Power quality and electromagnetic compatibility: special report, session 2

The scope of Session 2 (S2) has been defined as follows by the Session Advisory Group and the Technical Committee: Power Quality (PQ), with the more general concept of electromagnetic compatibility (EMC) and with some related safety problems in electricity distribution systems. Special focus is put on voltage continuity (supply reliability, problem of outages) and voltage quality (voltage level, flicker, unbalance, harmonics). This session will also look at electromagnetic compatibility (mains frequency to 150 kHz), electromagnetic interferences and electric and magnetic fields issues. Also addressed in this session are electrical safety and immunity concerns (lightning issues, step, touch and transferred voltages). The aim of this special report is to present a synthesis of the present concerns in PQ&EMC, based on all selected papers of session 2 and related papers from other sessions, (152 papers in total). The report is divided in the following 4 blocks: Block 1: Electric and Magnetic Fields, EMC, Earthing systems Block 2: Harmonics Block 3: Voltage Variation Block 4: Power Quality Monitoring Two Round Tables will be organised: - Power quality and EMC in the Future Grid (CIGRE/CIRED WG C4.24, RT 13) - Reliability Benchmarking - why we should do it? What should be done in future? (RT 15

Voltage Rise Problem in Distribution Networks with Distributed Generation: A Review of Technologies, Impact and Mitigation Approaches

Energy demand has constantly been on the rise due to aggressive industrialization and civilization. This rise in energy demand results in the massive penetration of distributed generation (DG) in the distribution network (DN) which has been a holistic approach to enhance the capacity of distribution networks. However, this has led to a number of issues in the low voltage network, one of which is the voltage rise problem. This happens when generation exceeds demand thereby causing reverse power flow and consequently leading to overvoltage. A number of methods have been discussed in the literature to overcome this challenge ranging from network augmentation to active management of the distribution networks. This paper discusses the issue of voltage rise problem and its impact on distribution networks with high amounts of distributed energy resources (DERs). It presents different DG technologies such as those based on conventional and unconventional resources and other DERs such as battery storage systems and fuel cells. The study provides a comprehensive overview of approaches employed to curtail the issue of voltage increase at the point of common coupling (PCC), which includes strategies based on the network reinforcement methodology and the active distribution network management. A techno-economic comparison is then introduced in the paper to ascertain the similarities and dissimilarities of different mitigation approaches based on the technology involved, ease of deployment, cost implication, and their pros and cons. The paper provides insights into directions for future research in mitigating the impact of voltage rise presented by grid-connected DGs without limiting their increased penetration in the existing power grid

Planning of power distribution systems with high penetration of renewable energy sources using stochastic optimization

