Effective denoising and adaptive equalization of indoor optical wireless channel with artificial light using the discrete wavelet transform and artificial neural network

Indoor diffuse optical wireless (OW) communication systems performance is limited due to a number of effects; interference from natural and artificial light sources and multipath induced intersymbol interference (ISI). Artificial light interference (ALI) is a periodic signal with a spectrum profile extending up to the MHz range. It is the dominant source of performance degradation at low data rates, which can be removed using a high-pass filter (HPF). On the other hand, ISI is more severe at high data rates and an equalizing filter is incorporated at the receiver to compensate for the ISI. This paper provides the simulation results for a discrete wavelet transform (DWT)—artificial neural network (ANN)-based receiver architecture for on-and-off keying (OOK) non-return-to-zero (NRZ) scheme for a diffuse indoor OW link in the presence of ALI and ISI. ANN is adopted for classification acting as an efficient equalizer compared to the traditional equalizers. The ALI is effectively reduced by proper selection of the DWT coefficients resulting in improved receiver performance compared to the digital HPF. The simulated bit error rate (BER) performance of proposed DWT-ANN receiver structure for a diffuse indoor OW link operating at a data range of 10-200 Mbps is presented and discussed. The results are compared with performance of a diffuse link with an HPF-equalizer, ALI with/without filtering, and a line-of-sight (LOS) without filtering. We show that the DWT-ANN display a lower power requirement when compared to the receiver with an HPF-equalizer over a full range of delay spread in presence of ALI. However, as expected compared to the ideal LOS link the power penalty is higher reaching to 6 dB at 200 Mbps data rate

Fault Location in Grid Connected Ungrounded PV Systems Using Wavelets

Solar photovoltaic (PV) power has become one of the major sources of renewable energy worldwide. This thesis develops a wavelet-based fault location method for ungrounded PV farms based on pattern recognition of the high frequency transients due to switching frequencies in the system and which does not need any separate devices for fault location. The solar PV farm used for the simulation studies consists of a large number of PV modules connected to grid-connected inverters through ungrounded DC cables. Manufacturers report that about 1% of installed PV panels fail annually. Detecting phase to ground faults in ungrounded underground DC cables is also difficult and time consuming. Therefore, identifying ground faults is a significant problem in ungrounded PV systems because such earth faults do not provide sufficient fault currents for their detection and location during system operation. If such ground faults are not cleared quickly, a subsequent ground fault on the healthy phase will create a complete short-circuit in the system, which will cause a fire hazard and arc-flashing. Locating such faults with commonly used fault locators requires costly external high frequency signal generators, transducers, relays, and communication devices as well as generally longer lead times to find the fault. This thesis work proposes a novel fault location scheme that overcomes the shortcomings of the currently available methods. In this research, high frequency noise patterns are used to identify the fault location in an ungrounded PV farm. This high frequency noise is generated due to the switching transients of converters combined with parasitic capacitance of PV panels and cables. The pattern recognition approach, using discrete wavelet transform (DWT) multi-resolution analysis (MRA) and artificial neural networks (ANN), is utilized to investigate the proposed method for ungrounded grid integrated PV systems. Detailed time domain electromagnetic simulations of PV systems are done in a real-time environment and the results are analyzed to verify the performance of the fault locator. The fault locator uses a wavelet transform-based digital signal processing technique, which uses the high frequency patterns of the mid-point voltage signal of the converters to analyze the ground fault location. The Daubechies 10 (db10) wavelet and scale 11 are chosen as the appropriate mother wavelet function and decomposition level according to the characteristics of the noise waveform to give the proposed method better performance. In this study, norm values of the measured waveform at different frequency bands give unique features at different fault locations and are used as the feature vectors for pattern recognition. Then, the three-layer feed-forward ANN classifier, which can automatically classify the fault locations according to the extracted features, is investigated. The neural network is trained with the Levenberg-Marquardt back-propagation learning algorithm. The proposed fault locating scheme is tested and verified for different types of faults, such as ground and line-line faults at PV modules and cables of the ungrounded PV system. These faults are simulated in a real-time environment with a digital simulator and the data is then analyzed with wavelets in MATLAB. The test results show that the proposed method achieves 99.177% and 97.851% of fault location accuracy for different faults in DC cables and PV modules, respectively. Finally, the effectiveness and feasibility of the designed fault locator in real field applications is tested under varying fault impedance, power outputs, temperature, PV parasitic elements, and switching frequencies of the converters. The results demonstrate the proposed approach has very accurate and robust performance even with noisy measurements and changes in operating conditions

