Isolating SDN Control Traffic with Layer-2 Slicing in 6TiSCH Industrial IoT Networks

Recent standardization efforts in IEEE 802.15.4-2015 Time Scheduled Channel Hopping (TSCH) and the IETF 6TiSCH Working Group (WG), aim to provide deterministic communications and efficient allocation of resources across constrained Internet of Things (IoT) networks, particularly in Industrial IoT (IIoT) scenarios. Within 6TiSCH, Software Defined Networking (SDN) has been identified as means of providing centralized control in a number of key situations. However, implementing a centralized SDN architecture in a Low Power and Lossy Network (LLN) faces considerable challenges: not only is controller traffic subject to jitter due to unreliable links and network contention, but the overhead generated by SDN can severely affect the performance of other traffic. This paper proposes using 6TiSCH tracks, a Layer-2 slicing mechanism for creating dedicated forwarding paths across TSCH networks, in order to isolate the SDN control overhead. Not only does this prevent control traffic from affecting the performance of other data flows, but the properties of 6TiSCH tracks allows deterministic, low-latency SDN controller communication. Using our own lightweight SDN implementation for Contiki OS, we firstly demonstrate the effect of SDN control traffic on application data flows across a 6TiSCH network. We then show that by slicing the network through the allocation of dedicated resources along a SDN control path, tracks provide an effective means of mitigating the cost of SDN control overhead in IEEE 802.15.4-2015 TSCH networks

A distributed delay-efficient data aggregation scheduling for duty-cycled WSNs

With the growing interest in wireless sensor networks (WSNs), minimizing network delay and maximizing sensor (node) lifetime are important challenges. Since the sensor battery is one of the most precious resources in a WSN, efficient utilization of the energy to prolong the network lifetime has been the focus of much of the research on WSNs. For that reason, many previous research efforts have tried to achieve tradeoffs in terms of network delay and energy cost for such data aggregation tasks. Recently, duty-cycling technique, i.e., periodically switching ON and OFF communication and sensing capabilities, has been considered to significantly reduce the active time of sensor nodes and thus extend network lifetime. However, this technique causes challenges for data aggregation. In this paper, we present a distributed approach, named distributed delay efficient data aggregation scheduling (DEDAS-D) to solve the aggregation-scheduling problem in duty-cycled WSNs. The analysis indicates that our solution is a better approach to solve this problem. We conduct extensive simulations to corroborate our analysis and show that DEDAS-D outperforms other distributed schemes and achieves an asymptotic performance compared with centralized scheme in terms of data aggregation delay.N/

Alternate marking-based network telemetry for industrial WSNs

For continuous, persistent and problem-free operation of Industrial Wireless Sensor Networks (IWSN), it is critical to have visibility and awareness into what is happening on the network at any one time. Especially, for the use cases with strong needs for deterministic and real-time network services with latency and reliability guarantees, it is vital to monitor network devices continuously to guarantee their functioning, detect and isolate relevant problems and verify if all system requirements are being met simultaneously. In this context, this article investigates a light-weight telemetry solution for IWSNs, which enables the collection of accurate and continuous flowbased telemetry information, while adding no overhead on the monitored packets. The proposed monitoring solution adopts the recent Alternate Marking Performance Monitoring (AMPM) concept and mainly targets measuring end-to-end and hopby-hop reliability and delay performance in critical application flows. Besides, the technical capabilities and characteristics of the proposed solution are evaluated via a real-life implementation and practical experiments, validating its suitability for IWSNs

Long-Term Stable Communication in Centrally Scheduled Low-Power Wireless Networks

With the emergence of the Internet of Things (IoT), more devices are connected than ever before. Most of these communicate wirelessly, forming Wireless Sensor Networks. In recent years, there has been a shift from personal networks, like Smart Home, to industrial networks. Industrial networks monitor pipelines or handle the communication between robots in factories. These new applications form the Industrial Internet of Things (IIoT). Many industrial applications have high requirements for communication, higher than the requirements of common IoT networks. Communications must stick to hard deadlines to avoid harm, and they must be highly reliable as skipping information is not a viable option when communicating critical information. Moreover, communication has to remain reliable over longer periods of time. As many sensor locations do not offer a power source, the devices have to run on battery and thus have to be power efficient. Current systems offer solutions for some of these requirements. However, they especially lack long-term stable communication that can dynamically adapt to changes in the wireless medium.In this thesis, we study the problem of stable and reliable communication in centrally scheduled low-power wireless networks. This communication ought to be stable when it can dynamically adapt to changes in the wireless medium while keeping latency at a minimum. We design and investigate approaches to solve the problem of low to high degrees of interference in the wireless medium. We propose three solutions to overcome interference: MASTER with Sliding Windows brings dynamic numbers of retransmissions to centrally scheduled low-power wireless networks, OVERTAKE allows to skip nodes affected by interference along the path, and AUTOBAHN combines opportunistic routing and synchronous transmissions with the Time-Slotted Channel Hopping (TSCH) MAC protocol to overcome local wide-band interference with the lowest possible latency. We evaluate our approaches in detail on testbed deployments and provide open-source implementations of the protocols to enable others to build their work upon them

Survey on wireless technology trade-offs for the industrial internet of things

Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment