Gait-Behavior Optimization Considering Arm Swing and Toe Mechanisms for Biped Robot on Rough Road

芝浦工業大学2019年

Current sensing feedback for humanoid stability

For humanoid robots to function in changing environments, they must be able to maintain balance similar to human beings. At present, humanoids recover from pushes by the use of either the ankles or hips and a rigid body. This method has been proven to work, but causes excessive strain on the joints of the robot and does not maximize on the capabilities of a humanlike body. The focus of this paper is to enable advanced dynamic balancing through torque classification and balance improving positional changes. For the robot to be able to balance dynamically, external torques must be determined accurately. The proposed method of this paper uses current sensing feedback at the humanoids power source to classify external torques. Through understanding the current draw of each joint, an external torque can be modeled. After being modeled, the external torque can be nullified with balancing techniques. Current sensing has the advantage that it adds detailed feedback while requiring small adjustments to the robot. Also, current sensing minimizes additional sensors, cost, and weight to the robot. Current sensing technology lies between the power supply and drive motors, thus can be implement without altering the robot. After an external torque has been modeled, the robot will undertake balancing positions to reduce the instability. The specialized positions increase the robot\u27s balance while reducing the workload of each joint. The balancing positions incorporate the humanlike body of the robot and torque from each of the leg servos. The best balancing positions were generated with a genetic algorithm and simulated in Webots. The simulation environment provided an accurate physical model and physics engine. The genetic algorithm reduced the workload of searching the workspace of a robot with ten degrees of freedom below the waist. The current sensing theory was experimentally tested on the TigerBot, a humanoid produced by the Rochester Institute of Technology (RIT). The TigerBot has twenty three degrees of freedom that fully simulate human motion. The robot stands at thirty-one inches tall and weighs close to nine pounds. The legs of the robot have six degrees of freedom per leg, which fully mimics the human leg. The robot was awarded first place in the 2012 IEEE design competition for innovation in New York

Bio-Inspired Robotics

Modern robotic technologies have enabled robots to operate in a variety of unstructured and dynamically-changing environments, in addition to traditional structured environments. Robots have, thus, become an important element in our everyday lives. One key approach to develop such intelligent and autonomous robots is to draw inspiration from biological systems. Biological structure, mechanisms, and underlying principles have the potential to provide new ideas to support the improvement of conventional robotic designs and control. Such biological principles usually originate from animal or even plant models, for robots, which can sense, think, walk, swim, crawl, jump or even fly. Thus, it is believed that these bio-inspired methods are becoming increasingly important in the face of complex applications. Bio-inspired robotics is leading to the study of innovative structures and computing with sensory–motor coordination and learning to achieve intelligence, flexibility, stability, and adaptation for emergent robotic applications, such as manipulation, learning, and control. This Special Issue invites original papers of innovative ideas and concepts, new discoveries and improvements, and novel applications and business models relevant to the selected topics of ``Bio-Inspired Robotics''. Bio-Inspired Robotics is a broad topic and an ongoing expanding field. This Special Issue collates 30 papers that address some of the important challenges and opportunities in this broad and expanding field

Visual servo control on a humanoid robot

Includes bibliographical referencesThis thesis deals with the control of a humanoid robot based on visual servoing. It seeks to confer a degree of autonomy to the robot in the achievement of tasks such as reaching a desired position, tracking or/and grasping an object. The autonomy of humanoid robots is considered as crucial for the success of the numerous services that this kind of robots can render with their ability to associate dexterity and mobility in structured, unstructured or even hazardous environments. To achieve this objective, a humanoid robot is fully modeled and the control of its locomotion, conditioned by postural balance and gait stability, is studied. The presented approach is formulated to account for all the joints of the biped robot. As a way to conform the reference commands from visual servoing to the discrete locomotion mode of the robot, this study exploits a reactive omnidirectional walking pattern generator and a visual task Jacobian redefined with respect to a floating base on the humanoid robot, instead of the stance foot. The redundancy problem stemming from the high number of degrees of freedom coupled with the omnidirectional mobility of the robot is handled within the task priority framework, allowing thus to achieve con- figuration dependent sub-objectives such as improving the reachability, the manipulability and avoiding joint limits. Beyond a kinematic formulation of visual servoing, this thesis explores a dynamic visual approach and proposes two new visual servoing laws. Lyapunov theory is used first to prove the stability and convergence of the visual closed loop, then to derive a robust adaptive controller for the combined robot-vision dynamics, yielding thus an ultimate uniform bounded solution. Finally, all proposed schemes are validated in simulation and experimentally on the humanoid robot NAO

