저전력 고성능 디지털 시스템을 위한 고신뢰도의 클럭 네트워크 설계 방법론

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2015. 8. 김태환.오늘날의 회로 설계에서 공정변이가 회로 클럭의 타이밍의 변이에 미치는 영향은 매우 커짐에 따라, 전통적으로 사용되던 클럭 트리 구조를 기반으로 한 클럭 네트워크를 사용하는 것은 한계에 부딪히게 되었고, 이를 극복하기 위한 여러가지 기술들이 제안되었다. 본 논문에서는 변이에 강한 클럭 네트워크를 설계하기 위해, 연구 및 사용되고 있는 세 가지 기술에 대해 소개하고, 이들을 개선한 연구들을 제안한다. 첫째로, 이 논문에서는 클럭의 타이밍 문제를 회로 제작 이후 단계에서 조정할 수 있는 포스트 실리콘 조정 클럭 버퍼를 배치하는 문제에 대해 서술한다. 포스트 실리콘 조정 버퍼는 클럭의 지연시간을 회로가 제작된 이후의 단계에서 조정하 여 클럭의 타이밍 문제를 해결할 수 있지만, 버퍼 자체의 크기 때문에 최소한의 개수만 가장 효율적인 위치에 배치해야 하는 문제가 있다. 본 논문에서는 이전의 연구가 회로의 수율을 계산할 때 시간이 많이 걸리는 몬테-카를로 시뮬레이션을 사용하기 때문에 탐색 가능한 포스트 실리콘 조정 버퍼의 배치가 제한되는 문제가 있음을 지적한 후, 기존에 제안되었던 그래프 기반 회로 수율 계산 기법을 사용하여 효율적인 포스트 실리콘 조정 버퍼 배치를 찾을 수 있는 점진적이고 체계적인 방법을 제시한다. 다음은 클럭 시차 스케쥴링 방법에 대한 연구를 서술한다. 최근의 연구에서 제안되었던, 플립-플롭의 클럭에서 출력까지의 딜레이가 클럭의 준비시간과 유지시간에 의존한다는 유연한 플립-플롭 타이밍 모델 연구는 기존의 플립-플롭의 타이밍 특성들이 고정된 값이라는 가정에 기반한 정적 타이밍 분석의 정확성 문제를 해결할 수 있는 중요한 연구이다. 본 논문에서는 새로운 모델을 고려하여, 이전에 고전적인 플립-플롭 타이밍 특성 모델을 기반으로 진행되었던 클럭 시차 스케쥴링의 최적화 문제를 유연한 플립-플롭 타이밍 모델을 고려하여 해결하였다. 본 연구에서는 주어진 회로의 준비시간과 유지시간의 여유시간을 반복적이고 체계적으로 최대화하여 문제를 해결하였다. 마지막으로 클럭 스파인 네트워크의 합성을 자동화하는 문제에 대해 서술한다. 전통적인 클럭 트리 구조가 공정변이 문제를 해결하지 못했기 때문에 클럭 메쉬를 포함하는 다양한 대안적 구조가 제안되었다. 클럭 메쉬의 경우 공정변이에 의한 클럭 시차를 줄일 수 있었지만 이를 위해 와이어나 버퍼 등의 자원을 많이 소모하는 문제를 가지고 있다. 두 구조의 중간적 구조에는 클럭 트리의 노드를 연결하는 크로스 링크를 삽입하는 구조와 클럭 스파인 구조가 있다. 클럭 트리에 점진적인 수정을 가하여 만드는 크로스 링크와 달리, 클럭 스파인 구조는 트리나 이후에 제안된 메쉬와는 완전히 별개의 구조로, 이를 합성하는 방법도 매우 다르다. 그렇기 때문에 클럭 스파인을 합성하는 알고리즘은 필수적이라고 할 수 있으나, 합성 방법론이나 이를 자동화하는 방법에 관한 연구는 아직 없다. 본 논문에서는 우선, 클럭-게이팅을 지원하는 클럭 스파인을 주어진 클럭 시차 및 클럭 슬루 조건을 만족하면서 자원 및 전력 소모량을 최소화하는 문제에 대해 서술한다. 그리고, 회로에서 주어진 플립-플롭들을 클럭-게이팅 조건에서의 연관성을 고려하고 조직화하여 클럭 스파인을 삽입한 후, 클럭 시차 및 슬루 조건을 고려하여 버퍼를 삽입하는 알고리즘을 제안한다. 요약하면, 본 논문에서는 클럭의 타이밍 문제를 해결하기 위해 포스트-실리콘 조정 클럭 버퍼를 사용하는 테크닉과 클럭 시차 스케쥴링을 유연한 플립-플롭 타이밍 모델에서 적용하는 테크닉을 제시하고, 클럭의 타이밍 문제와 전력 소모 문제를 한번에 해결하기 위한 새로운 클럭 스파인 네트워크를 합성하는 자동화 알고리즘을 제시한다.As the process variation is dominating to cause the clock timing variation among chips to be much large, conventional clock tree based clock network is not able to guarantee the timing constraint of a digital system. To overcome the limitations of traditional clock design techniques, various techniques have been studied. This dissertation addresses three techniques that have been widely used for designing robust clock network and proposes developed methods. First, it is widely accepted that post-silicon tunable (PST) clock buffers can effectively resolve the clock timing violation. Since PST buffers, which can reset the clock delay to flip-flops after the chip is manufactured, impose a non-trivial implementation area and control circuitry, it is very important to minimally allocate PST buffers while satisfying the chip yield constraint. In this dissertation, we (1) develop a graph-based chip yield computation technique which can update yields very efficiently and accurately for incremental PST buffer allocation, based on which we (2) propose a systematic (bottom-up and top-down with refinement) PST buffer allocation algorithm that is able to fully explore the design space of PST buffer allocation. Second, clock skew scheduling is one of the essential steps that must be carefully performed during the design process. This dissertation addresses the clock skew optimization problem integrated with the consideration of the interdependent relation between the setup and hold skews, and clk-to-Q delay of flip-flops, so that the time margin is more accurately and reliably set aside over that of the previous methods, which have never taken the integrated problem into account. Precisely, based on an accurate flexible model of setup skew, hold skew, and clk-to-Q delay, we propose a stepwise clock skew scheduling technique in which at each iteration, the worst slack of setup and hold skews is systematically and incrementally relaxed to maximally extend the time margin. Lastly, clock tree with cross links and clock spine have an intermediate characteristics for skew tolerance and power consumption, compared to clock tree and clock mesh which are two extreme structures of clock network. Unlike the clock tree with links between clock nodes, which is a sort of an incremental modification of the structure of clock tree, clock