Early Packet Rejection Using Dynamic Binary Decision Diagram

A firewall is a hardware or software device that performs inspection on a given incoming/outgoing packets and decide whether to allow/deny the packet from entering/leaving the system. Firewall filters the packets by using a set of rules called firewall policies. The policies define what type of packets should be allowed or discarded. These policies describe the field values that the packet header must contain in order to match a policy in the firewall. The decision for any given packet is made by finding the first matching firewall policy, if any. In a traditional firewall, the packet filter goes through each policy in the list until a matching rule is found; the same process is again repeated for every packet that enters the firewall. The sequential lookup that the firewall uses to find the matching rule is time consuming and the total time it takes to perform the lookup increases as the policy in the list increases. Nowadays, a typical enterprise based firewall will have 1000+ firewall policy in it, which is normal. A major threat to network firewalls is specially crafted malicious packets that target the bottom rules of the firewall’s entire set of filtering rules. This attack’s main objective is to overload the firewall by processing a flood of network traffic that is matched against almost all the filtering rules before it gets rejected by a bottom rule. As a consequence of this malicious flooding network traffic, the firewall performance will decrease and the processing time of network traffic may increase significantly The current research work is based on the observation that an alternative method for the firewall policies can provide a faster lookup and hence a better filtering performance. The method proposed in this research relies on a basic fact that the policy c a n be represented as a simple Boolean expression. Thus, Binary Decision Diagrams (BDDs) are used as a basis for the representation of access list in this study. The contribution of this research work is a proposed method for representing firewall Policies using BDDs to improve the performance of packet filtering. The proposed mechanism is called Static Shuffling Binary Decision Diagram (SS-BDD), and is based on restructuring of the Binary Decision Diagram (BDD) by using byte-wise data structure instead of using Field-wise data structure. Real world traffic is used during the simulation phase to prove the performance of packet filtering. The numerical results obtained by the simulation shows that the proposed technique improves the performance for packet filtering significantly on medium to long access lists. Furthermore, using BDDs for representing the firewall policies provides other Useful characteristics that makes this a beneficial approach to in real world

Hardware Acceleration of Network Intrusion Detection System Using FPGA

This thesis presents new algorithms and hardware designs for Signature-based Network Intrusion Detection System (SB-NIDS) optimisation exploiting a hybrid hardwaresoftware co-designed embedded processing platform. The work describe concentrates on optimisation of a complete SB-NIDS Snort application software on a FPGA based hardware-software target rather than on the implementation of a single functional unit for hardware acceleration. Pattern Matching Hardware Accelerator (PMHA) based on Bloom filter was designed to optimise SB-NIDS performance for execution on a Xilinx MicroBlaze soft-core processor. The Bloom filter approach enables the potentially large number of network intrusion attack patterns to be efficiently represented and searched primarily using accesses to FPGA on-chip memory. The thesis demonstrates, the viability of hybrid hardware-software co-designed approach for SB-NIDS. Future work is required to investigate the effects of later generation FPGA technology and multi-core processors in order to clearly prove the benefits over conventional processor platforms for SB-NIDS. The strengths and weaknesses of the hardware accelerators and algorithms are analysed, and experimental results are examined to determine the effectiveness of the implementation. Experimental results confirm that the PMHA is capable of performing network packet analysis for gigabit rate network traffic. Experimental test results indicate that our SB-NIDS prototype implementation on relatively low clock rate embedded processing platform performance is approximately 1.7 times better than Snort executing on a general purpose processor on PC when comparing processor cycles rather than wall clock time