Coherent Optical OFDM Modem Employing Artificial Neural Networks for Dispersion and Nonlinearity Compensation in a Long-Haul Transmission System

In order to satisfy the ever increasing demand for the bandwidth requirement in broadband services the optical orthogonal frequency division multiplexing (OOFDM) scheme is being considered as a promising technique for future high-capacity optical networks. The aim of this thesis is to investigate, theoretically, the feasibility of implementing the coherent optical OFDM (CO-OOFDM) technique in long haul transmission networks. For CO-OOFDM and Fast-OFDM systems a set of modulation formats dependent analogue to digital converter (ADC) clipping ratio and the quantization bit have been identified, moreover, CO-OOFDM is more resilient to the chromatic dispersion (CD) when compared to the bandwidth efficient Fast-OFDM scheme. For CO-OOFDM systems numerical simulations are undertaken to investigate the effect of the number of sub-carriers, the cyclic prefix (CP), and ADC associated parameters such as the sampling speed, the clipping ratio, and the quantisation bit on the system performance over single mode fibre (SMF) links for data rates up to 80 Gb/s. The use of a large number of sub-carriers is more effective in combating the fibre CD compared to employing a long CP. Moreover, in the presence of fibre non-linearities identifying the optimum number of sub-carriers is a crucial factor in determining the modem performance. For a range of signal data rates up to 40 Gb/s, a set of data rate and transmission distance-dependent optimum ADC parameters are identified in this work. These parameters give rise to a negligible clipping and quantisation noise, moreover, ADC sampling speed can increase the dispersion tolerance while transmitting over SMF links. In addition, simulation results show that the use of adaptive modulation schemes improves the spectrum usage efficiency, thus resulting in higher tolerance to the CD when compared to the case where identical modulation formats are adopted across all sub-carriers. For a given transmission distance utilizing an artificial neural networks (ANN) equalizer improves the system bit error rate (BER) performance by a factor of 50% and 70%, respectively when considering SMF firstly CD and secondly nonlinear effects with CD. Moreover, for a fixed BER of 10-3 utilizing ANN increases the transmission distance by 1.87 times and 2 times, respectively while considering SMF CD and nonlinear effects. The proposed ANN equalizer performs more efficiently in combating SMF non-linearities than the previously published Kerr nonlinearity electrical compensation technique by a factor of 7

Application of wavelets and artificial neural network for indoor optical wireless communication systems

