1,685 research outputs found

    Efficient Automated Driving Strategies Leveraging Anticipation and Optimal Control

    Get PDF
    Automated vehicles and advanced driver assistance systems bring computation, sensing, and communication technologies that exceed human abilities in some ways. For example, automated vehicles may sense a panorama all at once, do not suffer from human impairments and distractions, and could wirelessly communicate precise data with neighboring vehicles. Prototype and commercial deployments have demonstrated the capability to relieve human operators of some driving tasks up to and including fully autonomous taxi rides in some areas. The ultimate impact of this technology’s large-scale market penetration on energy efficiency remains unclear, with potential negative factors like road use by empty vehicles competing with positive ones like automatic eco-driving. Fundamentally enabled by historic and look-ahead data, this dissertation addresses the use of automated driving and driver assistance to optimize vehicle motion for energy efficiency. Facets of this problem include car following, co-optimized acceleration and lane change planning, and collaborative multi-agent guidance. Optimal control, especially model predictive control, is used extensively to improve energy efficiency while maintaining safe and timely driving via constraints. Techniques including chance constraints and mixed integer programming help overcome uncertainty and non-convexity challenges. Extensions of these techniques to tractor trailers on sloping roads are provided by making use of linear parameter-varying models. To approach the wheel-input energy eco-driving problem over generally shaped sloping roads with the computational potential for closed-loop implementation, a linear programming formulation is constructed. Distributed and collaborative techniques that enable connected and automated vehicles to accommodate their neighbors in traffic are also explored and compared to centralized control. Using simulations and vehicle-in-the-loop car following experiments, the proposed algorithms are benchmarked against others that do not make use of look-ahead information

    Optimal Vehicle Motion Control to Mitigate Secondary Crashes after an Initial Impact.

    Full text link
    Statistical data of road traffic fatalities show that fatalities in multiple-event crashes are higher than in single-event crashes. Most vehicle safety systems were developed to mitigate first crash events. Few active safety systems can deal with subsequent crash events. After a first crash event, drivers may not react in a timely or correct manner, which can have devastating consequences. Production active safety systems such as Electronic Stability Control (ESC) may not react to a first crash event properly unless such events are within their design specifications. The goal of this thesis is to propose control strategies that bring the vehicle state back to regions where drivers and ESC can easily take over the control, so that the severity of possible subsequent (secondary) crashes can be reduced. Because the most contributing causes of fatal secondary crashes are large lateral deviations and heading angle changes, the proposed algorithms consider both lateral displacement and heading of the vehicle. To characterize the vehicle motion after a crash event, a collision force estimation method and a vehicle motion prediction scheme are proposed. The model-based algorithm uses sensing information from the early stage of a collision process, so that the collision force can be predicted and the desired vehicle state can be determined promptly. The final heading angles are determined off-line and results are stored in a look-up table for faster implementation. Linear Time Varying Model Predictive Control (LTV-MPC) method is used to obtain the control signals, with the key tire nonlinearities captured through linearization. This algorithm considers tire force constraints based on the combined-slip tire model. The computed high-level control signals are realized through a control allocation problem which maps vehicle motion commands to tire braking forces. For real-time implementation, a rule-based control strategy is obtained. Several rules were constructed, and results under the rule-based control are similar to those under the optimal control (LTV-MPC) method while avoiding heavy on-board computations. Lastly, this thesis proposes a preemptive steering control concept. By assessing the expected strength of an imminent collision force from another vehicle, a preemptive steering control is applied to mitigate the imminent impact.PhDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111343/1/bjukim_1.pd

    Sähköbussin nopeuden ja ohjauskulman säätö edellä ajavan ajoneuvon liike-radan seuraamisessa

