Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors

This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs

Exploiting Properties of CMP Cache Traffic in Designing Hybrid Packet/Circuit Switched NoCs

Chip multiprocessors with few to tens of processing cores are already commercially available. Increased scaling of technology is making it feasible to integrate even more cores on a single chip. Providing the cores with fast access to data is vital to overall system performance. When a core requires access to a piece of data, the core's private cache memory is searched first. If a miss occurs, the data is looked up in the next level(s) of the memory hierarchy, where often one or more levels of cache are shared between two or more cores. Communication between the cores and the slices of the on-chip shared cache is carried through the network-on-chip(NoC). Interestingly, the cache and NoC mutually affect the operation of each other; communication over the NoC affects the access latency of cache data, while the cache organization generates the coherence and data messages, thus affecting the communication patterns and latency over the NoC. This thesis considers hybrid packet/circuit switched NoCs, i.e., packet switched NoCs enhanced with the ability to configure circuits. The communication and performance benefit that come from using circuits is predicated on amortizing the time cost incurred for configuring the circuits. To address this challenge, NoC designs are proposed that take advantage of properties of the cache traffic, namely temporal locality and predictability, to amortize or hide the circuit configuration time cost. First, a coarse-grained circuit configuration policy is proposed that exploits the temporal locality in the cache traffic to periodically configure circuits for the heavily communicating nodes. This allows the design of a locality-aware cache that promotes temporal communication locality through data placement, while designing suitable data replacement and migration policies. Next, a fine-grained configuration policy, called Déjà Vu switching, is proposed for leveraging predictability of data messages by initiating a circuit configuration as soon as a cache hit is detected and before the data becomes available. Its benefit is demonstrated for saving interconnect energy in multi-plane NoCs. Finally, a more proactive configuration policy is proposed for fast caches, where circuit reservations are initiated by request messages, which can greatly improve communication latency and system performance

Multicore architecture optimizations for HPC applications

From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics. This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss. Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget. Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP.Postprint (published version

Multicore architecture optimizations for HPC applications

From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics. This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss. Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget. Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP

Proximity coherence for chip-multiprocessors

Many-core architectures provide an efficient way of harnessing the growing numbers of transistors available in modern fabrication processes; however, the parallel programs run on these platforms are increasingly limited by the energy and latency costs of communication. Existing designs provide a functional communication layer but do not necessarily implement the most efficient solution for chip-multiprocessors, placing limits on the performance of these complex systems. In an era of increasingly power limited silicon design, efficiency is now a primary concern that motivates designers to look again at the challenge of cache coherence. The first step in the design process is to analyse the communication behaviour of parallel benchmark suites such as Parsec and SPLASH-2. This thesis presents work detailing the sharing patterns observed when running the full benchmarks on a simulated 32-core x86 machine. The results reveal considerable locality of shared data accesses between threads with consecutive operating system assigned thread IDs. This pattern, although of little consequence in a multi-node system, corresponds to strong physical locality of shared data between adjacent cores on a chip-multiprocessor platform. Traditional cache coherence protocols, although often used in chip-multiprocessor designs, have been developed in the context of older multi-node systems. By redesigning coherence protocols to exploit new patterns such as the physical locality of shared data, improving the efficiency of communication, specifically in chip-multiprocessors, is possible. This thesis explores such a design – Proximity Coherence – a novel scheme in which L1 load misses are optimistically forwarded to nearby caches via new dedicated links rather than always being indirected via a directory structure.EPSRC DTA research scholarshi

Improving Multiple-CMP Systems Using Token Coherence

Improvements in semiconductor technology now enable Chip Multiprocessors (CMPs). As many future computer systems will use one or more CMPs and support shared memory, such systems will have caches that must be kept coherent. Coherence is a particular challenge for Multiple-CMP (M-CMP) systems. One approach is to use a hierarchical protocol that explicitly separates the intra-CMP coherence protocol from the inter-CMP protocol, but couples them hierarchically to maintain coherence. However, hierarchical protocols are complex, leading to subtle, difficult-to-verify race conditions. Furthermore, most previous hierarchical protocols use directories at one or both levels, incurring indirections—and thus extra latency—for sharing misses, which are common in commercial workloads. In contrast, this paper exploits the separation of correctness substrate and performance policy in the recently-proposed token coherence protocol to develop the first M-CMP coherence protocol that is flat for correctness, but hierarchical for performance. Via model checking studies, we show that flat correctness eases verification. Via simulation with micro-benchmarks, we make new protocol variants more robust under contention. Finally, via simulation with commercial workloads on a commercial operating system, we show that new protocol variants can be 10-50% faster than a hierarchical directory protocol

Locality-oblivious cache organization leveraging single-cycle multi-hop NoCs

Locality has always been a critical factor in on-chip data placement on CMPs as accessing further-away caches has in the past been more costly than accessing nearby ones. Substantial research on locality-aware designs have thus focused on keeping a copy of the data private. However, this complicatesthe problem of data tracking and search/invalidation; tracking the state of a line at all on-chip caches at a directory or performing full-chip broadcasts are both non-scalable and extremely expensive solutions. In this paper, we make the case for Locality-Oblivious Cache Organization (LOCO), a CMP cache organization that leverages the on-chip network to create virtual single-cycle paths between distant caches, thus redefining the notion of locality. LOCO is a clustered cache organization, supporting both homogeneous and heterogeneous cluster sizes, and provides near single-cycle accesses to data anywhere within the cluster, just like a private cache. Globally, LOCO dynamically creates a virtual mesh connecting all the clusters, and performs an efficient global data search and migration over this virtual mesh, without having to resort to full-chip broadcasts or perform expensive directory lookups. Trace-driven and full system simulations running SPLASH-2 and PARSEC benchmarks show that LOCO improves application run time by up to 44.5% over baseline private and shared cache.Semiconductor Research CorporationUnited States. Defense Advanced Research Projects Agency (Semiconductor Technology Advanced Research Network

Efficient TLB-Based Detection of Private Pages in Chip Multiprocessors

© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Most of the data referenced by sequential and parallel applications running in current chip multiprocessors are referenced by a single thread, i.e., private. Recent proposals leverage this observation to improve many aspects of chip multiprocessors, such as reducing coherence overhead or the access latency to distributed caches. The effectiveness of those proposals depends to a large extent on the amount of detected private data. However, the mechanisms proposed so far do not consider neither thread migration nor the private use of data within different application phases. As a result, a considerable amount of private data is not detected. In order to increase the detection of private data, we propose a TLB-based mechanism that is able to account for both thread migration and application phases. Simulation results show that the average number of pages detected as private significantly increases from 43 percent in previous proposals up to 79 percent in ours while keeping a reasonable TLB miss rate. Furthermore, when our proposal is used to deactivate the coherence for private data in a directory protocol, it improves execution time by 13.5 percent, on average, with respect to previous techniques.This work was jointly supported by the MINECO and European Commission (FEDER funds) under the project TIN2012-38341-C04-01/03 and the Fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia under the project Jovenes Lideres en Investigacion 18956/JLI/13. Albert Esteve is the corresponding author.Esteve García, A.; Ros Bardisa, A.; Gómez Requena, ME.; Robles Martínez, A.; Duato Marín, JF. (2016). Efficient TLB-Based Detection of Private Pages in Chip Multiprocessors. IEEE Transactions on Parallel and Distributed Systems. 27(3):748-761. https://doi.org/10.1109/TPDS.2015.2412139S74876127