12,692 research outputs found
LVDS Serial AER Link performance
Address-Event-Representation (AER) is a
communication protocol for transferring asynchronous events
between VLSI chips, originally developed for bio-inspired
processing systems (for example, image processing). Such
systems may consist of a complicated hierarchical structure
with many chips that transmit data among them in real time,
while performing some processing (for example, convolutions).
The event information is transferred using a high speed digital
parallel bus (typically 16 bits and 20ns-40ns per event). This
paper presents a testing platform for AER systems that allows
analysing a LVDS Serial AER link produced by a Spartan 3
FPGA, or by a commercial LVDS transceiver. The interface
allows up to 0.728 Gbps (~40Mev/s, 16 bits/ev). The eye
diagram ensures that the platform could support 1.2 Gbps.Commission of the European Communities IST-2001-34124 (CAVIAR)Comisión Interministerial de Ciencia y Tecnología TIC-2003-08164-C03-0
A LVDS Serial AER Link
Address-Event-Representation (AER) is a
communication protocol for transferring asynchronous events
between VLSI chips, originally developed for bio-inspired
processing systems (for example, image processing). Such
systems may consist of a complicated hierarchical structure
with many chips that transmit data among them in real time,
while performing some processing (for example, convolutions).
The event information is transferred using a high speed digital
parallel bus (typically 16 bits and 20ns-40ns per event). This
paper presents a testing platform for AER systems that allows
to analyse a LVDS Serial AER link. The interface allows up to
0.7 Gbps (~40Mev/s, 16 bits/ev). The eye diagram ensures that
the platform could support 1.2 Gbps.Commission of the European Communities IST-2001-34124 (CAVIAR)Comisión Interministerial de Ciencia y Tecnología TIC-2003-08164-C03-0
Desynchronization: Synthesis of asynchronous circuits from synchronous specifications
Asynchronous implementation techniques, which measure logic delays at run time and activate registers accordingly, are inherently more robust than their synchronous counterparts, which estimate worst-case delays at design time, and constrain the clock cycle accordingly. De-synchronization is a new paradigm to automate the design of asynchronous circuits from synchronous specifications, thus permitting widespread adoption of asynchronicity, without requiring special design skills or tools. In this paper, we first of all study different protocols for de-synchronization and formally prove their correctness, using techniques originally developed for distributed deployment of synchronous language specifications. We also provide a taxonomy of existing protocols for asynchronous latch controllers, covering in particular the four-phase handshake protocols devised in the literature for micro-pipelines. We then propose a new controller which exhibits provably maximal concurrency, and analyze the performance of desynchronized circuits with respect to the original synchronous optimized implementation. We finally prove the feasibility and effectiveness of our approach, by showing its application to a set of real designs, including a complete implementation of the DLX microprocessor architectur
Analysis and equalization of data-dependent jitter
Data-dependent jitter limits the bit-error rate (BER) performance of broadband communication systems and aggravates synchronization in phase- and delay-locked loops used for data recovery. A method for calculating the data-dependent jitter in broadband systems from the pulse response is discussed. The impact of jitter on conventional clock and data recovery circuits is studied in the time and frequency domain. The deterministic nature of data-dependent jitter suggests equalization techniques suitable for high-speed circuits. Two equalizer circuit implementations are presented. The first is a SiGe clock and data recovery circuit modified to incorporate a deterministic jitter equalizer. This circuit demonstrates the reduction of jitter in the recovered clock. The second circuit is a MOS implementation of a jitter equalizer with independent control of the rising and falling edge timing. This equalizer demonstrates improvement of the timing margins that achieve 10/sup -12/ BER from 30 to 52 ps at 10 Gb/s
A 6.0-mW 10.0-Gb/s Receiver With Switched-Capacitor Summation DFE
A low-power receiver with a one-tap decision feedback equalization (DFE) was fabricated in 90-nm CMOS technology. The speculative equalization is performed using switched-capacitor-based addition at the front-end sample-hold circuit. In order to further reduce the power consumption, an analog multiplexer is used in the speculation technique implementation. A quarter-rate-clocking scheme facilitates the use of low-power front-end circuitry and CMOS clock buffers. The receiver was tested over channels with different levels of ISI. The signaling rate with BER<10^-12 was significantly increased with the use of DFE for short- to medium-distance PCB traces. At 10-Gb/s data rate, the receiver consumes less than 6.0 mW from a 1.0-V supply. This includes the power consumed in all quarter-rate clock buffers, but not the power of a clock recovery loop. The input clock phase and the DFE taps are adjusted externally
On board processor system study Final report
Development and characteristics of onboard processor syste
From FPGA to ASIC: A RISC-V processor experience
This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC
- …