Micro-threading and FPGA implementation of a RISC microprocessor : a thesis presented in partial fulfilment of the requirements for the degree of Master of Science in Computer Science at Massey University, Palmerston North, New Zealand

Appendix E removed due to copyright restrictions. Articles are available in the print copy held in the libraryThis thesis is the outcome of research in two areas of computer technology: microprocessor and multi-processor architectures (specifically from the perspective of how differently they tolerate highly-latent and non-deterministic events), and hardware design of complex digital systems containing both datapath and control (particularly microprocessors). This thesis starts by pointing out that in order to achieve high processing speeds, current popular superscalar microprocessors (e.g. Intel Pentiums, Digital Alpha, etc) rely heavily on the technique of speculating the outcome of instruction flow in order to predict the behaviour of non-deterministic computing operations (as in loading operands from high-latency memory into the processor). This is fine only if the speculation is correct. But, what if it isn't? If the speculation fails, this would mean that the processor has to abandon its current decision (which now proved to be the wrong one) for the instruction flow path taken and to start all over again with the other path (the actual correct one). This is a waste of valuable processing time and hardware resources and a reduction of performance when speculation fails. Therefore, these processors can achieve high performance only when the majority of speculations are successful (being able to predict the right path). In an attempt to overcome the above shortcomings, the first part of this thesis is an investigation of the novel vector micro-threading architecture as an alternative approach to the current superscalar-based speculative microprocessor designs. Micro-threading is based on the not-so-novel multithreading technique, which avoids speculation altogether and instead, starts running a different thread of instructions while waiting for the non-determinism to be resolved. This utilizes the chip resources more efficiently without waste of any processing power. The rest of this thesis focuses on the baseline RISC processor platform, the MIPS R2000, which is reviewed first then partially synthesized from the RTL (Register Transfer Level) description using VHDL and then simulated and tested. This is conducted in order for future research to build upon and add the micro-threading architectural add-ons and modifications. Keywords: Micro-threading, Latency Tolerance, FPGA Synthesis, RISC Architecture, MIPS R2000 processor, VHDL

Low-complexity distributed issue queue

As technology evolves, power density significantly increases and cooling systems become more complex and expensive. The issue logic is one of the processor hotspots and, at the same time, its latency is crucial for the processor performance. We present a low-complexity FP issue logic (MB/spl I.bar/distr) that achieves high performance with small energy requirements. The MB/spl I.bar/distr scheme is based on classifying instructions and dispatching them into a set of queues depending on their data dependences. These instructions are selected for issuing based on an estimation of when their operands will be available, so the conventional wakeup activity is not required. Additionally, the functional units are distributed across the different queues. The energy required by the proposed scheme is substantially lower than that required by a conventional issue design, even if the latter has the ability of waking-up only unready operands. MB/spl I.bar/distr scheme reduces the energy-delay product by 35% and the energy-delay product by 18% with respect to a state-of-the-art approach.Peer ReviewedPostprint (published version

RingScalar: A Complexity-Effective Out-of-Order Superscalar Microarchitecture

RingScalar is a complexity-effective microarchitecture for out-of-order superscalar processors, that reduces the area, latency, and power of all major structures in the instruction flow. The design divides an N-way superscalar into N columns connected in a unidirectional ring, where each column contains a portion of the instruction window, a bank of the register file, and an ALU. The design exploits the fact that most decoded instructions are waiting on just one operand to use only a single tag per issue window entry, and to restrict instruction wakeup and value bypass to only communicate with the neighboring column. Detailed simulations of four-issue single-threaded machines running SPECint2000 show that RingScalar has IPC only 13% lower than an idealized superscalar, while providing large reductions in area, power, and circuit latency

Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Using MCD-DVS for dynamic thermal management performance improvement

With chip temperature being a major hurdle in microprocessor design, techniques to recover the performance loss due to thermal emergency mechanisms are crucial in order to sustain performance growth. Many techniques for power reduction in the past and some on thermal management more recently have contributed to alleviate this problem. Probably the most important thermal control technique is dynamic voltage and frequency scaling (DVS) which allows for almost cubic reduction in power with worst-case performance penalty only linear. So far, DVS techniques for temperature control have been studied at the chip level. Finer grain DVS is feasible if a globally-asynchronous locally-synchronous (GALS) design style is employed. GALS, also known as multiple-clock domain (MCD), allows for an independent voltage and frequency control for each one of the clock domains that are part of the chip. There are several studies on DVS for GALS that aim to improve energy and power efficiency but not temperature. This paper proposes and analyses the usage of DVS at the domain level to control temperature in a clustered MCD microarchitecture with the goal of improving the performance of applications that do not meet the thermal constraints imposed by the designers.Peer ReviewedPostprint (published version

A First Practical Fully Homomorphic Crypto-Processor Design: The Secret Computer is Nearly Here

Following a sequence of hardware designs for a fully homomorphic crypto-processor - a general purpose processor that natively runs encrypted machine code on encrypted data in registers and memory, resulting in encrypted machine states - proposed by the authors in 2014, we discuss a working prototype of the first of those, a so-called `pseudo-homomorphic' design. This processor is in principle safe against physical or software-based attacks by the owner/operator of the processor on user processes running in it. The processor is intended as a more secure option for those emerging computing paradigms that require trust to be placed in computations carried out in remote locations or overseen by untrusted operators. The prototype has a single-pipeline superscalar architecture that runs OpenRISC standard machine code in two distinct modes. The processor runs in the encrypted mode (the unprivileged, `user' mode, with a long pipeline) at 60-70% of the speed in the unencrypted mode (the privileged, `supervisor' mode, with a short pipeline), emitting a completed encrypted instruction every 1.67-1.8 cycles on average in real trials.Comment: 6 pages, draf