373 research outputs found
LTE uplink MIMO receiver with low complexity interference cancellation
In LTE/LTE-A uplink receiver, frequency
domain equalizers (FDE) are adopted to achieve good
performance. However, in multi-tap channels, the residual
inter-symbol and inter-antenna interference still exist after
FDE and degrade the performance. Conventional interference
cancellation schemes can minimize this interference
by using frequency domain interference cancellation.
However, those schemes have high complexity and large
feedback latency, especially when adopting a large number
of iterations. These result in low throughput and require a
large amount of resource in software defined radio implementation.
In this paper, we propose a novel low complexity
interference cancellation scheme to minimize the
residual interference in LTE/LTE-A uplink. Our proposed
scheme can bring about 2 dB gains in different channels,
but only adds up to 7.2 % complexity to the receiver. The
scheme is further implemented on Xilinx FPGA. Compared
to other conventional interference cancellation schemes,
our scheme has less complexity, less data to store, and
shorter feedback latency.Renesas MobileTexas IntrumentsXilinxSamsungHuaweiNational Science Foundation (NSF
RS Codes for Downlink LTE System over LTE-MIMO Channel
Nowdays, different applications require a modern generation of mobile communication systems; long term evolution (LTE) is a candidate to achieve this purpose. One important challenge in wireless communications, including LTE systems, is the suitable techniques of controlling errors that degrade system performance in transmission systems over multipath fading channels. Different forward Error correction (FEC) techniqes are required to improve the robustness of transmission channels. In this paper, Reed-Solomon (RS) codes were used with a downlink LTE system over a LTE-MIMO channel. This research contributes by combining RS codes that have low decoding complexity (by using hard decision decoding) with a LTE-MIMO channel to improve downlink LTE system performance. The results show that using RS codes clearly improves LTE system performance and thus decreases Bit Error Rates (BER) more than convolutional and turbo codes which have high decoding complexity. Lastly, the results show also extra improvements of downlink LTE system performance by increasing the number of antennas of the LTE-MIMO channel
Low-power Physical-layer Design for LTE Based Very NarrowBand IoT (VNB - IoT) Communication
abstract: With the new age Internet of Things (IoT) revolution, there is a need to connect a wide range of devices with varying throughput and performance requirements. In this thesis, a wireless system is proposed which is targeted towards very low power, delay insensitive IoT applications with low throughput requirements. The low cost receivers for such devices will have very low complexity, consume very less power and hence will run for several years.
Long Term Evolution (LTE) is a standard developed and administered by 3rd Generation Partnership Project (3GPP) for high speed wireless communications for mobile devices. As a part of Release 13, another standard called narrowband IoT (NB-IoT) was introduced by 3GPP to serve the needs of IoT applications with low throughput requirements. Working along similar lines, this thesis proposes yet another LTE based solution called very narrowband IoT (VNB-IoT), which further reduces the complexity and power consumption of the user equipment (UE) while maintaining the base station (BS) architecture as defined in NB-IoT.
In the downlink operation, the transmitter of the proposed system uses the NB-IoT resource block with each subcarrier modulated with data symbols intended for a different user. On the receiver side, each UE locks to a particular subcarrier frequency instead of the entire resource block and operates as a single carrier receiver. On the uplink, the system uses a single-tone transmission as specified in the NB-IoT standard.
Performance of the proposed system is analyzed in an additive white Gaussian noise (AWGN) channel followed by an analysis of the inter carrier interference (ICI). Relationship between the overall filter bandwidth and ICI is established towards the end.Dissertation/ThesisMasters Thesis Electrical Engineering 201
Digital signal processing waveform aggregation and its experimental demonstration for next generation mobile fronthaul
L'abstract è presente nell'allegato / the abstract is in the attachmen
Review of Recent Trends
This work was partially supported by the European Regional Development Fund (FEDER), through the Regional Operational Programme of Centre (CENTRO 2020) of the Portugal 2020 framework, through projects SOCA (CENTRO-01-0145-FEDER-000010) and ORCIP (CENTRO-01-0145-FEDER-022141). Fernando P. Guiomar acknowledges a fellowship from “la Caixa” Foundation (ID100010434), code LCF/BQ/PR20/11770015. Houda Harkat acknowledges the financial support of the Programmatic Financing of the CTS R&D Unit (UIDP/00066/2020).MIMO-OFDM is a key technology and a strong candidate for 5G telecommunication systems. In the literature, there is no convenient survey study that rounds up all the necessary points to be investigated concerning such systems. The current deeper review paper inspects and interprets the state of the art and addresses several research axes related to MIMO-OFDM systems. Two topics have received special attention: MIMO waveforms and MIMO-OFDM channel estimation. The existing MIMO hardware and software innovations, in addition to the MIMO-OFDM equalization techniques, are discussed concisely. In the literature, only a few authors have discussed the MIMO channel estimation and modeling problems for a variety of MIMO systems. However, to the best of our knowledge, there has been until now no review paper specifically discussing the recent works concerning channel estimation and the equalization process for MIMO-OFDM systems. Hence, the current work focuses on analyzing the recently used algorithms in the field, which could be a rich reference for researchers. Moreover, some research perspectives are identified.publishersversionpublishe
A Link Level Simulation Framework for Machine Type Communication towards 5G
5G is currently in the initial phase of standardization and many aspects of the physical layer are yet to be decided, particularly related to Machine Type Communication (MTC). A flexible simulation framework that can easily adapt to the latest standardization developments is thus a valuable tool. Building upon the 3gpp release 13 specifications for MTC, the proposal is to build a link level simulation framework in Matlab allowing for quick prototyping of ideas and concepts towards 5G
Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years
Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
- …