An accurate method to correct atmospheric phase delay for InSAR with the ERA5 global atmospheric model

Differential SAR Interferometry (DInSAR) has proven its unprecedented ability and merits of monitoring ground deformation on a large scale with centimeter to millimeter accuracy. However, atmospheric artifacts due to spatial and temporal variations of the atmospheric state often affect the reliability and accuracy of its results. The commonly-known Atmospheric Phase Screen (APS) appears in the interferograms as ghost fringes not related to either topography or deformation. Atmospheric artifact mitigation remains one of the biggest challenges to be addressed within the DInSAR community. State-of-the-art research works have revealed that atmospheric artifacts can be partially compensated with empirical models, point-wise GPS zenith path delay, and numerical weather prediction models. In this study, we implement an accurate and realistic computing strategy using atmospheric reanalysis ERA5 data to estimate atmospheric artifacts. With this approach, the Line-of-Sight (LOS) path along the satellite trajectory and the monitored points is considered, rather than estimating it from the zenith path delay. Compared with the zenith delay-based method, the key advantage is that it can avoid errors caused by any anisotropic atmospheric phenomena. The accurate method is validated with Sentinel-1 data in three different test sites: Tenerife island (Spain), Almería (Spain), and Crete island (Greece). The effectiveness and performance of the method to remove APS from interferograms is evaluated in the three test sites showing a great improvement with respect to the zenith-based approach.Peer ReviewedPostprint (published version

Refined estimation of time-varying baseline errors in airborne SAR interferometry

The processing of airborne synthetic aperture radar (SAR) data requires a precise compensation of the deviations of the platform movement from a straight line. This is usually carried out by recording the trajectory with a high-precision navigation system and correcting them during SAR focusing. However, due to the lack of accuracy in current navigation systems, residual motion errors persist in the images. Such residual motion errors are mainly noticeable in repeat-pass systems, where they are causing time-varying baseline errors, visible as artefacts in the derived phase maps. In this letter, a refined method for the estimation of time-varying baseline errors is presented. An improved multisquint processing approach is used for obtaining robust estimates of higher order baseline errors over the entire scene, even if parts of the scene are heavily decorrelated. In a subsequent step, the proposed method incorporates an external digital elevation model for detection of linear and constant components of the baseline error along azimuth. Calibration targets in the scene are not necessary.Peer Reviewe

Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

undefine

Long-term monitoring of geodynamic surface deformation using SAR interferometry

Thesis (Ph.D.) University of Alaska Fairbanks, 2014Synthetic Aperture Radar Interferometry (InSAR) is a powerful tool to measure surface deformation and is well suited for surveying active volcanoes using historical and existing satellites. However, the value and applicability of InSAR for geodynamic monitoring problems is limited by the influence of temporal decorrelation and electromagnetic path delay variations in the atmosphere, both of which reduce the sensitivity and accuracy of the technique. The aim of this PhD thesis research is: how to optimize the quantity and quality of deformation signals extracted from InSAR stacks that contain only a low number of images in order to facilitate volcano monitoring and the study of their geophysical signatures. In particular, the focus is on methods of mitigating atmospheric artifacts in interferograms by combining time-series InSAR techniques and external atmospheric delay maps derived by Numerical Weather Prediction (NWP) models. In the first chapter of the thesis, the potential of the NWP Weather Research & Forecasting (WRF) model for InSAR data correction has been studied extensively. Forecasted atmospheric delays derived from operational High Resolution Rapid Refresh for the Alaska region (HRRRAK) products have been compared to radiosonding measurements in the first chapter. The result suggests that the HRRR-AK operational products are a good data source for correcting atmospheric delays in spaceborne geodetic radar observations, if the geophysical signal to be observed is larger than 20 mm. In the second chapter, an advanced method for integrating NWP products into the time series InSAR workflow is developed. The efficiency of the algorithm is tested via simulated data experiments, which demonstrate the method outperforms other more conventional methods. In Chapter 3, a geophysical case study is performed by applying the developed algorithm to the active volcanoes of Unimak Island Alaska (Westdahl, Fisher and Shishaldin) for long term volcano deformation monitoring. The volcano source location at Westdahl is determined to be approx. 7 km below sea level and approx. 3.5 km north of the Westdahl peak. This study demonstrates that Fisher caldera has had continuous subsidence over more than 10 years and there is no evident deformation signal around Shishaldin peak.Chapter 1. Performance of the High Resolution Atmospheric Model HRRR-AK for Correcting Geodetic Observations from Spaceborne Radars -- Chapter 2. Robust atmospheric filtering of InSAR data based on numerical weather prediction models -- Chapter 3. Subtle motion long term monitoring of Unimak Island from 2003 to 2010 by advanced time series SAR interferometry -- Chapter 4. Conclusion and future work