    Get PDF
    Buses face problems when the capacity of a bus is limited but it should be larger to be able to carry more passengers. The capacity of a bus is already increased to its maximum that is allowed by the infrastructure. The capacity of a bus line could be increased by driving buses more frequently but it would increase costs, that is unwanted. Costs could be reduced by driving buses as platoons consisting of two buses where only the first bus would be operated by a professional driver and the second would be driven autonomously. Autonomous driving requires longitudinal and lateral control of a vehicle. The follower bus should be able to follow the path driven by the leader bus precisely and avoid inter-vehicular collisions while still driving as close together as possible to indicate other traffic that they move as a platoon. Lateral control is usually divided into path following and direct following methods in the literature. Path following methods include obtaining the path of the leader vehicle and following of that path. Path following methods are usually accurate in terms of lateral error but are complex and require a lot of computational capacity. Direct following methods are easy to compute but they do not guarantee precise path following. A simulation model consisting of two identical buses was developed. One longitudinal controller and four lateral control laws were proposed. Longitudinal controller was designed to work also in tight turns which is not usually investigated. Lateral control laws proposed were geometrical in nature and required only input as the relative position of the leader bus. Therefore, they did not require inter-vehicular communication. Longitudinal controller worked well for initialization of the system with inter-vehicular distances from 2 to 10 m. It worked well in acceleration and deceleration tests when both buses were loaded similarly but failed to prevent collisions when follower bus was loaded more heavily than the leader. In lateral controller tests, Pure Pursuit and Modified Pure Pursuit methods were able to follow the leader producing following lateral errors: 0,8 m and 1,1 m (steady-state tests), 0,8 m and 0,7 m (u-turn maneuver) and 0,3 m/0,4 m and 0,4 m/0,5 m (double lane change maneuver, 5 m/s/10 m/s respectively). Spline Pursuit method showed oscillatory behavior and did not follow the leader well. Circular Pursuit method showed also oscillatory behavior and did not follow the leader well. However, it showed better performance than the Spline Pursuit. It remains to be studied whether Pure Pursuit or Modified Pure Pursuit can challenge more sophisticated path following methods.Linja-autojen matkustajakapasiteetti on rajallinen, mikä aiheuttaa ongelmia, sillä sen tulisi olla suurempi. Kapasiteetti on jo nostettu suurimmalle mahdolliselle tasolle, mitä nykyinen infrastruktuuri mahdollistaa. Linja-autolinjan kapasiteettia voisi nostaa ajamalla linja-autoja tiheämmin. Tämä kuitenkin johtaa suurempiin kustannuksiin. Kustannuksia voisi vähentää ajamalla linja-autoja kahden ajoneuvon jonoina, joissa ensimmäistä ajo-neuvoa ohjaisi ammattilaiskuljettaja ja toinen olisi autonomisesti ohjattu. Autonominen ajaminen vaatii ajoneuvon nopeuden ja ohjauskulman säätöä. Seuraajalinja-auton pitää pystyä seuraamaan johtajalinja-auton ajamaa ajouraa tarkasti ja välttää törmäämistä johtajaan. Linja-autojen välinen etäisyys on kuitenkin oltava riittävän pieni, jotta se viestisi muulle liikenteelle, että ajoneuvot ajavat jonona. Kirjallisuus jakaa ohjauskulman säädön yleensä ajouran seuraamiseen ja suoraan seuraamiseen. Ajouran seuraaminen koostuu johtaja-ajoneuvon ajouran saamisesta ja tämän uran seuraamisesta. Ajouran seuraamisen metodit ovat yleensä tarkkoja poikittaisen virheen suhteen, mutta ovat monimutkaisia ja vaativat paljon laskennallista kapasiteettia. Suoran seuraamisen metodit ovat laskennallisesti kevyitä, mutta eivät takaa tarkkaa ajouran seuraamista. Kahdesta identtisestä linja-autosta koostuva simulaatiomalli kehitettiin. Yksi nopeussäädin ja neljä ohjauskulman säätölakia esitettiin. Nopeussäädin suunniteltiin toimimaan myös tiukoissa käännöksissä, mitä ei ole yleensä tutkittu. Ohjauskulman säätölait perustuivat geometriseen päättelyyn ja ne tarvitsivat vain johtajalinja-auton suhteellisen asentotiedon. Säätölait eivät vaatineet ajoneuvojen välistä kommunikaatiota. Nopeussäädin toimi järjestelmän alustamisessa ajoneuvojen välisen etäisyyden ollessa 2-10 m. Se toimi hyvin kiihdytys- ja jarrutustesteissä, kun molemmat linja-autot olivat lastattu identtisellä kuormalla, mutta epäonnistui estämään törmäämisen, kun seuraajalinja-auto oli lastattu suuremmalla kuormalla kuin johtaja. Ohjauskulman säädön testeissä Pure Pursuit ja Modified Pure Pursuit pystyivät seuraamaan johtajaa seuraavilla poikittaissuuntaisilla virheillä: 0,8 m ja 1,1 m (steady-state-testit), 0,8 m ja 0,7 m (u-käännös) ja 0,3 m/0,4 m ja 0,4 m/0,5 m (kaksoiskaistanvaihto, 5 m/s/10 m/s vastaavasti). Spline Pursuit käyttäytyi värähtelevästi eikä seurannut johtajaa hyvin. Circular Pursuit käyttäytyi värähtelevästi eikä seurannut johtajaa hyvin, mutta kuitenkin paremmin kuin Spline Pursuit. Jää nähtäväksi pystyykö Pure Pursuit tai Modified Pure Pursuit haastamaan monimutkaisempia ajouran seuraamisen metodeja

