Advanced Trends in Wireless Communications

Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics

Design and implementation of a tuned Analog Front-End for extending VLC transmission range

Visible Light Communications (VLC) is currently considered one of the most promising Optical Wireless Communications (OWC) for commercial applications, due to the widespread deployment of Light Emitting Diodes (LEDs) for energy efficiency, durability and low cost. With the ability to provide several THz of bandwidth, VLC is expected to co-exist with legacy and future Radio Frequency (RF) media as a reliable solution to the rapid demand of high-speed wireless communication. Most current research on VLC is focused on achieving high data rates over short distances through various types of modulation schemes. Limited research work investigates long range VLC employing high power LEDs, while none of them employed analog filter design in the receiver side while using low power LED for transmission. This thesis work explores the design and easy implementation of a low cost visible light communication system for long-range applications. The main idea of the research is increasing the receiver sensitivity by employing an analog filtering stage within the receiver front-end while the transmission is carried out using a low-power commercial white light LED, enabling the system to provide both illumination and digital communication. The proposed VLC front-end employs a high gain, high Quality (Q) factor band pass filter with the Multiple Feed Back (MFB) topology, which operates at a defined centre frequency range. The proposed MFB active filter uses the gain of the operational amplifier at the defined transmission frequency maximizing the gain and therefore extending the transmission range. The band pass filter behaves as a resonant circuit which detects the desired signal at the transmitting centre frequency and rejects unwanted frequencies including ambient light noise frequencies. Two modulations schemes were used through this work On Off Keying (OOK) with Manchester encoding, and Pulse Width Modulation (PWM). To evaluate the viability of the proposed system several prototypes were designed, implemented and tested. Experimental results demonstrated that by employing the proposed front-end the transmission range could be extended up to 2m distance by Manchester coding and up to 5m by using PWM. Moreover, the proposed system showed robustness against ambient light interference under the indoor scenario. Another Arduino prototype was designed and implemented to test the ability of the system to transmit serial data between two PCs. Experimental results demonstrated that the filtering stage is able to improve the receiver sensitivity and extend the transmission distance however, only data rates below 1 kbps were read by the receiver Arduino due to low procession speed of the Arduino boards

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Lightweight mobile and wireless systems: technologies, architectures, and services

1Department of Information and Communication Systems Engineering (ICSE), University of the Aegean, 81100 Mytilene, Greece 2Department of Information Engineering and Computer Science (DISI), University of Trento, 38123 Trento, Italy 3Department of Informatics, Alexander Technological Educational Institute of Thessaloniki, Thessaloniki, 574 00 Macedonia, Greece 4Centre Tecnologic de Telecomunicacions de Catalunya (CTTC), 08860 Barcelona, Spain 5North Carolina State University (NCSU), Raleigh, NC 27695, US

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

5G Outlook – Innovations and Applications

5G Outlook - Innovations and Applications is a collection of the recent research and development in the area of the Fifth Generation Mobile Technology (5G), the future of wireless communications. Plenty of novel ideas and knowledge of the 5G are presented in this book as well as divers applications from health science to business modeling. The authors of different chapters contributed from various countries and organizations. The chapters have also been presented at the 5th IEEE 5G Summit held in Aalborg on July 1, 2016. The book starts with a comprehensive introduction on 5G and its need and requirement. Then millimeter waves as a promising spectrum to 5G technology is discussed. The book continues with the novel and inspiring ideas for the future wireless communication usage and network. Further, some technical issues in signal processing and network design for 5G are presented. Finally, the book ends up with different applications of 5G in distinct areas. Topics widely covered in this book are: • 5G technology from past to present to the future• Millimeter- waves and their characteristics• Signal processing and network design issues for 5G• Applications, business modeling and several novel ideas for the future of 5

5G: 2020 and Beyond

The future society would be ushered in a new communication era with the emergence of 5G. 5G would be significantly different, especially, in terms of architecture and operation in comparison with the previous communication generations (4G, 3G...). This book discusses the various aspects of the architecture, operation, possible challenges, and mechanisms to overcome them. Further, it supports users? interac- tion through communication devices relying on Human Bond Communication and COmmunication-NAvigation- SENsing- SErvices (CONASENSE).Topics broadly covered in this book are; • Wireless Innovative System for Dynamically Operating Mega Communications (WISDOM)• Millimeter Waves and Spectrum Management• Cyber Security• Device to Device Communicatio