Challenges and Requirements for Introducing Impairment-awareness into the Management and Control Planes of ASON/GMPLS WDM Networks

The absence of electrical regenerators in transparent WDM networks significantly contributes to reduce the overall network cost. In transparent WDM networks, a proper resource allocation requires that the presence of physical impairments in Routing and Wavelength Assignment (RWA) and lightpath provisioning be taken into account. In this article a centralized, a hybrid centralized-distributed and two distributed approaches that integrate information about most relevant physical impairments in RWA and lightpath provisioning are presented and assessed. Both centralized and hybrid approaches perform a centralized path computation at the management-plane level, utilizing physical impairment information, while the lightpath provisioning is done by the management plane or the control plane, respectively. The distributed approaches fall entirely within the scope of the ASON/GMPLS control plane. For these two approaches, we provide functional requirements, architectural functional blocks, and protocol extensions for implementing either an impairment-aware real-time RWA, or a lighpath provisioning based on impairment-aware signaling

A Survey on the Path Computation Element (PCE) Architecture

Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits

IDEALIST control and service management solutions for dynamic and adaptive flexi-grid DWDM networks

Wavelength Switched Optical Networks (WSON) were designed with the premise that all channels in a network have the same spectrum needs, based on the ITU-T DWDM grid. However, this rigid grid-based approach is not adapted to the spectrum requirements of the signals that are best candidates for long-reach transmission and high-speed data rates of 400Gbps and beyond. An innovative approach is to evolve the fixed DWDM grid to a flexible grid, in which the optical spectrum is partitioned into fixed-sized spectrum slices. This allows facilitating the required amount of optical bandwidth and spectrum for an elastic optical connection to be dynamically and adaptively allocated by assigning the necessary number of slices of spectrum. The ICT IDEALIST project will provide the architectural design, protocol specification, implementation, evaluation and standardization of a control plane and a network and service management system. This architecture and tools are necessary to introduce dynamicity, elasticity and adaptation in flexi-grid DWDM networks. This paper provides an overview of the objectives, framework, functional requirements and use cases of the elastic control plane and the adaptive network and service management system targeted in the ICT IDEALIST project

Experimental comparison of impairment-aware RWA algorithms in a GMPLS-controlled dynamic optical network

The European research project DICONET proposed and implemented a multi-plane impairment-aware solution for flexible, robust and cost-effective core optical networks. The vision of DICONET was realized via a set of cross-layer optimization algorithms designed to serve the network during planning and operation. The cross-layer modules were incorporated in a common software platform forming a planning and operation tool that takes into account physical-layer impairments in the decision making. The overall solution relies on a GMPLS-based control plane that was extended to disseminate the physical layer information required by the cross-layer modules. One of the key activities in DICONET concerns the routing and wavelength assignment of traffic demands that arrive dynamically during the network operation. Identifying the important role of dynamic lightpath provisioning, in this work we focused on the performance of routing algorithms in dynamic optical networks. We tested the suitability and performance of two different online IA-RWA algorithms in a 14-node experimental test-bed that employed centralized control-plane architecture under the same network and traffic conditions. The parameters used to evaluate the two routing engines included the lightpath setup time and the blocking ratio in a traffic scenario where connections arrive and depart from the network dynamically. Results for different traffic loads showed that optimum impairment-aware decisions are made at the expense of higher lightpath setup times.Postprint (published version