spine network is a completely separated structure from the structures of tree and mesh. Consequently, it is necessary and essential to develop a synthesis algorithm for clock spines, which will be compatible to the existing synthesis algorithms of clock trees and clock meshes. To this end, this dissertation first addresses the problem of automating the synthesis of clock-gated clock spines with the objective of minimizing total clock power while meeting the clock skew and slew constraints. The key idea of our proposed synthesis algorithm is to identify and group the flip-flops with tight correlation of clock-gating operations together to form a spine while accurately predicting and maintaining clock skew and slew variations through the buffer insertion and stub allocation. In summary, this dissertation presents clock tuning techniques with consideration of post-silicon tuning, flexible flip-flop timing model, and clock-gated clock spine synthesis algorithm.Abstract i Chapter 1 INTRODUCTION 1 1.1 Clock Distribution Network . . . . . . . . . . . . . . . . . . . . . 1 1.2 Process Variation . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3 Flexible Flip-flop Timing Model . . . . . . . . . . . . . . . . . . . 3 1.4 Clock Spine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.5 Contributions of This Dissertation . . . . . . . . . . . . . . . . . 6 Chapter 2 POST-SILICON TUNABLE CLOCK BUFFER ALLOCATION BASED ON FAST CHIP YIELD COMPUTATION 8 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.2 Systematic Exploration of PST Buffer Allocation . . . . . . . . . 10 2.2.1 Observations . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2.2 Problem Definition . . . . . . . . . . . . . . . . . . . . . . 15 2.2.3 Allocation Algorithm . . . . . . . . . . . . . . . . . . . . . 16 2.3 Fast Timing Yield Computation . . . . . . . . . . . . . . . . . . 17 2.3.1 Preliminaries . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.3.2 Incremental Yield Computation . . . . . . . . . . . . . . . 22 2.4 Experimental Result . . . . . . . . . . . . . . . . . . . . . . . . . 24 2.5 PST Buffer Configuration Techniques . . . . . . . . . . . . . . . 31 2.6 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Chapter 3 POST-SILICON TUNING BASED ON FLEXIBLE FLIP-FLOP TIMING 34 3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3.2 Preliminary and Definitions . . . . . . . . . . . . . . . . . . . . . 40 3.2.1 Flexible Flip-Flop Timing Model . . . . . . . . . . . . . . 40 3.2.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . 40 3.3 Motivational Examples . . . . . . . . . . . . . . . . . . . . . . . . 42 3.4 Clock Skew Scheduling for Slack Relaxation Based on Flexible Flip-Flop Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.4.1 Overall Flow . . . . . . . . . . . . . . . . . . . . . . . . . 46 3.4.2 Finding Local Clock Skew Schedule . . . . . . . . . . . . 48 3.5 Experimental Results . . . . . . . . . . . . . . . . . . . . . . . . . 51 3.6 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Chapter 4 SYNTHESIS FOR POWER-AWARE CLOCK SPINES 61 4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 4.2 Preliminaries and Motivation . . . . . . . . . . . . . . . . . . . . 64 4.2.1 Clock Spine . . . . . . . . . . . . . . . . . . . . . . . . . . 64 4.2.2 Activity Patterns . . . . . . . . . . . . . . . . . . . . . . . 67 4.2.3 Power Computation . . . . . . . . . . . . . . . . . . . . . 67 4.3 Algorithm for Clock Spine Synthesis . . . . . . . . . . . . . . . . 68 4.3.1 Problem Definition . . . . . . . . . . . . . . . . . . . . . . 68 4.3.2 Power-Aware Sink Clustering . . . . . . . . . . . . . . . . 70 4.3.3 Spine Relaxation . . . . . . . . . . . . . . . . . . . . . . . 77 4.3.4 Spine Buffer Allocation . . . . . . . . . . . . . . . . . . . 80 4.3.5 Top-Level Tree Construction . . . . . . . . . . . . . . . . 86 4.4 Experimental Results . . . . . . . . . . . . . . . . . . . . . . . . . 86 4.5 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Chapter 5 CONCLUSION 95 5.1 Chapter 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 5.2 Chapter 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 5.3 Chapter 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Bibliography 97 초록 106Docto

