Caracterización y optimización térmica de sistemas en chip mediante emulación con FPGAs

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadores y Automática, leída el 15/06/2012Tablets and smartphones are some of the many intelligent devices that dominate the consumer electronics market. These systems are complex to design as they must execute multiple applications (e.g.: real-time video processing, 3D games, or wireless communications), while meeting additional design constraints, such as low energy consumption, reduced implementation size and, of course, a short time-to-market. Internally, they rely on Multi-processor Systems on Chip (MPSoCs) as their main processing cores, to meet the tight design constraints: performance, size, power consumption, etc. In a bad design, the high logic density may generate hotspots that compromise the chip reliability. This thesis introduces a FPGA-based emulation framework for easy exploration of SoC design alternatives. It provides fast and accurate estimations of performance, power, temperature, and reliability in one unified flow, to help designers tune their system architecture before going to silicon.El estado del arte, en lo que a diseño de chips para empotrados se refiere, se encuentra dominado por los multi-procesadores en chip, o MPSoCs. Son complejos de diseñar y presentan problemas de disipación de potencia, de temperatura, y de fiabilidad. En este contexto, esta tesis propone una nueva plataforma de emulación para facilitar la exploración del enorme espacio de diseño. La plataforma utiliza una FPGA de propósito general para acelerar la emulación, lo cual le da una ventaja competitiva frente a los simuladores arquitectónicos software, que son mucho más lentos. Los datos obtenidos de la ejecución en la FPGA son enviados a un PC que contiene bibliotecas (modelos) SW para calcular el comportamiento (e.g.: la temperatura, el rendimiento, etc...) que tendría el chip final. La parte experimental está enfocada a dos puntos: por un lado, a verificar que el sistema funciona correctamente y, por otro, a demostrar la utilidad del entorno para realizar exploraciones que muestren los efectos a largo plazo que suceden dentro del chip, como puede ser la evolución de la temperatura, que es un fenómeno lento que normalmente requiere de costosas simulaciones software.Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

A comprehensive approach to MPSoC security: achieving network-on-chip security : a hierarchical, multi-agent approach

Multiprocessor Systems-on-Chip (MPSoCs) are pervading our lives, acquiring ever increasing relevance in a large number of applications, including even safety-critical ones. MPSoCs, are becoming increasingly complex and heterogeneous; the Networks on Chip (NoC paradigm has been introduced to support scalable on-chip communication, and (in some cases) even with reconfigurability support. The increased complexity as well as the networking approach in turn make security aspects more critical. In this work we propose and implement a hierarchical multi-agent approach providing solutions to secure NoC based MPSoCs at different levels of design. We develop a flexible, scalable and modular structure that integrates protection of different elements in the MPSoC (e.g. memory, processors) from different attack scenarios. Rather than focusing on protection strategies specifically devised for an individual attack or a particular core, this work aims at providing a comprehensive, system-level protection strategy: this constitutes its main methodological contribution. We prove feasibility of the concepts via prototype realization in FPGA technology

HW-SW Emulation Framework for Temperature-Aware Design in MPSoCs

New tendencies envisage Multi-Processor Systems-On-Chip (MPSoCs) as a promising solution for the consumer electronics market. MPSoCs are complex to design, as they must execute multiple applications (games, video), while meeting additional design constraints (energy consumption, time-to-market). Moreover, the rise of temperature in the die for MPSoCs can seriously affect their final performance and reliability. In this paper, we present a new hardware-software emulation framework that allows designers a complete exploration of the thermal behavior of final MPSoC designs early in the design flow. The proposed framework uses FPGA emulation as the key element to model the hardware components of the considered MPSoC platform at multi-megahertz speeds. It automatically extracts detailed system statistics that are used as input to our software thermal library running in a host computer. This library calculates at run-time the temperature of on-chip components, based on the collected statistics from the emulated system and the final floorplan of the MPSoC. This enables fast testing of various thermal management techniques. Our results show speed-ups of three orders of magnitude compared to cycle-accurate MPSoC simulator

Design and Programming Methods for Reconfigurable Multi-Core Architectures using a Network-on-Chip-Centric Approach