    Design and validation of decision and control systems in automated driving

    Get PDF
    xxvi, 148 p.En la última década ha surgido una tendencia creciente hacia la automatización de los vehículos, generando un cambio significativo en la movilidad, que afectará profundamente el modo de vida de las personas, la logística de mercancías y otros sectores dependientes del transporte. En el desarrollo de la conducción automatizada en entornos estructurados, la seguridad y el confort, como parte de las nuevas funcionalidades de la conducción, aún no se describen de forma estandarizada. Dado que los métodos de prueba utilizan cada vez más las técnicas de simulación, los desarrollos existentes deben adaptarse a este proceso. Por ejemplo, dado que las tecnologías de seguimiento de trayectorias son habilitadores esenciales, se deben aplicar verificaciones exhaustivas en aplicaciones relacionadas como el control de movimiento del vehículo y la estimación de parámetros. Además, las tecnologías en el vehículo deben ser lo suficientemente robustas para cumplir con los requisitos de seguridad, mejorando la redundancia y respaldar una operación a prueba de fallos. Considerando las premisas mencionadas, esta Tesis Doctoral tiene como objetivo el diseño y la implementación de un marco para lograr Sistemas de Conducción Automatizados (ADS) considerando aspectos cruciales, como la ejecución en tiempo real, la robustez, el rango operativo y el ajuste sencillo de parámetros. Para desarrollar las aportaciones relacionadas con este trabajo, se lleva a cabo un estudio del estado del arte actual en tecnologías de alta automatización de conducción. Luego, se propone un método de dos pasos que aborda la validación de ambos modelos de vehículos de simulación y ADS. Se introducen nuevas formulaciones predictivas basadas en modelos para mejorar la seguridad y el confort en el proceso de seguimiento de trayectorias. Por último, se evalúan escenarios de mal funcionamiento para mejorar la seguridad en entornos urbanos, proponiendo una estrategia alternativa de estimación de posicionamiento para minimizar las condiciones de riesgo

    A convex optimal control framework for autonomous vehicle intersection crossing

    Get PDF
    Cooperative vehicle management emerges as a promising solution to improve road traffic safety and efficiency. This paper addresses the speed planning problem for connected and autonomous vehicles (CAVs) at an unsignalized intersection with consideration of turning maneuvers. The problem is approached by a hierarchical centralized coordination scheme that successively optimizes the crossing order and velocity trajectories of a group of vehicles so as to minimize their total energy consumption and travel time required to pass the intersection. For an accurate estimate of the energy consumption of each CAV, the vehicle modeling framework in this paper captures 1) friction losses that affect longitudinal vehicle dynamics, and 2) the powertrain of each CAV in line with a battery-electric architecture. It is shown that the underlying optimization problem subject to safety constraints for powertrain operation, cornering and collision avoidance, after convexification and relaxation in some aspects can be formulated as two second-order cone programs, which ensures a rapid solution search and a unique global optimum. Simulation case studies are provided showing the tightness of the convex relaxation bounds, the overall effectiveness of the proposed approach, and its advantages over a benchmark solution invoking the widely used first-in-first-out policy. The investigation of Pareto optimal solutions for the two objectives (travel time and energy consumption) highlights the importance of optimizing their trade-off, as small compromises in travel time could produce significant energy savings