Abstract This study investigates the use of error control code, discrete wavelet transform (DWT) and artificial neural network (ANN) to improve the link performance of an indoor optical wireless communication in a physical channel. The key constraints that barricade the realization of unlimited bandwidth in optical wavelengths are the eye-safety issue, the ambient light interference and the multipath induced intersymbol interference (ISI). Eye-safety limits the maximum average transmitted optical power. The rational solution is to use power efficient modulation techniques. Further reduction in transmitted power can be achieved using error control coding. A mathematical analysis of retransmission scheme is investigated for variable length modulation techniques and verified using computer simulations. Though the retransmission scheme is simple to implement, the shortfall in terms of reduced throughput will limit higher code gain. Due to practical limitation, the block code cannot be applied to the variable length modulation techniques and hence the convolutional code is the only possible option. The upper bound for slot error probability of the convolutional coded dual header pulse interval modulation (DH-PIM) and digital pulse interval modulation (DPIM) schemes are calculated and verified using simulations. The power penalty due to fluorescent light interference (FL I) is very high in indoor optical channel making the optical link practically infeasible. A denoising method based on a DWT to remove the FLI from the received signal is devised. The received signal is first decomposed into different DWT levels; the FLI is then removed from the signal before reconstructing the signal. A significant reduction in the power penalty is observed using DWT. Comparative study of DWT based denoising scheme with that of the high pass filter (HPF) show that DWT not only can match the best performance obtain using a HPF, but also offers a reduced complexity and design simplicity. The high power penalty due to multipath induced ISI makes a diffuse optical link practically infeasible at higher data rates. An ANN based linear and DF architectures are investigated to compensation the ISI. Unlike the unequalized cases, the equalized schemes don‘t show infinite power penalty and a significant performance improvement is observed for all modulation schemes. The comparative studies substantiate that ANN based equalizers match the performance of the traditional equalizers for all channel conditions with a reduced training data sequence. The study of the combined effect of the FLI and ISI shows that DWT-ANN based receiver perform equally well in the present of both interference. Adaptive decoding of error control code can offer flexibility of selecting the best possible encoder in a given environment. A suboptimal ?soft‘ sliding block convolutional decoder based on the ANN and a 1/2 rate convolutional code with a constraint length is investigated. Results show that the ANN decoder can match the performance of optimal Viterbi decoder for hard decision decoding but with slightly inferior performance compared to soft decision decoding. This provides a foundation for further investigation of the ANN decoder for convolutional code with higher constraint length values. Finally, the proposed DWT-ANN receiver is practically realized in digital signal processing (DSP) board. The output from the DSP board is compared with the computer simulations and found that the difference is marginal. However, the difference in results doesn‘t affect the overall error probability and identical error probability is obtained for DSP output and computer simulations

Spatio-Temporal Reconstruction Techniques for Optical Microscopy

Optical microscopy offers the unique possibility to study living samples under conditions akin to their native state. However, the technique is not void of inherent problems such as optical blur due to light diffraction, contamination with out-of-focus light from adjacent focal planes, and spherical aberrations. Furthermore, with a dearth of techniques that are capable of imaging multiple focal sections in quick succession, the multi-dimensional capture of dynamically changing samples remains a challenge of its own. Computational techniques that use auxiliary knowledge about the imaging system and the sample to mitigate these problems are hence of great interest in optical microscopy.The first part of this thesis deals with the design of a discrete model to characterize light propagation. Following the scalar diffraction theory in optics, we propose a discrete algorithm, based on generalized sampling theory, to reverse the coherent diffraction process via back propagation. The algorithm consists of a wavelet-based model for the spherical waves emanating from the object of interest and an optimized multi-rate filtering protocol for reconstruction from the diffraction data recorded by non-ideal detectors. The second part of this thesis describes a spatial registration tool designed for multi-view microscopy. Here, the imaged sample is rotated about a lateral axis for the acquisition of multiple 3D datasets from different views in order to subsequently alleviate the severe axial blur found in each such dataset. Automatic algorithms that only rely on maximizing pixel-based similarity provide poor results in such applications owing to the anisotropic point-spread-function (PSF) of optical microscopes. We propose a pyramid-based spatial registration algorithm that re-blurs the multi-view datasets with transformed forms of the PSF in order to make them comparable, before maximizing their pixel-based similarity for registration.The third part of this thesis describes a fast converging iterative multi-view deconvolution technique that can be applied to the spatially registered forms of the 3D datasets acquired using multi-view microscopy. Our sparsity based algorithm solves a non-linear objective function to jointly deconvolve and fuse the multi-view datasets to finally produce a single deblurred 3D result that has nearly isotropic spatial resolution.The fourth part of this thesis addresses problems due to spherical aberrations encountered during the imaging of thick samples in optical microscopy. The depth-varying nature of the optical blur found in such cases renders fast and efficient shift-invariant deconvolution techniques to be inapplicable. Here, we propose a fast iterative-shrinkage-thresholding shift-variant 3D deconvolution method that uses depth-dependent PSFs to reconstruct a 3D deblurred form of the imaged thick specimen. The final part of this thesis describes a non-rigid temporal registration tool that aids in the multi-dimensional imaging of quasi-periodic processes such as cardiac cycles. We propose a variant of dynamic time warping that is capable of both temporally warping and wrapping an input sequence by allowing for jump discontinuities in the non-linear temporal alignment function akin to those found in wrapped phase functions. This work provides a new set of tools for spatio-temporal reconstruction in optical microscopy and we anticipate them to be useful for a wide range of problems in practice

