Critical Aspects of Electric Motor Drive Controllers and Mitigation of Torque Ripple - Review

Electric vehicles (EVs) are playing a vital role in sustainable transportation. It is estimated that by 2030, Battery EVs will become mainstream for passenger car transportation. Even though EVs are gaining interest in sustainable transportation, the future of EV power transmission is facing vital concerns and open research challenges. Considering the case of torque ripple mitigation and improved reliability control techniques in motors, many motor drive control algorithms fail to provide efficient control. To efficiently address this issue, control techniques such as Field Orientation Control (FOC), Direct Torque Control (DTC), Model Predictive Control (MPC), Sliding Mode Control (SMC), and Intelligent Control (IC) techniques are used in the motor drive control algorithms. This literature survey exclusively compares the various advanced control techniques for conventionally used EV motors such as Permanent Magnet Synchronous Motor (PMSM), Brushless Direct Current Motor (BLDC), Switched Reluctance Motor (SRM), and Induction Motors (IM). Furthermore, this paper discusses the EV-motors history, types of EVmotors, EV-motor drives powertrain mathematical modelling, and design procedure of EV-motors. The hardware results have also been compared with different control techniques for BLDC and SRM hub motors. Future direction towards the design of EV by critical selection of motors and their control techniques to minimize the torque ripple and other research opportunities to enhance the performance of EVs are also presented.publishedVersio

Motor Drive Technologies for the Power-by-Wire (PBW) Program: Options, Trends and Tradeoffs

Power-By-Wire (PBW) is a program involving the replacement of hydraulic and pneumatic systems currently used in aircraft with an all-electric secondary power system. One of the largest loads of the all-electric secondary power system will be the motor loads which include pumps, compressors and Electrical Actuators (EA's). Issues of improved reliability, reduced maintenance and efficiency, among other advantages, are the motivation for replacing the existing aircraft actuators with electrical actuators. An EA system contains four major components. These are the motor, the power electronic converters, the actuator and the control system, including the sensors. This paper is a comparative literature review in motor drive technologies, with a focus on the trends and tradeoffs involved in the selection of a particular motor drive technology. The reported research comprises three motor drive technologies. These are the induction motor (IM), the brushless dc motor (BLDCM) and the switched reluctance motor (SRM). Each of the three drives has the potential for application in the PBW program. Many issues remain to be investigated and compared between the three motor drives, using actual mechanical loads expected in the PBW program

Electronic Control of Torque Ripple in Brushless Motors

Merged with duplicate record 10026.1/727 on 27.02.2017 by CS (TIS)Brushless motors are increasingly popular because of their high power density, torque to inertia ratio and high efficiency. However an operational characteristic is the occurrence of torque ripple at low speeds. For demanding direct drive applications like machine tools, robot arms or aerospace applications it is necessary to reduce the level of torque ripple. This thesis presents an in depth investigation into the production and nature of torque ripple in brushless machines. Different torque ripple reduction strategies are evaluated and one reduction strategy using Park's transform as a tool is identified as the promising strategy. The unified machine theory is checked to clarify the theory behind Park's transform; in particular assumptions made and general validity of the theory. This torque ripple reduction strategy based on Park's transform is extended to include the effect of armature reaction. A novel adaptive torque ripple reduction algorithm is designed. The ineffectiveness of the conventional approach is demonstrated. Further a novel torque ripple reduction strategy using direct measurements of the torque ripple is suggested, reducing implementation time and allowing higher accuracies for torque ripple reduction. Extensive measurements from the experimental system show the validity of the novel torque ripple reduction strategies. The experimental results allow derivation of a formula for all load situations. This formula makes it possible to further increase the reduction accuracy and enables improved real time implementation of the torque ripple reduction algorithm. The work presented here makes a substantial contribution towards understanding the nature of torque ripple in brushless motors and solving the associated problems. The novel reduction strategies form the basis for the development of intelligent dynamometers for motor test beds. Further the torque ripple reduction method presented here can be used to overcome manufacturing imperfections in brushless machines thus removing the cost for precise manufacturing tools. Future designs of controllers can "build" their own correction formula during set-up runs, providing a motor specific torque ripple correction.Automotive Motion Technology Lt