Interferometric SAR signal analysis in the presence of squint

This paper develops an analysis of the SAR impulse response function from the interferometric point of view, with the intention of studying its phase behavior in the presence of high squint angle values. It will be pointed out that in this case, a phase ramp is present in the range direction, which, in combination with a certain degree of misregistration between the two images induces an offset in the generated interferometric phase. This behavior, if not compensated, imposes strong limits on the performance of the interferometric techniques in a squinted case, especially for airborne SAR systems. The article proposes two new techniques, which are appropriate to correct the phase bias coming from this source. The first one is based on a modification of the azimuth compression filter, which cancels the phase ramp of the range impulse response function for one specific squint value. In case the SAR processing is performed with variable squint over range, the authors propose a second method oriented to estimating the expected misregistration and thus, the phase bias by means of an iterative approach. Simulated data as well as real corner reflector responses are used to show that the correct topography can be recovered precisely even in the presence of phase bias coming from the squinted geometry.Peer Reviewe

Extension of Wavenumber Domain Focusing for spotlight COSMO-SkyMed SAR Data

In this work we describe a method to handle curved orbits in wavenumber domain focusing algorithm for high-resolution SAR data acquired by Low Earth Orbit satellites using spotlight mode. The stand..

An experimental synthetic aperture SONAR

Aperture synthesis is a mature technique that has been used with success in a number of remote sensing fields. Sonars can also potentially benefit from the technique, though to date the limitations of slow acoustic propagation and difficulty in maintaining a stable platform has hindered investigation. This thesis investigates aperture synthesis for high resolution underwater imaging. A prototype sonar is designed and fabricated for the study. The performance of the sonar is assessed in both tank and sea trials and the results presented in this thesis

Review of the mathematical foundations of data fusion techniques in surface metrology

The recent proliferation of engineered surfaces, including freeform and structured surfaces, is challenging current metrology techniques. Measurement using multiple sensors has been proposed to achieve enhanced benefits, mainly in terms of spatial frequency bandwidth, which a single sensor cannot provide. When using data from different sensors, a process of data fusion is required and there is much active research in this area. In this paper, current data fusion methods and applications are reviewed, with a focus on the mathematical foundations of the subject. Common research questions in the fusion of surface metrology data are raised and potential fusion algorithms are discussed

Demonstration of integrated microscale optics in surface-electrode ion traps

In ion trap quantum information processing, efficient fluorescence collection is critical for fast, high-fidelity qubit detection and ion-photon entanglement. The expected size of future many-ion processors require scalable light collection systems. We report on the development and testing of a microfabricated surface-electrode ion trap with an integrated high numerical aperture (NA) micromirror for fluorescence collection. When coupled to a low NA lens, the optical system is inherently scalable to large arrays of mirrors in a single device. We demonstrate stable trapping and transport of 40Ca+ ions over a 0.63 NA micromirror and observe a factor of 1.9 enhancement in photon collection compared to the planar region of the trap.Comment: 15 pages, 8 figure