Numerical Simulation

Nowadays mathematical modeling and numerical simulations play an important role in life and natural science. Numerous researchers are working in developing different methods and techniques to help understand the behavior of very complex systems, from the brain activity with real importance in medicine to the turbulent flows with important applications in physics and engineering. This book presents an overview of some models, methods, and numerical computations that are useful for the applied research scientists and mathematicians, fluid tech engineers, and postgraduate students

Medical Image Registration

Image registration of X-ray images is used to correctly align the patient before the cancer tumour is treated with sets of high dose X-ray radiation. Before the first treatment, a simulated X-ray image is taken showing the best possible localisation of the tumour. From then on, after each of the radiation treatments of the tumour, a low dose of the X-ray theurapeutic radiation is used to take an image of the tumour and its surroundings. This so called portal X-ray image is compared to the simulated image to decide whether the patient should be moved before the next treatment in order to improve the accuracy of the theurapeutic beam and, hence, prevent the high dose radiation from hitting other surrounding tissues close to the tumour. Due to differences in quality of the X-ray plates used for the recording of the simulated and the portal image, the images differ a lot in contrasts, noise level, and possibly even scale and size. The diverse quality of the images is the main problem of the image registration task. At present, the comparison of the X-ray images is carried out by hand. A software for automating the process would decrease the influence of human intuition on the treatment, decrease the treatment time, and enable less qualified personnel to carry out the treatment. Much research has already been done within the field of image registration, many with various results. The preceding pilot study suggests that a deeper study, that would go beyond the scope of this project, is needed for the task. This report strives for presenting fields of possible approaches to the problem and tests performed within these fields. Hopefully, the report will give some guidance on directions that a future research could take

Generalizable automated pixel-level structural segmentation of medical and biological data

Over the years, the rapid expansion in imaging techniques and equipments has driven the demand for more automation in handling large medical and biological data sets. A wealth of approaches have been suggested as optimal solutions for their respective imaging types. These solutions span various image resolutions, modalities and contrast (staining) mechanisms. Few approaches generalise well across multiple image types, contrasts or resolution. This thesis proposes an automated pixel-level framework that addresses 2D, 2D+t and 3D structural segmentation in a more generalizable manner, yet has enough adaptability to address a number of specific image modalities, spanning retinal funduscopy, sequential fluorescein angiography and two-photon microscopy. The pixel-level segmentation scheme involves: i ) constructing a phase-invariant orientation field of the local spatial neighbourhood; ii ) combining local feature maps with intensity-based measures in a structural patch context; iii ) using a complex supervised learning process to interpret the combination of all the elements in the patch in order to reach a classification decision. This has the advantage of transferability from retinal blood vessels in 2D to neural structures in 3D. To process the temporal components in non-standard 2D+t retinal angiography sequences, we first introduce a co-registration procedure: at the pairwise level, we combine projective RANSAC with a quadratic homography transformation to map the coordinate systems between any two frames. At the joint level, we construct a hierarchical approach in order for each individual frame to be registered to the global reference intra- and inter- sequence(s). We then take a non-training approach that searches in both the spatial neighbourhood of each pixel and the filter output across varying scales to locate and link microvascular centrelines to (sub-) pixel accuracy. In essence, this \link while extract" piece-wise segmentation approach combines the local phase-invariant orientation field information with additional local phase estimates to obtain a soft classification of the centreline (sub-) pixel locations. Unlike retinal segmentation problems where vasculature is the main focus, 3D neural segmentation requires additional exibility, allowing a variety of structures of anatomical importance yet with different geometric properties to be differentiated both from the background and against other structures. Notably, cellular structures, such as Purkinje cells, neural dendrites and interneurons, all display certain elongation along their medial axes, yet each class has a characteristic shape captured by an orientation field that distinguishes it from other structures. To take this into consideration, we introduce a 5D orientation mapping to capture these orientation properties. This mapping is incorporated into the local feature map description prior to a learning machine. Extensive performance evaluations and validation of each of the techniques presented in this thesis is carried out. For retinal fundus images, we compute Receiver Operating Characteristic (ROC) curves on existing public databases (DRIVE & STARE) to assess and compare our algorithms with other benchmark methods. For 2D+t retinal angiography sequences, we compute the error metrics ("Centreline Error") of our scheme with other benchmark methods. For microscopic cortical data stacks, we present segmentation results on both surrogate data with known ground-truth and experimental rat cerebellar cortex two-photon microscopic tissue stacks.Open Acces