Modeling and control of a brushless DC motor

Permanent magnet brushless DC motors (PMBLDC) find wide applications in industries due to their high power density and ease of control. These motors are generally controlled using a three phase power semiconductor bridge. For starting and the providing proper commutation sequence to turn on the power devices in the inverter bridge the rotor position sensors required. Based on the rotor position, the power devices are commutated sequentially every 60 degrees. To achieve desired level of performance the motor requires suitable speed controllers. In case of permanent magnet motors, usually speed control is achieved by using proportional-integral(PI) controller. Although conventional PI controllers are widely used in the industry due to their simple control structure and ease of implementation, these controllers pose difficulties where there are some control complexity such as nonlinearity, load disturbances and parametric variations. Moreover PI controllers require precise linear mathematical models. This thesis presents a Fuzzy Logic Controller(FLC) for speed control of a BLDC by using. The Fuzzy Logic(FL) approach applied to speed control leads to an improved dynamic behavior of the motor drive system and an immune to load perturbations and parameter variations. The FLC is designed using based on a simple analogy between the control surfaces of the FLC and a given Proportional-Integral controller(PIC) for the same application. Fuzzy logic control offers an improvement in the quality of the speed response, compared to PI control. This work focuses on investigation and evaluation of the performance of a permanent magnet brushless DC motor (PMBLDC) drive, controlled by PI, and Fuzzy logic speed controllers. The Controllers are for the PMBLDC motor drive simulated using MATLAB soft ware package. Further, the PI controller has been implemented on an experimental BLDC motor set up

Overview of permanent-magnet brushless drives for electric and hybrid electric vehicles

With ever-increasing concerns on our environment, there is a fast growing interest in electric vehicles (EVs) and hybrid EVs (HEVs) from automakers, governments, and customers. As electric drives are the core of both EVs and HEVs, it is a pressing need for researchers to develop advanced electric-drive systems. In this paper, an overview of permanent-magnet (PM) brushless (BL) drives for EVs and HEVs is presented, with emphasis on machine topologies, drive operations, and control strategies. Then, three major research directions of the PM BL drive systems are elaborated, namely, the magnetic-geared outer-rotor PM BL drive system, the PM BL integrated starter-generator system, and the PM BL electric variable-transmission system. © 2008 IEEE.published_or_final_versio

Emerging Multiport Electrical Machines and Systems: Past Developments, Current Challenges, and Future Prospects

Distinct from the conventional machines with only one electrical and one mechanical port, electrical machines featuring multiple electrical/mechanical ports (the so-called multiport electrical machines) provide a compact, flexible, and highly efficient manner to convert and/or transfer energies among different ports. This paper attempts to make a comprehensive overview of the existing multiport topologies, from fundamental characteristics to advanced modeling, analysis, and control, with particular emphasis on the extensively investigated brushless doubly fed machines for highly reliable wind turbines and power split devices for hybrid electric vehicles. A qualitative review approach is mainly adopted, but strong efforts are also made to quantitatively highlight the electromagnetic and control performance. Research challenges are identified, and future trends are discussed

Serangga dan mitos suku kaum jakun, Kampung Peta, Mersing Johor

This study focuses on seeing insects from the mythical perspective of the Orang Asli tribe of Jakun, Kampung Peta, Mersing Johor. The existence of insects in the life of every ethnic in Malaysia has brought various elements of myths. Therefore, when combining myths and insects, it could be said that myth is a human way of understanding, expressing and linking insects to him/herself as well as a group/culture. The practice of using insects among ethnic groups in daily life is called etnoentomology. In this study, the insects studied are the butterfly (Lepidoptera), the odonates (Odonata) and the cicadas (Homoptera). This is because these insects are very popular in the community and have their own myths that are brought into the local culture of belief

A novel, robust DSP-based indirect rotor position estimation for permanent magnet AC motors without rotor saliency

Copyright © 2003 IEEEThis paper proposes and implements a novel rotor position sensorless technique for PM AC motor drives, which allows acceleration from standstill and can operate under various practical operating conditions including transient speed changes. The technique developed here relies on the measurement of the phase voltages and currents of the motor. It uses the incremental values of flux linkage, and the back-EMF functions to estimate incremental rotor position. Using a phase-locked loop (PLL) algorithm, an internal closed-loop correction algorithm can correct rotor position estimation drift, which may be due to the motor parameter variations or measurement inaccuracies. The method is implemented in closed-loop using a digital signal processor (DSP), and details of the implementation are provided in the paper. To demonstrate accuracy, robustness and reliability of the position estimation scheme, the paper presents a number of real-time experimental results, including dynamic operating conditions.Li Ying and Nesimi Ertugr