Using Model-based Optimal Control for Conceptional Motion Generation for the Humannoid Robot HRP-2 14 and Design Investigations for Exo-Skeletons

The research field of bipedal locomotion has been active since a few decades now. At one hand, the legged locomotion principle comprises highly flexible and robust mobility for technical applications. At the other hand, a thorough technical understanding of bipedalism supports efforts of clinicians and engineers to help people, suffering from reduced locomotion capabilities caused by fatal incidents. Since the technology enabled the construction of numerous robotic devices, among them: various humanoids, researchers started to investigate bipedalism by abstraction and adoption for technical applications. Findings from humanoid robotics are further exploited for the construction of devices for human performance augmentation and mobility support or gait rehabilitation, among them: orthosis and exo-skeletons. Although this research continuously progresses, the motion capacities of humanoid robots still lack far behind those of humans in terms of forward velocity, robustness and appearance of the overall motion. Generally, it is claimed that the difference of performance between humans and robotics is not only due to the limiting characteristics of the employed technology, e.g. constructive lack of specific determinants of gait for bipedalism or dynamic limits of the actuation system, but as well to the adopted methods for motion generation and control. For humanoid robotics, methods for motion generation are classified into optimization-based methods and those that employ heuristics, that are mostly distinguished based on the problem complexity (computation time) and the resulting dynamic error between the generated motion and the dynamics of the real robot. The implementation of the dynamic motion on the robotic platform is usually comprised with an on-line stabilizing control system. This control system must then identify and resolve instantaneously the dynamic error to maintain a continuously stable operation of the device. A large dynamic error and breach of the dynamic limits of the actuation system can quickly lead to a fatal destabilization of the device. This work proposes a contribution to the model computation and the strategy of the problem formulation of direct multiple-shooting based optimal control (Bock et. al.) for dynamically stable optimization-based motion generation. The computation of the whole-body dynamic model inside the optimization relies either on forward or inverse dynamics approach. As the inverse dynamics approach has frequently been perceived as less resource intensive than the forward dynamics approach, a new generic algorithm for insufficiently constrained, under-actuated dynamic systems has been developed and thoroughly tested to comply with all numerical restrictions of the enveloping optimization algorithm. Based on this contribution, various optimal control problems for the humanoid platform HRP-2 14 have been formulated to assess the influence of different biologically inspired optimization criteria on the final motion characteristics of walking motions. From thorough bibliographic researches a dynamically more accurate model was comprised, by taking into account the impact absorbing element in the ankle joint complex. Based on the experiences of the previous study, a problem formulation for the limiting case of, dynamically overstepping an obstacle of 20cm x 11cm (height x width) with only two steps, while maintaining its stable operation was accomplished. This is a new record for this platform. In a further part, this work proposes an iterative comprehensive model-based optimal control approach for the conception of a lower limb exo-skeleton that respects the integrated nature of such a mechatronic device. In this contribution, a human effectively wearing such a lower limb exo-skeleton is modeled. The approach then substantiates all system components in an iterative procedure, based on the complete system model, effectively resolving all complex inter-dependencies between the different components of the system. The study in this work is conducted on an important benchmark motion, walking, of a healthy human being. From this study the limiting characteristics of the system are determined and substantial propositions to the realization of various system components are formulated