LightBox: Full-stack Protected Stateful Middlebox at Lightning Speed

Running off-site software middleboxes at third-party service providers has been a popular practice. However, routing large volumes of raw traffic, which may carry sensitive information, to a remote site for processing raises severe security concerns. Prior solutions often abstract away important factors pertinent to real-world deployment. In particular, they overlook the significance of metadata protection and stateful processing. Unprotected traffic metadata like low-level headers, size and count, can be exploited to learn supposedly encrypted application contents. Meanwhile, tracking the states of 100,000s of flows concurrently is often indispensable in production-level middleboxes deployed at real networks. We present LightBox, the first system that can drive off-site middleboxes at near-native speed with stateful processing and the most comprehensive protection to date. Built upon commodity trusted hardware, Intel SGX, LightBox is the product of our systematic investigation of how to overcome the inherent limitations of secure enclaves using domain knowledge and customization. First, we introduce an elegant virtual network interface that allows convenient access to fully protected packets at line rate without leaving the enclave, as if from the trusted source network. Second, we provide complete flow state management for efficient stateful processing, by tailoring a set of data structures and algorithms optimized for the highly constrained enclave space. Extensive evaluations demonstrate that LightBox, with all security benefits, can achieve 10Gbps packet I/O, and that with case studies on three stateful middleboxes, it can operate at near-native speed.Comment: Accepted at ACM CCS 201

Design and Evaluation of Packet Classification Systems, Doctoral Dissertation, December 2006

Although many algorithms and architectures have been proposed, the design of efficient packet classification systems remains a challenging problem. The diversity of filter specifications, the scale of filter sets, and the throughput requirements of high speed networks all contribute to the difficulty. We need to review the algorithms from a high-level point-of-view in order to advance the study. This level of understanding can lead to significant performance improvements. In this dissertation, we evaluate several existing algorithms and present several new algorithms as well. The previous evaluation results for existing algorithms are not convincing because they have not been done in a consistent way. To resolve this issue, an objective evaluation platform needs to be developed. We implement and evaluate several representative algorithms with uniform criteria. The source code and the evaluation results are both published on a web-site to provide the research community a benchmark for impartial and thorough algorithm evaluations. We propose several new algorithms to deal with the different variations of the packet classification problem. They are: (1) the Shape Shifting Trie algorithm for longest prefix matching, used in IP lookups or as a building block for general packet classification algorithms; (2) the Fast Hash Table lookup algorithm used for exact flow match; (3) the longest prefix matching algorithm using hash tables and tries, used in IP lookups or packet classification algorithms;(4) the 2D coarse-grained tuple-space search algorithm with controlled filter expansion, used for two-dimensional packet classification or as a building block for general packet classification algorithms; (5) the Adaptive Binary Cutting algorithm used for general multi-dimensional packet classification. In addition to the algorithmic solutions, we also consider the TCAM hardware solution. In particular, we address the TCAM filter update problem for general packet classification and provide an efficient algorithm. Building upon the previous work, these algorithms significantly improve the performance of packet classification systems and set a solid foundation for further study

Algorithms and Architectures for Network Search Processors

The continuous growth in the Internet’s size, the amount of data traffic, and the complexity of processing this traffic gives rise to new challenges in building high-performance network devices. One of the most fundamental tasks performed by these devices is searching the network data for predefined keys. Address lookup, packet classification, and deep packet inspection are some of the operations which involve table lookups and searching. These operations are typically part of the packet forwarding mechanism, and can create a performance bottleneck. Therefore, fast and resource efficient algorithms are required. One of the most commonly used techniques for such searching operations is the Ternary Content Addressable Memory (TCAM). While TCAM can offer very fast search speeds, it is costly and consumes a large amount of power. Hence, designing cost-effective, power-efficient, and high-speed search techniques has received a great deal of attention in the research and industrial community. In this thesis, we propose a generic search technique based on Bloom filters. A Bloom filter is a randomized data structure used to represent a set of bit-strings compactly and support set membership queries. We demonstrate techniques to convert the search process into table lookups. The resulting table data structures are kept in the off-chip memory and their Bloom filter representations are kept in the on-chip memory. An item needs to be looked up in the off-chip table only when it is found in the on-chip Bloom filters. By filtering the off-chip memory accesses in this fashion, the search operations can be significantly accelerated. Our approach involves a unique combination of algorithmic and architectural techniques that outperform some of the current techniques in terms of cost-effectiveness, speed, and power-efficiency