6,739 research outputs found
A Multi-hop Topology Control Based on Inter-node Range Measurement for Wireless Sensor Networks Node Localization
In centralized range-based localization techniques, sufficiency of inter-node range information received by the base station strongly affects node position estimation results. Successful data aggregation is influenced by link stability of each connection of routes, especially in a multi-hop topology model. In general, measuring the inter-node range is only performed for position determination purposes. This research introduces the use of inter-node range measurement information for link selection in a multi-hop route composition in order to increase the rate of data aggregation. Due to irregularity problems of wireless media, two areas of node communication have been considered. The regular communication area is the area in which other nodes are able to perform symmetrical communication to the node without failure. The irregular area is the area in which other nodes are seldom able to communicate. Due to its instability, some existing methods tried to avoid the irregular area completely. The proposed method, named Virtual Boundaries (VBs) prioritizes these areas. The regular communication area’s nodes have high priority to be selected as link vertices; however, when there is no link candidate inside this area, nodes within the irregular area will be selected with respect to their range to the parent node. This technique resulted in a more robust multi-hop topology that can reduce isolated node numbers and increase the percentage of data collected by the base station accordingly
Device-Aware Routing and Scheduling in Multi-Hop Device-to-Device Networks
The dramatic increase in data and connectivity demand, in addition to
heterogeneous device capabilities, poses a challenge for future wireless
networks. One of the promising solutions is Device-to-Device (D2D) networking.
D2D networking, advocating the idea of connecting two or more devices directly
without traversing the core network, is promising to address the increasing
data and connectivity demand. In this paper, we consider D2D networks, where
devices with heterogeneous capabilities including computing power, energy
limitations, and incentives participate in D2D activities heterogeneously. We
develop (i) a device-aware routing and scheduling algorithm (DARS) by taking
into account device capabilities, and (ii) a multi-hop D2D testbed using
Android-based smartphones and tablets by exploiting Wi-Fi Direct and legacy
Wi-Fi connections. We show that DARS significantly improves throughput in our
testbed as compared to state-of-the-art
On the Experimental Evaluation of Vehicular Networks: Issues, Requirements and Methodology Applied to a Real Use Case
One of the most challenging fields in vehicular communications has been the
experimental assessment of protocols and novel technologies. Researchers
usually tend to simulate vehicular scenarios and/or partially validate new
contributions in the area by using constrained testbeds and carrying out minor
tests. In this line, the present work reviews the issues that pioneers in the
area of vehicular communications and, in general, in telematics, have to deal
with if they want to perform a good evaluation campaign by real testing. The
key needs for a good experimental evaluation is the use of proper software
tools for gathering testing data, post-processing and generating relevant
figures of merit and, finally, properly showing the most important results. For
this reason, a key contribution of this paper is the presentation of an
evaluation environment called AnaVANET, which covers the previous needs. By
using this tool and presenting a reference case of study, a generic testing
methodology is described and applied. This way, the usage of the IPv6 protocol
over a vehicle-to-vehicle routing protocol, and supporting IETF-based network
mobility, is tested at the same time the main features of the AnaVANET system
are presented. This work contributes in laying the foundations for a proper
experimental evaluation of vehicular networks and will be useful for many
researchers in the area.Comment: in EAI Endorsed Transactions on Industrial Networks and Intelligent
Systems, 201
Self-Synchronization in Duty-cycled Internet of Things (IoT) Applications
In recent years, the networks of low-power devices have gained popularity.
Typically these devices are wireless and interact to form large networks such
as the Machine to Machine (M2M) networks, Internet of Things (IoT), Wearable
Computing, and Wireless Sensor Networks. The collaboration among these devices
is a key to achieving the full potential of these networks. A major problem in
this field is to guarantee robust communication between elements while keeping
the whole network energy efficient. In this paper, we introduce an extended and
improved emergent broadcast slot (EBS) scheme, which facilitates collaboration
for robust communication and is energy efficient. In the EBS, nodes
communication unit remains in sleeping mode and are awake just to communicate.
The EBS scheme is fully decentralized, that is, nodes coordinate their wake-up
window in partially overlapped manner within each duty-cycle to avoid message
collisions. We show the theoretical convergence behavior of the scheme, which
is confirmed through real test-bed experimentation.Comment: 12 Pages, 11 Figures, Journa
Radio Co-location Aware Channel Assignments for Interference Mitigation in Wireless Mesh Networks
Designing high performance channel assignment schemes to harness the
potential of multi-radio multi-channel deployments in wireless mesh networks
(WMNs) is an active research domain. A pragmatic channel assignment approach
strives to maximize network capacity by restraining the endemic interference
and mitigating its adverse impact on network performance. Interference
prevalent in WMNs is multi-faceted, radio co-location interference (RCI) being
a crucial aspect that is seldom addressed in research endeavors. In this
effort, we propose a set of intelligent channel assignment algorithms, which
focus primarily on alleviating the RCI. These graph theoretic schemes are
structurally inspired by the spatio-statistical characteristics of
interference. We present the theoretical design foundations for each of the
proposed algorithms, and demonstrate their potential to significantly enhance
network capacity in comparison to some well-known existing schemes. We also
demonstrate the adverse impact of radio co- location interference on the
network, and the efficacy of the proposed schemes in successfully mitigating
it. The experimental results to validate the proposed theoretical notions were
obtained by running an exhaustive set of ns-3 simulations in IEEE 802.11g/n
environments.Comment: Accepted @ ICACCI-201
Small Worlds: Strong Clustering in Wireless Networks
Small-worlds represent efficient communication networks that obey two
distinguishing characteristics: a high clustering coefficient together with a
small characteristic path length. This paper focuses on an interesting paradox,
that removing links in a network can increase the overall clustering
coefficient. Reckful Roaming, as introduced in this paper, is a 2-localized
algorithm that takes advantage of this paradox in order to selectively remove
superfluous links, this way optimizing the clustering coefficient while still
retaining a sufficiently small characteristic path length.Comment: To appear in: 1st International Workshop on Localized Algorithms and
Protocols for Wireless Sensor Networks (LOCALGOS 2007), 2007, IEEE Compuster
Society Pres
Information Centric Networking in the IoT: Experiments with NDN in the Wild
This paper explores the feasibility, advantages, and challenges of an
ICN-based approach in the Internet of Things. We report on the first NDN
experiments in a life-size IoT deployment, spread over tens of rooms on several
floors of a building. Based on the insights gained with these experiments, the
paper analyses the shortcomings of CCN applied to IoT. Several interoperable
CCN enhancements are then proposed and evaluated. We significantly decreased
control traffic (i.e., interest messages) and leverage data path and caching to
match IoT requirements in terms of energy and bandwidth constraints. Our
optimizations increase content availability in case of IoT nodes with
intermittent activity. This paper also provides the first experimental
comparison of CCN with the common IoT standards 6LoWPAN/RPL/UDP.Comment: 10 pages, 10 figures and tables, ACM ICN-2014 conferenc
- …