Driven by techno-economic and environmental factors, there is a global drive to integrate more distributed energy resources in power systems, particularly at the distribution level. These typically include smart-grid enabling technologies, such as distributed generation (DG), energy storage systems and demand-side management. Especially, the scale of DG sources (mainly renewables) integrated in many distribution networks is steadily increasing. This trend is more likely to continue in the years to come due to the advent of emerging solutions, which are expected to alleviate existing technical limitations and facilitate smooth integration of DGs. The favorable agreements of countries to limit greenhouse gas (GHG) emissions and mitigate climate change are also expected to accelerate the integration of renewable energy sources (RESs). However, the intermittent and volatile nature of most of these RESs (particularly, wind and solar) makes their integration in distribution networks a more challenging task. This is because such resources introduce significant operational variability and uncertainty to the system. Hence, the development of novel methodologies and innovative computational tools is crucial to realize an optimal and cost-efficient integration of such DGs, minimizing also their side effects. Novel methodologies and innovative computational tools are developed in this thesis that take into account the operational variability and uncertainty associated with the RES power generation, along with the integration of smart-grid enabling technologies. The developed methodologies and computational tools are tested in real-life power systems, as well as in standard test systems, demonstrating their computational proficiency when compared with the current state-of-the-art. Due to the inherent uncertainty and variability of RESs, stochastic programming is used in this thesis. Moreover, to ensure convergence and to use efficient off-the-shelf solvers, the problems addressed in this thesis are formulated using a mixed integer linear programming (MILP) approach.Atualmente há um esforço global para integrar mais recursos energéticos distribuídos nas redes elétricas, impulsionado por fatores técnico-económicos e ambientais, particularmente ao nível da rede de distribuição. Estes recursos incluem tipicamente tecnologias facilitadoras das redes elétricas inteligentes, tais como geração distribuída, sistemas de armazenamento de energia, e gestão ativa da procura. A integração de fontes de geração distribuída (energias renováveis, principalmente) está a aumentar progressivamente em muitas redes de distribuição, e é provável que esta tendência continue nos próximos anos devido ao avanço de soluções emergentes, esperando-se assim que as limitações técnicas existentes sejam ultrapassadas e que facilitem a integração progressiva das fontes de geração distribuída. Espera-se também que os acordos feitos pelos países para limitar as emissões de gases de efeito de estufa e para mitigar as alterações climáticas acelerem a integração de fontes de energia renováveis. No entanto, a natureza intermitente e volátil da maioria das fontes de energia renováveis (em particular, eólica e solar) faz com que a sua integração nas redes de distribuição seja uma tarefa complexa. Isto porque tais recursos introduzem variabilidade operacional e incerteza no sistema. Assim, é essencial o desenvolvimento de novas metodologias e ferramentas computacionais inovadoras para beneficiar uma integração óptima da geração distribuída renovável e minimizar os possíveis efeitos colaterais. Nesta tese são desenvolvidas novas metodologias e ferramentas computacionais inovadoras que consideram a variabilidade operacional e a incerteza associadas à geração a partir de fontes de energia renováveis, juntamente com a integração de tecnologias facilitadoras das redes elétricas inteligentes. As metodologias e ferramentas computacionais desenvolvidas são testadas em casos de estudo reais, bem como em casos de estudo clássicos, demonstrando a sua proficiência computacional comparativamente ao atual estado-da-arte. Devido à inerente incerteza e variabilidade das fontes de energia renováveis, nesta tese utiliza-se programação estocástica. Ainda, para assegurar a convergência para soluções ótimas, o problema é formulado utilizando programação linear inteira-mista

Optimal planning of RDGs in electrical distribution networks using hybrid SAPSO algorithm

The impact of the renewable distributed generations (RDGs), such as photovoltaic (PV) and wind turbine (WT) systems can be positive or negative on the system, based on the location and size of the DG. So, the correct location and size of DG in the distribution network remain an obstacle to achieving their full possible benefits. Therefore, the future distribution networks with the high penetration of DG power must be planned and operated to improve their efficiency. Thus, this paper presents a new methodology for integrated of renewable energy-based DG units with electrical distribution network. Since the main objective of the proposed methodology is to reduce the power losses and improve the voltage profile of the radial distribution system (RDS). In this regard, the optimization problem was formulated using loss sensitivity factor (LSF), simulated annealing (SA), particle swarm optimization (PSO) and a combination of loss sensitivity index (LSI) with SA & PSO (LSISA, LSIPSO) respectively. This paper contributes a new methodology SAPSO, which prevents the defects of SA & PSO. Optimal placement and sizing of renewable energy-based DG tested on 33-bus system. The results demonstrate the reliability and robustness of the proposed SAPSO algorithm to find the near-optimal position and size of the DG units to mitigate the power losses and improve the radial distribution system's voltage profile

PLACEMENT OF DG AND CAPACITOR FOR LOSS REDUCTION AND RELIABILITY IMPROVEMENT IN RADIAL DISTRIBUTION SYSTEMS USING BFA

ABSTRACT This paper presents a methodology for determining the optimal location and capacity of Distributed Generator (DG) and capacitor in the radial distribution system in view of loss reduction and improvement in voltage profile and reliability. The overall objective function includes reliability index, power loss reduction, DG and capacitor investment cost and voltage deviation index. Customer and energy based indices i.e. SAIFI, SAIDI, CAIDI, AENS, and ASAI have been optimized by using the optimum values of failure rate. In this paper, the most recent Bacterial foraging algorithm (BFA) is used to find optimal location of single DG and capacitor in radial distribution systems. To evaluate the effectiveness of the proposed algorithm in finding best solutions, simulations are carried out with and without DG and capacitor installation on 10 bus and standard IEEE 33 bus radial distribution system. The obtained results are compared with binary particle swarm optimization algorithm (BPSO) for validation

A review of optimal planning active distribution system:Models, methods, and future researches