A current trend in the semiconductor industry is the use of Multi-Processor Systems-on-Chip (MPSoCs) for a wide variety of applications such as image processing, automotive, multimedia, and robotic systems. Most applications gain performance advantages by executing parallel tasks on multiple processors due to the inherent parallelism. Moreover, heterogeneous structures provide high performance/energy efficiency, since application-specific processing elements (PEs) can be exploited. The increasing number of heterogeneous PEs leads to challenging communication requirements. To overcome this challenge, Networks-on-Chip (NoCs) have emerged as scalable on-chip interconnect. Nevertheless, NoCs have to deal with many design parameters such as virtual channels, routing algorithms and buffering techniques to fulfill the system requirements. This thesis highly contributes to the state-of-the-art of FPGA-based MPSoCs and NoCs. In the following, the three major contributions are introduced. As a first major contribution, a novel router concept is presented that efficiently utilizes communication times by performing sequences of arithmetic operations on the data that is transferred. The internal input buffers of the routers are exchanged with processing units that are capable of executing operations. Two different architectures of such processing units are presented. The first architecture provides multiply and accumulate operations which are often used in signal processing applications. The second architecture introduced as Application-Specific Instruction Set Routers (ASIRs) contains a processing unit capable of executing any operation and hence, it is not limited to multiply and accumulate operations. An internal processing core located in ASIRs can be developed in C/C++ using high-level synthesis. The second major contribution comprises application and performance explorations of the novel router concept. Models that approximate the achievable speedup and the end-to-end latency of ASIRs are derived and discussed to show the benefits in terms of performance. Furthermore, two applications using an ASIR-based MPSoC are implemented and evaluated on a Xilinx Zynq SoC. The first application is an image processing algorithm consisting of a Sobel filter, an RGB-to-Grayscale conversion, and a threshold operation. The second application is a system that helps visually impaired people by navigating them through unknown indoor environments. A Light Detection and Ranging (LIDAR) sensor scans the environment, while Inertial Measurement Units (IMUs) measure the orientation of the user to generate an audio signal that makes the distance as well as the orientation of obstacles audible. This application consists of multiple parallel tasks that are mapped to an ASIR-based MPSoC. Both applications show the performance advantages of ASIRs compared to a conventional NoC-based MPSoC. Furthermore, dynamic partial reconfiguration in terms of relocation and security aspects are investigated. The third major contribution refers to development and programming methodologies of NoC-based MPSoCs. A software-defined approach is presented that combines the design and programming of heterogeneous MPSoCs. In addition, a Kahn-Process-Network (KPN) –based model is designed to describe parallel applications for MPSoCs using ASIRs. The KPN-based model is extended to support not only the mapping of tasks to NoC-based MPSoCs but also the mapping to ASIR-based MPSoCs. A static mapping methodology is presented that assigns tasks to ASIRs and processors for a given KPN-model. The impact of external hardware components such as sensors, actuators and accelerators connected to the processors is also discussed which makes the approach of high interest for embedded systems

Co-simulation techniques based on virtual platforms for SoC design and verification in power electronics applications

En las últimas décadas, la inversión en el ámbito energético ha aumentado considerablemente. Actualmente, existen numerosas empresas que están desarrollando equipos como convertidores de potencia o máquinas eléctricas con sistemas de control de última generación. La tendencia actual es usar System-on-chips y Field Programmable Gate Arrays para implementar todo el sistema de control. Estos dispositivos facilitan el uso de algoritmos de control más complejos y eficientes, mejorando la eficiencia de los equipos y habilitando la integración de los sistemas renovables en la red eléctrica. Sin embargo, la complejidad de los sistemas de control también ha aumentado considerablemente y con ello la dificultad de su verificación. Los sistemas Hardware-in-the-loop (HIL) se han presentado como una solución para la verificación no destructiva de los equipos energéticos, evitando accidentes y pruebas de alto coste en bancos de ensayo. Los sistemas HIL simulan en tiempo real el comportamiento de la planta de potencia y su interfaz para realizar las pruebas con la placa de control en un entorno seguro. Esta tesis se centra en mejorar el proceso de verificación de los sistemas de control en aplicaciones de electrónica potencia. La contribución general es proporcionar una alternativa a al uso de los HIL para la verificación del hardware/software de la tarjeta de control. La alternativa se basa en la técnica de Software-in-the-loop (SIL) y trata de superar o abordar las limitaciones encontradas hasta la fecha en el SIL. Para mejorar las cualidades de SIL se ha desarrollado una herramienta software denominada COSIL que permite co-simular la implementación e integración final del sistema de control, sea software (CPU), hardware (FPGA) o una mezcla de software y hardware, al mismo tiempo que su interacción con la planta de potencia. Dicha plataforma puede trabajar en múltiples niveles de abstracción e incluye soporte para realizar co-simulación mixtas en distintos lenguajes como C o VHDL. A lo largo de la tesis se hace hincapié en mejorar una de las limitaciones de SIL, su baja velocidad de simulación. Se proponen diferentes soluciones como el uso de emuladores software, distintos niveles de abstracción del software y hardware, o relojes locales en los módulos de la FPGA. En especial se aporta un mecanismo de sincronizaron externa para el emulador software QEMU habilitando su emulación multi-core. Esta aportación habilita el uso de QEMU en plataformas virtuales de co-simulacion como COSIL. Toda la plataforma COSIL, incluido el uso de QEMU, se ha analizado bajo diferentes tipos de aplicaciones y bajo un proyecto industrial real. Su uso ha sido crítico para desarrollar y verificar el software y hardware del sistema de control de un convertidor de 400 kVA