    Design and validation of decision and control systems in automated driving

    Get PDF
    xxvi, 148 p.En la última década ha surgido una tendencia creciente hacia la automatización de los vehículos, generando un cambio significativo en la movilidad, que afectará profundamente el modo de vida de las personas, la logística de mercancías y otros sectores dependientes del transporte. En el desarrollo de la conducción automatizada en entornos estructurados, la seguridad y el confort, como parte de las nuevas funcionalidades de la conducción, aún no se describen de forma estandarizada. Dado que los métodos de prueba utilizan cada vez más las técnicas de simulación, los desarrollos existentes deben adaptarse a este proceso. Por ejemplo, dado que las tecnologías de seguimiento de trayectorias son habilitadores esenciales, se deben aplicar verificaciones exhaustivas en aplicaciones relacionadas como el control de movimiento del vehículo y la estimación de parámetros. Además, las tecnologías en el vehículo deben ser lo suficientemente robustas para cumplir con los requisitos de seguridad, mejorando la redundancia y respaldar una operación a prueba de fallos. Considerando las premisas mencionadas, esta Tesis Doctoral tiene como objetivo el diseño y la implementación de un marco para lograr Sistemas de Conducción Automatizados (ADS) considerando aspectos cruciales, como la ejecución en tiempo real, la robustez, el rango operativo y el ajuste sencillo de parámetros. Para desarrollar las aportaciones relacionadas con este trabajo, se lleva a cabo un estudio del estado del arte actual en tecnologías de alta automatización de conducción. Luego, se propone un método de dos pasos que aborda la validación de ambos modelos de vehículos de simulación y ADS. Se introducen nuevas formulaciones predictivas basadas en modelos para mejorar la seguridad y el confort en el proceso de seguimiento de trayectorias. Por último, se evalúan escenarios de mal funcionamiento para mejorar la seguridad en entornos urbanos, proponiendo una estrategia alternativa de estimación de posicionamiento para minimizar las condiciones de riesgo

    Probabilistic Motion Planning for Automated Vehicles

    Get PDF
    This thesis targets the problem of motion planning for automated vehicles. As a prerequisite for their on-road deployment, automated vehicles must show an appropriate and reliable driving behavior in mixed traffic, i.e. alongside human drivers. Besides the uncertainties resulting from imperfect perception, occlusions and limited sensor range, also the uncertainties in the behavior of other traffic participants have to be considered. Related approaches for motion planning in mixed traffic often employ a deterministic problem formulation. The solution of such formulations is restricted to a single trajectory. Deviations from the prediction of other traffic participants are accounted for during replanning, while large uncertainties lead to conservative and over-cautious behavior. As a result of the shortcomings of these formulations in cooperative scenarios and scenarios with severe uncertainties, probabilistic approaches are pursued. Due to the need for real-time capability, however, a holistic uncertainty treatment often induces a strong limitation of the action space of automated vehicles. Moreover, safety and traffic rule compliance are often not considered. Thus, in this work, three motion planning approaches and a scenario-based safety approach are presented. The safety approach is based on an existing concept, which targets the guarantee that automated vehicles will never cause accidents. This concept is enhanced by the consideration of traffic rules for crossing and merging traffic, occlusions, limited sensor range and lane changes. The three presented motion planning approaches are targeted towards the different predominant uncertainties in different scenarios, while operating in a continuous action space. For non-interactive scenarios with clear precedence, a probabilistic approach is presented. The problem is modeled as a partially observable Markov decision process (POMDP). In contrast to existing approaches, the underlying assumption is that the prediction of the future progression of the uncertainty in the behavior of other traffic participants can be performed independently of the automated vehicle\u27s motion plan. In addition to this prediction of currently visible traffic participants, the influence of occlusions and limited sensor range is considered. Despite its thorough uncertainty consideration, the presented approach facilitates planning in a continuous action space. Two further approaches are targeted towards the predominant uncertainties in interactive scenarios. In order to facilitate lane changes in dense traffic, a rule-based approach is proposed. The latter seeks to actively reduce the uncertainty in whether other vehicles willingly make room for a lane change. The generated trajectories are safe and traffic rule compliant with respect to the presented safety approach. To facilitate cooperation in scenarios without clear precedence, a multi-agent approach is presented. The globally optimal solution to the multi-agent problem is first analyzed regarding its ambiguity. If an unambiguous, cooperative solution is found, it is pursued. Still, the compliance of other vehicles with the presumed cooperation model is checked, and a conservative fallback trajectory is pursued in case of non-compliance. The performance of the presented approaches is shown in various scenarios with intersecting lanes, partly with limited visibility, as well as lane changes and a narrowing without predefined right of way