Due to the widespread deployment of distributed energy resources (DERs) and the liberalization of electricity market, traditional distribution networks are undergoing a transition to active distribution systems (ADSs), and the traditional deterministic planning methods have become unsuitable under the high penetration of DERs. Aiming to develop appropriate models and methodologies for the planning of ADSs, the key features of ADS planning problem are analyzed from the different perspectives, such as the allocation of DGs and ESS, coupling of operation and planning, and high-level uncertainties. Based on these analyses, this comprehensive literature review summarizes the latest research and development associated with ADS planning. The planning models and methods proposed in these research works are analyzed and categorized from different perspectives including objectives, decision variables, constraint conditions, and solving algorithms. The key theoretical issues and challenges of ADS planning are extracted and discussed. Meanwhile, emphasis is also given to the suitable suggestions to deal with these abovementioned issues based on the available literature and comparisons between them. Finally, several important research prospects are recommended for further research in ADS planning field, such as planning with multiple micro-grids (MGs), collaborative planning between ADSs and information communication system (ICS), and planning from different perspectives of multi-stakeholders

AI Applications to Power Systems

Today, the flow of electricity is bidirectional, and not all electricity is centrally produced in large power plants. With the growing emergence of prosumers and microgrids, the amount of electricity produced by sources other than large, traditional power plants is ever-increasing. These alternative sources include photovoltaic (PV), wind turbine (WT), geothermal, and biomass renewable generation plants. Some renewable energy resources (solar PV and wind turbine generation) are highly dependent on natural processes and parameters (wind speed, wind direction, temperature, solar irradiation, humidity, etc.). Thus, the outputs are so stochastic in nature. New data-science-inspired real-time solutions are needed in order to co-develop digital twins of large intermittent renewable plants whose services can be globally delivered