Application of wavelets and artificial neural network for indoor optical wireless communication systems

This study investigates the use of error control code, discrete wavelet transform (DWT) and artificial neural network (ANN) to improve the link performance of an indoor optical wireless communication in a physical channel. The key constraints that barricade the realization of unlimited bandwidth in optical wavelengths are the eye-safety issue, the ambient light interference and the multipath induced intersymbol interference (ISI). Eye-safety limits the maximum average transmitted optical power. The rational solution is to use power efficient modulation techniques. Further reduction in transmitted power can be achieved using error control coding. A mathematical analysis of retransmission scheme is investigated for variable length modulation techniques and verified using computer simulations. Though the retransmission scheme is simple to implement, the shortfall in terms of reduced throughput will limit higher code gain. Due to practical limitation, the block code cannot be applied to the variable length modulation techniques and hence the convolutional code is the only possible option. The upper bound for slot error probability of the convolutional coded dual header pulse interval modulation (DH-PIM) and digital pulse interval modulation (DPIM) schemes are calculated and verified using simulations. The power penalty due to fluorescent light interference (FL I) is very high in indoor optical channel making the optical link practically infeasible. A denoising method based on a DWT to remove the FLI from the received signal is devised. The received signal is first decomposed into different DWT levels; the FLI is then removed from the signal before reconstructing the signal. A significant reduction in the power penalty is observed using DWT. Comparative study of DWT based denoising scheme with that of the high pass filter (HPF) show that DWT not only can match the best performance obtain using a HPF, but also offers a reduced complexity and design simplicity. The high power penalty due to multipath induced ISI makes a diffuse optical link practically infeasible at higher data rates. An ANN based linear and DF architectures are investigated to compensation the ISI. Unlike the unequalized cases, the equalized schemes don‘t show infinite power penalty and a significant performance improvement is observed for all modulation schemes. The comparative studies substantiate that ANN based equalizers match the performance of the traditional equalizers for all channel conditions with a reduced training data sequence. The study of the combined effect of the FLI and ISI shows that DWT-ANN based receiver perform equally well in the present of both interference. Adaptive decoding of error control code can offer flexibility of selecting the best possible encoder in a given environment. A suboptimal 'soft' sliding block convolutional decoder based on the ANN and a 1/2 rate convolutional code with a constraint length is investigated. Results show that the ANN decoder can match the performance of optimal Viterbi decoder for hard decision decoding but with slightly inferior performance compared to soft decision decoding. This provides a foundation for further investigation of the ANN decoder for convolutional code with higher constraint length values. Finally, the proposed DWT-ANN receiver is practically realized in digital signal processing (DSP) board. The output from the DSP board is compared with the computer simulations and found that the difference is marginal. However, the difference in results doesn‘t affect the overall error probability and identical error probability is obtained for DSP output and computer simulations.EThOS - Electronic Theses Online ServiceGBUnited Kingdo