Enabling Shared Memory Communication in Networks of MPSoCs

Ongoing transistor scaling and the growing complexity of embedded system designs has led to the rise of MPSoCs (Multi‐Processor System‐on‐Chip), combining multiple hard‐core CPUs and accelerators (FPGA, GPU) on the same physical die. These devices are of great interest to the supercomputing community, who are increasingly reliant on heterogeneity to achieve power and performance goals in these closing stages of the race to exascale. In this paper, we present a network interface architecture and networking infrastructure, designed to sit inside the FPGA fabric of a cutting‐edge MPSoC device, enabling networks of these devices to communicate within both a distributed and shared memory context, with reduced need for costly software networking system calls. We will present our implementation and prototype system and discuss the main design decisions relevant to the use of the Xilinx Zynq Ultrascale+, a state‐of‐the‐art MPSoC, and the challenges to be overcome given the device's limitations and constraints. We demonstrate the working prototype system connecting two MPSoCs, with communication between processor and remote memory region and accelerator. We then discuss the limitations of the current implementation and highlight areas of improvement to make this solution production‐ready

Automated Debugging Methodology for FPGA-based Systems

Electronic devices make up a vital part of our lives. These are seen from mobiles, laptops, computers, home automation, etc. to name a few. The modern designs constitute billions of transistors. However, with this evolution, ensuring that the devices fulfill the designer’s expectation under variable conditions has also become a great challenge. This requires a lot of design time and effort. Whenever an error is encountered, the process is re-started. Hence, it is desired to minimize the number of spins required to achieve an error-free product, as each spin results in loss of time and effort. Software-based simulation systems present the main technique to ensure the verification of the design before fabrication. However, few design errors (bugs) are likely to escape the simulation process. Such bugs subsequently appear during the post-silicon phase. Finding such bugs is time-consuming due to inherent invisibility of the hardware. Instead of software simulation of the design in the pre-silicon phase, post-silicon techniques permit the designers to verify the functionality through the physical implementations of the design. The main benefit of the methodology is that the implemented design in the post-silicon phase runs many order-of-magnitude faster than its counterpart in pre-silicon. This allows the designers to validate their design more exhaustively. This thesis presents five main contributions to enable a fast and automated debugging solution for reconfigurable hardware. During the research work, we used an obstacle avoidance system for robotic vehicles as a use case to illustrate how to apply the proposed debugging solution in practical environments. The first contribution presents a debugging system capable of providing a lossless trace of debugging data which permits a cycle-accurate replay. This methodology ensures capturing permanent as well as intermittent errors in the implemented design. The contribution also describes a solution to enhance hardware observability. It is proposed to utilize processor-configurable concentration networks, employ debug data compression to transmit the data more efficiently, and partially reconfiguring the debugging system at run-time to save the time required for design re-compilation as well as preserve the timing closure. The second contribution presents a solution for communication-centric designs. Furthermore, solutions for designs with multi-clock domains are also discussed. The third contribution presents a priority-based signal selection methodology to identify the signals which can be more helpful during the debugging process. A connectivity generation tool is also presented which can map the identified signals to the debugging system. The fourth contribution presents an automated error detection solution which can help in capturing the permanent as well as intermittent errors without continuous monitoring of debugging data. The proposed solution works for designs even in the absence of golden reference. The fifth contribution proposes to use artificial intelligence for post-silicon debugging. We presented a novel idea of using a recurrent neural network for debugging when a golden reference is present for training the network. Furthermore, the idea was also extended to designs where golden reference is not present

Fault-tolerant satellite computing with modern semiconductors

Miniaturized satellites enable a variety space missions which were in the past infeasible, impractical or uneconomical with traditionally-designed heavier spacecraft. Especially CubeSats can be launched and manufactured rapidly at low cost from commercial components, even in academic environments. However, due to their low reliability and brief lifetime, they are usually not considered suitable for life- and safety-critical services, complex multi-phased solar-system-exploration missions, and missions with a longer duration. Commercial electronics are key to satellite miniaturization, but also responsible for their low reliability: Until 2019, there existed no reliable or fault-tolerant computer architectures suitable for very small satellites. To overcome this deficit, a novel on-board-computer architecture is described in this thesis.Robustness is assured without resorting to radiation hardening, but through software measures implemented within a robust-by-design multiprocessor-system-on-chip. This fault-tolerant architecture is component-wise simple and can dynamically adapt to changing performance requirements throughout a mission. It can support graceful aging by exploiting FPGA-reconfiguration and mixed-criticality.  Experimentally, we achieve 1.94W power consumption at 300Mhz with a Xilinx Kintex Ultrascale+ proof-of-concept, which is well within the powerbudget range of current 2U CubeSats. To our knowledge, this is the first COTS-based, reproducible on-board-computer architecture that can offer strong fault coverage even for small CubeSats.European Space AgencyComputer Systems, Imagery and Medi