Decision Support for Smart Grid Planning and Operation Considering Reliability

[ES] Esta tesis aporta contribuciones a los temas de los sistemas de energía y la movilidad eléctrica. Por lo tanto, se proponen soluciones innovadoras para la planificación de la red de distribución radial tradicional sin o con pocas unidades de recursos energéticos distribuidos, y para la planificación, operación, reconfiguración, y gestión de recursos energéticos en redes de distribución en media tensión considerando una alta penetración de los recursos energéticos distribuidos en el contexto de las redes inteligentes. Las preocupaciones sobre la disponibilidad de combustibles fósiles y el aumento de los efectos climático causados por su uso generalizado en la generación de electricidad han llevado a varias políticas e incentivos para atenuar estos problemas. Estas medidas contribuyeron a inversiones considerables en fuentes de energía renovables y motivaron muchas iniciativas de redes inteligentes. Aunque el panorama futuro de los sistemas eléctricos modernos parece muy prometedor, la integración a gran escala de fuentes de energía renovables de naturaleza intermitente, como la eólica y la fotovoltaica, plantea nuevos desafíos y limitaciones en la industria eléctrica actual. Hoy en día, el diseño de la red de distribución no está correctamente preparado para alojar una gran cantidad de fuentes de energía renovables distribuidas. Por lo tanto, los operadores del sistema de distribución reconocen la necesidad de cambiar el diseño de la red mediante la planificación y el refuerzo. A medida que aumenta la penetración de las fuentes de energía renovable, un agregador de energía puede proporcionar una generación y demanda altamente flexibles según lo requiere el paradigma de red inteligente. Además, esta entidad puede permitir lograr una alta integración de la oferta de energía renovable y aumentar el valor para los pequeños productores y consumidores que no pueden negociar directamente en el mercado mayorista. Sin embargo, la entidad agregadora de energía necesita herramientas adecuadas de apoyo a la decisión para superar los desafíos complejos y hacer frente a un gran número de recursos energéticos. Por lo tanto, la gestión de recursos energéticos es crucial para que la entidad agregadora de energía reduzca los costos de operación, aumente de los beneficios, reduzca la huella de carbono y mejore la estabilidad del sistema. En la perspectiva mundial actual, muchas personas se están mudando a las ciudades en busca de una mejor calidad de vida, contribuyendo de esta manera a la continua expansión de las áreas urbanas. En consecuencia, el sector de transportes está jugando un papel crítico en las emisiones de dióxido de carbono. Teniendo en cuenta esto, muchas ventajas medioambientales y económicas pueden ser obtenidas del cambio de los motores de combustión interna a los vehículos eléctricos. Sin embargo, este cambio contribuirá a una carga en la red de distribución, dando lugar a la posibilidad de congestión de la red. Por lo tanto, para facilitar la integración de la carga de los vehículos eléctricos en la red de distribución, un modelo de predicción del comportamiento del usuario de un vehículo eléctrico pode ser una herramienta muy importante. Además, el paradigma de la red inteligente está desafiando la estructura de control y operación convencional diseñado para redes de distribución pasivas. De este modo, la reconfiguración de la red de distribución será una estrategia esencial y significativa para el operador del sistema de distribución. En el estado del arte actual se identificó una falta de modelos, estrategias y herramientas de apoyo a la toma de decisiones adecuadas para los dominios de problemas de planificación, operación y gestión de recursos energéticos de redes de distribución en media tensión con una alta penetración de fuentes de energía distribuidas. Por lo tanto, surgen varios desafíos de investigación que llevan a la necesidad de desarrollar modelos nuevos e innovadores que aborden: a) el impacto de las fuentes de energía renovable y la variabilidad de la demanda en la planificación de la expansión a largo plazo, b) el problema de la gestión de los recursos energéticos a gran escala, teniendo en cuenta la demanda, las fuentes de energía renovables, los vehículos eléctricos y la variabilidad de los precios del mercado, c) el análisis de impacto de los precios de carga dinámicos de los vehículos eléctricos en la operación de la red de distribución y en el comportamiento del usuario del vehículo eléctrico. Además, en el contexto de la red de distribución de media tensión radial tradicional, también se verificó la necesidad de modelos innovadores para mejorar la confiabilidad a través de la identificación de nuevas inversiones en los componentes de la red. Por lo tanto, esta tesis propone soluciones innovadoras para hacer frente a todos estos vacíos y problemas. Para ese propósito, las contribuciones de la tesis, resultan en un innovador sistema de apoyo a la decisión llamado Advanced Decision Support Tool for Smart Grid Planning and Operation (SupporGrid). El SupporGrid se compone de un conjunto de modelos diversificados que juntos contribuyen a manejar la complejidad de la planificación tradicional de las redes de distribución radial (PlanTGrid), y para la planificación (PlanSGrid), operación (OperSGrid), y los problemas de gestión de recursos energéticos (ERMGrid) en redes de distribución de media tensión en el paradigma de red inteligente. PlanTGrid incluye un modelo de planificación de expansión para redes de distribución radial tradicionales para identificar la posibilidad de nuevas inversiones al costo mínimo. La planificación de la expansión a largo plazo de las redes de distribución en un contexto de red inteligente con una alta penetración de fuentes de energía renovables distribuidas y que trata las fuentes de incertidumbre se resuelve mediante el uso PlanSGrid. OperSGrid contiene una herramienta de simulación de viajes de los usuarios de los vehículos eléctricos funcionando en conjunto con un modelo de operación y reconfiguración que utiliza descomposición de Benders y precios marginales para comprender el impacto del precio de carga de energía dinámica en ambos lados: la red de distribución y el usuario de vehículo eléctrico. Para hacer frente a la gestión de recursos energéticos a gran escala con problemas de respuesta a la demanda y sistemas de almacenamiento de energía, así como con la variabilidad de la demanda, las fuentes de energía renovable, los vehículos eléctricos y el precio de mercado, ERMGrid incluye un modelo estocástico de dos etapas. Las metodologías desarrolladas para el sistema de soporte de decisiones se han probado y validado en escenarios realistas. Los resultados prometedores logrados en condiciones realistas respaldan la hipótesis de que las metodologías son adecuadas e innovadoras para la planificación de la red de distribución radial tradicional, y para la planificación, operación, reconfiguración y gestión de recursos energéticos a largo plazo de la red de distribución considerando alta penetración de recursos energéticos distribuidos y de vehículos eléctricos en el contexto de red inteligente. Los resultados prometedores logrados en condiciones realistas respaldan la hipótesis de que las metodologías son adecuadas e innovadoras para la planificación de la red de distribución radial tradicional, y para la planificación, operación, reconfiguración y gestión de recursos energéticos a largo plazo de la red de distribución considerando la alta distribución de recursos energéticos y la penetración de vehículos eléctricos. De hecho, este sistema de apoyo a la decisión mejorará el funcionamiento de las redes de distribución de media tensión, permitiendo ahorros para las partes interesadas