    A Human Driver Model for Autonomous Lane Changing in Highways: Predictive Fuzzy Markov Game Driving Strategy

    Get PDF
    This study presents an integrated hybrid solution to mandatory lane changing problem to deal with accident avoidance by choosing a safe gap in highway driving. To manage this, a comprehensive treatment to a lane change active safety design is proposed from dynamics, control, and decision making aspects. My effort first goes on driver behaviors and relating human reasoning of threat in driving for modeling a decision making strategy. It consists of two main parts; threat assessment in traffic participants, (TV s) states, and decision making. The first part utilizes an complementary threat assessment of TV s, relative to the subject vehicle, SV , by evaluating the traffic quantities. Then I propose a decision strategy, which is based on Markov decision processes (MDPs) that abstract the traffic environment with a set of actions, transition probabilities, and corresponding utility rewards. Further, the interactions of the TV s are employed to set up a real traffic condition by using game theoretic approach. The question to be addressed here is that how an autonomous vehicle optimally interacts with the surrounding vehicles for a gap selection so that more effective performance of the overall traffic flow can be captured. Finding a safe gap is performed via maximizing an objective function among several candidates. A future prediction engine thus is embedded in the design, which simulates and seeks for a solution such that the objective function is maximized at each time step over a horizon. The combined system therefore forms a predictive fuzzy Markov game (FMG) since it is to perform a predictive interactive driving strategy to avoid accidents for a given traffic environment. I show the effect of interactions in decision making process by proposing both cooperative and non-cooperative Markov game strategies for enhanced traffic safety and mobility. This level is called the higher level controller. I further focus on generating a driver controller to complement the automated car’s safe driving. To compute this, model predictive controller (MPC) is utilized. The success of the combined decision process and trajectory generation is evaluated with a set of different traffic scenarios in dSPACE virtual driving environment. Next, I consider designing an active front steering (AFS) and direct yaw moment control (DYC) as the lower level controller that performs a lane change task with enhanced handling performance in the presence of varying front and rear cornering stiffnesses. I propose a new control scheme that integrates active front steering and the direct yaw moment control to enhance the vehicle handling and stability. I obtain the nonlinear tire forces with Pacejka model, and convert the nonlinear tire stiffnesses to parameter space to design a linear parameter varying controller (LPV) for combined AFS and DYC to perform a commanded lane change task. Further, the nonlinear vehicle lateral dynamics is modeled with Takagi-Sugeno (T-S) framework. A state-feedback fuzzy H∞ controller is designed for both stability and tracking reference. Simulation study confirms that the performance of the proposed methods is quite satisfactory

    Nachweislich sichere Bewegungsplanung für autonome Fahrzeuge durch Echtzeitverifikation

    Get PDF
    This thesis introduces fail-safe motion planning as the first approach to guarantee legal safety of autonomous vehicles in arbitrary traffic situations. The proposed safety layer verifies whether intended trajectories comply with legal safety and provides fail-safe trajectories when intended trajectories result in safety-critical situations. The presented results indicate that the use of fail-safe motion planning can drastically reduce the number of traffic accidents.Die vorliegende Arbeit führt ein neuartiges Verifikationsverfahren ein, mit dessen Hilfe zum ersten Mal die verkehrsregelkonforme Sicherheit von autonomen Fahrzeugen gewährleistet werden kann. Das Verifikationsverfahren überprüft, ob geplante Trajektorien sicher sind und generiert Rückfalltrajektorien falls diese zu einer unsicheren Situation führen. Die Ergebnisse zeigen, dass die Verwendung des Verfahrens zu einer deutlichen Reduktion von Verkehrsunfällen führt
    corecore