Synthesis of Clock Trees with Useful Skew based on Sparse-Graph Algorithms

Computer-aided design (CAD) for very large scale integration (VLSI) involve

Low-Power Embedded Design Solutions and Low-Latency On-Chip Interconnect Architecture for System-On-Chip Design

This dissertation presents three design solutions to support several key system-on-chip (SoC) issues to achieve low-power and high performance. These are: 1) joint source and channel decoding (JSCD) schemes for low-power SoCs used in portable multimedia systems, 2) efficient on-chip interconnect architecture for massive multimedia data streaming on multiprocessor SoCs (MPSoCs), and 3) data processing architecture for low-power SoCs in distributed sensor network (DSS) systems and its implementation. The first part includes a low-power embedded low density parity check code (LDPC) - H.264 joint decoding architecture to lower the baseband energy consumption of a channel decoder using joint source decoding and dynamic voltage and frequency scaling (DVFS). A low-power multiple-input multiple-output (MIMO) and H.264 video joint detector/decoder design that minimizes energy for portable, wireless embedded systems is also designed. In the second part, a link-level quality of service (QoS) scheme using unequal error protection (UEP) for low-power network-on-chip (NoC) and low latency on-chip network designs for MPSoCs is proposed. This part contains WaveSync, a low-latency focused network-on-chip architecture for globally-asynchronous locally-synchronous (GALS) designs and a simultaneous dual-path routing (SDPR) scheme utilizing path diversity present in typical mesh topology network-on-chips. SDPR is akin to having a higher link width but without the significant hardware overhead associated with simple bus width scaling. The last part shows data processing unit designs for embedded SoCs. We propose a data processing and control logic design for a new radiation detection sensor system generating data at or above Peta-bits-per-second level. Implementation results show that the intended clock rate is achieved within the power target of less than 200mW. We also present a digital signal processing (DSP) accelerator supporting configurable MAC, FFT, FIR, and 3-D cross product operations for embedded SoCs. It consumes 12.35mW along with 0.167mm2 area at 333MHz

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

Center for Aeronautics and Space Information Sciences

This report summarizes the research done during 1991/92 under the Center for Aeronautics and Space Information Science (CASIS) program. The topics covered are computer architecture, networking, and neural nets

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

The 1991 3rd NASA Symposium on VLSI Design

Papers from the symposium are presented from the following sessions: (1) featured presentations 1; (2) very large scale integration (VLSI) circuit design; (3) VLSI architecture 1; (4) featured presentations 2; (5) neural networks; (6) VLSI architectures 2; (7) featured presentations 3; (8) verification 1; (9) analog design; (10) verification 2; (11) design innovations 1; (12) asynchronous design; and (13) design innovations 2

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems