluation of radios operating in the 5 GHz and UHF-TVWS bands for hybrid back-haul links. It is found that individual radios perform differently depending on the operating parameter settings, namely channel, channel-width and transmission power subject to prevailing environmental (both spectral and topographical) conditions. When aggregated, if the radios' data-rates are approximately equal, there is a throughput and round-trip time performance improvement of 44.5 - 61.8 % and 7.5 - 41.9 % respectively. For hybrid links comprising radios with significantly unequal data-rates, this study proposes an adaptive round-robin (ARR) based algorithm for efficient multilink utilisation. Numerical analysis indicate that ARR provides 75 % throughput improvement. These results indicate that network optimisation overall requires both time and frequency division duplexing. Based on the experimental test results, this dissertation presents a three-layered routing framework for multi-link utilisation. The top layer represents the nodes' logical interface to the WMN while the bottom layer corresponds to the underlying physical wireless network interface cards (WNIC). The middle layer is an abstract and reductive representation of the possible and available transmission, and reception options between node pairs, which depends on the number and type of WNICs. Drawing on the experimental results and insight gained, the study builds criteria towards a mechanism for auto selection of the optimal link option. Overall, this study is anticipated to serve as a springboard to stimulate the adoption and integration of DSA in WMNs, and further development in multi-link utilisation strategies to increase capacity. Ultimately, it is hoped that this contribution will collectively contribute effort towards attaining the global goal of extending connectivity to the unconnected

Contributions to the routing of traffic flows in multi-hop IEEE 802.11 wireless networks

The IEEE 802.11 standard was not initially designed to provide multi-hop capabilities. Therefore, providing a proper traffic performance in Multi-Hop IEEE 802.11 Wireless Networks (MIWNs) becomes a significant challenge. The approach followed in this thesis has been focused on the routing layer in order to obtain applicable solutions not dependent on a specific hardware or driver. Nevertheless, as is the case of most of the research on this field, a cross-layer design has been adopted. Therefore, one of the first tasks of this work was devoted to the study of the phenomena which affect the performance of the flows in MIWNs. Different estimation methodologies and models are presented and analyzed. The first main contribution of this thesis is related to route creation procedures. First, FB-AODV is introduced, which creates routes and forwards packets according to the flows on the contrary to basic AODV which is destination-based. This enhancement permits to balance the load through the network and gives a finer granularity in the control and monitoring of the flows. Results showed that it clearly benefits the performance of the flows. Secondly, a novel routing metric called Weighted Contention and Interference routing Metric (WCIM) is presented. In all analyzed scenarios, WCIM outperformed the other analyzed state-of-the-art routing metrics due to a proper leveraging of the number of hops, the link quality and the suffered contention and interference. The second main contribution of this thesis is focused on route maintenance. Generally, route recovery procedures are devoted to the detection of link breaks due to mobility or fading. However, other phenomena like the arrival of new flows can degrade the performance of active flows. DEMON, which is designed as an enhancement of FB-AODV, allows the preemptive recovery of degraded routes by passively monitoring the performance of active flows. Results showed that DEMON obtains similar or better results than other published solutions in mobile scenarios, while it clearly outperforms the performance of default AODV under congestion Finally, the last chapter of this thesis deals with channel assignment in multi-radio solutions. The main challenge of this research area relies on the circular relationship between channel assignment and routing; channel assignment determines the routes that can be created, while the created routes decide the real channel diversity of the network and the level of interference between the links. Therefore, proposals which join routing and channel assignment are generally complex, centralized and based on traffic patterns, limiting their practical implementation. On the contrary, the mechanisms presented in this thesis are distributed and readily applicable. First, the Interference-based Dynamic Channel Assignment (IDCA) algorithm is introduced. IDCA is a distributed and dynamic channel assignment based on the interference caused by active flows which uses a common channel in order to assure connectivity. In general, IDCA leads to an interesting trade-off between connectivity preservation and channel diversity. Secondly, MR-DEMON is introduced as way of joining channel assignment and route maintenance. As DEMON, MR-DEMON monitors the performance of the active flows traversing the links, but, instead of alerting the source when noticing degradation, it permits reallocating the flows to less interfered channels. Joining route recovery instead of route creation simplifies its application, since traffic patterns are not needed and channel reassignments can be locally decided. The evaluation of MR-DEMON proved that it clearly benefits the performance of IDCA. Also, it improves DEMON functionality by decreasing the number of route recoveries from the source, leading to a lower overhead.El estándar IEEE 802.11 no fue diseñado inicialmente para soportar capacidades multi-salto. Debido a ello, proveer unas prestaciones adecuadas a los flujos de tráfico que atraviesan redes inalámbricas multi-salto IEEE 802.11 supone un reto significativo. La investigación desarrollada en esta tesis se ha centrado en la capa de encaminamiento con el objetivo de obtener soluciones aplicables y no dependientes de un hardware específico. Sin embargo, debido al gran impacto de fenómenos y parámetros relacionados con las capas físicas y de acceso al medio sobre las prestaciones de los tráficos de datos, se han adoptado soluciones de tipo cross-layer. Es por ello que las primeras tareas de la investigación, presentadas en los capítulos iniciales, se dedicaron al estudio y caracterización de estos fenómenos. La primera contribución principal de esta tesis se centra en mecanismos relacionados con la creación de las rutas. Primero, se introduce una mejora del protocolo AODV, que permite crear rutas y encaminar paquetes en base a los flujos de datos, en lugar de en base a los destinos como se da en el caso básico. Esto permite balacear la carga de la red y otorga un mayor control sobre los flujos activos y sus prestaciones, mejorando el rendimiento general de la red. Seguidamente, se presenta una métrica de encaminamiento sensible a la interferencia de la red y la calidad de los enlaces. Los resultados analizados, basados en la simulación de diferentes escenarios, demuestran que mejora significativamente las prestaciones de otras métricas del estado del arte. La segunda contribución está relacionada con el mantenimiento de las rutas activas. Generalmente, los mecanismos de mantenimiento se centran principalmente en la detección de enlaces rotos debido a la movilidad de los nodos o a la propagación inalámbrica. Sin embargo, otros fenómenos como la interferencia y congestión provocada por la llegada de nuevos flujos pueden degradar de forma significativa las prestaciones de los tráficos activos. En base a ello, se diseña un mecanismo de mantenimiento preventivo de rutas, que monitoriza las prestaciones de los flujos activos y permite su reencaminamiento en caso de detectar rutas degradadas. La evaluación de esta solución muestra una mejora significativa sobre el mantenimiento de rutas básico en escenarios congestionados, mientras que en escenarios con nodos móviles obtiene resultados similares o puntualmente mejores que otros mecanismos preventivos diseñados específicamente para casos con movilidad. Finalmente, el último capítulo de la tesis se centra en la asignación de canales en entornos multi-canal y multi-radio con el objetivo de minimizar la interferencia entre flujos activos. El reto principal en este campo es la dependencia circular que se da entre la asignación de canales y la creación de rutas: la asignación de canales determina los enlaces existentes la red y por ello las rutas que se podrán crear, pero son finalmente las rutas y los tráficos activos quienes determinan el nivel real de interferencia que se dará en la red. Es por ello que las soluciones que proponen unificar la asignación de canales y el encaminamiento de tráficos son generalmente complejas, centralizadas y basadas en patrones de tráfico, lo que limita su implementación en entornos reales. En cambio, en nuestro caso adoptamos una solución distribuida y con mayor aplicabilidad. Primero, se define un algoritmo de selección de canales dinámico basado en la interferencia de los flujos activos, que utiliza un canal común en todos los nodos para asegurar la conectividad de la red. A continuación, se introduce un mecanismo que unifica la asignación de canales con el mantenimiento preventivo de las rutas, permitiendo reasignar flujos degradados a otros canales disponibles en lugar de reencaminarlos completamente. Ambas soluciones demuestran ser beneficiosas en este tipo de entornos.Postprint (published version

Towards an Optimized Traffic-Aware Routing in Wireless Mesh Networks

International audienceIn this paper we study through simulations the impact of PHY/MAC protocols on higher layers. In a comparative way, we investigate the effectiveness of some protocols when they coexist on a wireless mesh network environment. Results show that PHY/MAC parameters have an important impact on routing performances. Based on these results, we propose two tra c-aware routing metrics based on link availability. The information about the link availability/occupancy is picked up from lower layers using a cross-layer approach. The rst metric is load-sensitive and aims to balance the tra c load according to the availability of a link to support additional ows. The second metric reproduces better the capacity of a link since it is based on its residual bandwidth. Using several real experiments, we have shown that our proposals can accurately determine better paths in terms of throughput and delay. Our experiments are carried out into an heterogeneous IEEE 802.11n based network running with OLSR routing protocol

Hybrid LoRa-IEEE 802.11s Opportunistic Mesh Networking for Flexible UAV Swarming

Unmanned Aerial Vehicles (UAVs) and small drones are nowadays being widely used in heterogeneous use cases: aerial photography, precise agriculture, inspections, environmental data collection, search-and-rescue operations, surveillance applications, and more. When designing UAV swarm-based applications, a key "ingredient" to make them effective is the communication system (possible involving multiple protocols) shared by flying drones and terrestrial base stations. When compared to ground communication systems for swarms of terrestrial vehicles, one of the main advantages of UAV-based communications is the presence of direct Line-of-Sight (LOS) links between flying UAVs operating at an altitude of tens of meters, often ensuring direct visibility among themselves and even with some ground Base Transceiver Stations (BTSs). Therefore, the adoption of proper networking strategies for UAV swarms allows users to exchange data at distances (significantly) longer than in ground applications. In this paper, we propose a hybrid communication architecture for UAV swarms, leveraging heterogeneous radio mesh networking based on long-range communication protocols—such as LoRa and LoRaWAN—and IEEE 802.11s protocols. We then discuss its strengths, constraints, viable implementation, and relevant reference use cases

Performance evaluation of Wireless Mesh Network routing protocol for smart grid networks

Recent Advances in Wireless Mesh Networks (WMN) makes it one of the candidate communication technologies for Smart Grid Automatic Metering Infrastructure (AMI) because of its scalability and low cost of deployment. However, its capacity and multi-hoping performance in dynamic environment may not guarantee resilience and packet delivery reliability requirements of AMI. Theoretical and practical studies have shown that the multi-hoping capacity of a mesh network is constrained by increase in the number of nodes and number of hops in the network. In addition traffic requirements for smart meters will further compound WMN multi-hopping issues. In this paper, the performance of WMN when deployed for AMI is carried out using two wireless routing protocols; Hybrid Wireless Mesh Protocol (HWMP) and Optimised Link State Rout protocol (OLSR) in NS-3. Simulation results show that compared to the reliability requirement of AMI, there is need for improving the routing metric for both protocols. Furthermore, The Dynamic Link Exchange Protocol (DLEP) which allows layer 2 link estimation was proposed to enhance the route decision