Survey of Spectrum Sharing for Inter-Technology Coexistence

Increasing capacity demands in emerging wireless technologies are expected to be met by network densification and spectrum bands open to multiple technologies. These will, in turn, increase the level of interference and also result in more complex inter-technology interactions, which will need to be managed through spectrum sharing mechanisms. Consequently, novel spectrum sharing mechanisms should be designed to allow spectrum access for multiple technologies, while efficiently utilizing the spectrum resources overall. Importantly, it is not trivial to design such efficient mechanisms, not only due to technical aspects, but also due to regulatory and business model constraints. In this survey we address spectrum sharing mechanisms for wireless inter-technology coexistence by means of a technology circle that incorporates in a unified, system-level view the technical and non-technical aspects. We thus systematically explore the spectrum sharing design space consisting of parameters at different layers. Using this framework, we present a literature review on inter-technology coexistence with a focus on wireless technologies with equal spectrum access rights, i.e. (i) primary/primary, (ii) secondary/secondary, and (iii) technologies operating in a spectrum commons. Moreover, we reflect on our literature review to identify possible spectrum sharing design solutions and performance evaluation approaches useful for future coexistence cases. Finally, we discuss spectrum sharing design challenges and suggest future research directions

Facilitating Flexible Link Layer Protocols for Future Wireless Communication Systems

This dissertation addresses the problem of designing link layer protocols which are flexible enough to accommodate the demands offuture wireless communication systems (FWCS).We show that entire link layer protocols with diverse requirements and responsibilities can be composed out of reconfigurable and reusable components.We demonstrate this by designing and implementinga novel concept termed Flexible Link Layer (FLL) architecture.Through extensive simulations and practical experiments, we evaluate a prototype of the suggested architecture in both fixed-spectrumand dynamic spectrum access (DSA) networks. FWCS are expected to overcome diverse challenges including the continual growthin traffic volume and number of connected devices.Furthermore, they are envisioned to support a widerange of new application requirements and operating conditions.Technology trends, including smart homes, communicating machines, and vehicularnetworks, will not only grow on a scale that once was unimaginable, they will also become the predominant communication paradigm, eventually surpassing today's human-produced network traffic. In order for this to become reality, today's systems have to evolve in many ways.They have to exploit allocated resources in a more efficient and energy-conscious manner.In addition to that, new methods for spectrum access and resource sharingneed to be deployed.Having the diversification of applications and network conditions in mind, flexibility at all layers of a communication system is of paramount importance in order to meet the desired goals. However, traditional communication systems are often designed with specific and distinct applications in mind. Therefore, system designers can tailor communication systems according to fixedrequirements and operating conditions, often resulting in highly optimized but inflexible systems.Among the core problems of such design is the mix of data transfer and management aspects.Such a combination of concerns clearly hinders the reuse and extension of existing protocols. To overcome this problem, the key idea explored in this dissertation is a component-based design to facilitate the development of more flexible and versatile link layer protocols.Specifically, the FLL architecture, suggested in this dissertation, employs a generic, reconfigurable data transfer protocol around which one or more complementary protocols, called link layer applications, are responsible for management-related aspects of the layer. To demonstrate the feasibility of the proposed approach, we have designed andimplemented a prototype of the FLL architecture on the basis ofa reconfigurable software defined radio (SDR) testbed.Employing the SDR prototype as well as computer simulations, thisdissertation describes various experiments used to examine a range of link layerprotocols for both fixed-spectrum and DSA networks. This dissertation firstly outlines the challenges faced by FWCSand describes DSA as a possible technology component for their construction.It then specifies the requirements for future DSA systemsthat provide the basis for our further considerations.We then review the background on link layer protocols, surveyrelated work on the construction of flexible protocol frameworks,and compare a range of actual link layer protocols and algorithms.Based on the results of this analysis, we design, implement, and evaluatethe FLL architecture and a selection of actual link layer protocols. We believe the findings of this dissertation add substantively to the existing literature on link layer protocol design and are valuable for theoreticians and experimentalists alike

Analysis, design and experimental evaluation of connectivity management in heterogeneous wireless environments

Mención Internacional en el título de doctorThe future of network communications is mobile as many more users demand for ubiquitous connectivity. Wireless has become the primary access technology or even the only one, leading to an explosion in traffic demand. This challenges network providers to manage and configure new requirements without incrementing costs in the same amount. In addition to the growth in the use of mobile devices, there is a need to operate simultaneously different access technologies. As well, the great diversity of applications and the capabilities of mobile terminals makes possible for us to live in a hyper-connected world and offers new scenarios. This heterogeneity poses great challenges that need to be addressed to offer better performance and seamless experience to the final user. We need to orchestrate solutions to increase flexibility and empower interoperability. Connectivity management is handled from different angles. In the network stack, mobility is more easily handled by IP mobility protocols, since IP is the common layer between the different access technologies and the application diversity. From the end-user perspective, the connection manager is in charge of handling connectivity issues in mobile devices, but it is an unstandardized entity so its performance is heavily implementation-dependent. In this thesis we explore connectivity management from different angles. We study mobility protocols as they are part of our proposed solutions. In most of the cases we include an experimental evaluation of performance with 3G and IEEE 802.11 as the main technologies. We consider heterogeneous scenarios, with several access technologies where mobile devices have also several network interfaces. We evaluate how connectivity is handled as well as its influence in a handover. Based on the analysis of real traces from a cellular network, we confirm the suitability of more efficient mobility management. Moreover, we propose and evaluate three different solutions for providing mobility support in three different heterogeneous scenarios. We perform an experimental evaluation of a vehicular route optimization for network mobility, reporting on the challenges and lessons learned in such a complicated networking environment. We propose an architecture for supporting mobility and enhance handover in a passive optical network deployment. In addition, we design and deploy a mechanism for mobility management based on software-defined networking.Programa Oficial de Doctorado en Ingeniería TelemáticaPresidente: Arturo Azcorra Saloña.- Secretario: Ramón Agüero Calvo.- Vocal: Daniel Nunes Coruj

Quality aspects of Internet telephony

Internet telephony has had a tremendous impact on how people communicate. Many now maintain contact using some form of Internet telephony. Therefore the motivation for this work has been to address the quality aspects of real-world Internet telephony for both fixed and wireless telecommunication. The focus has been on the quality aspects of voice communication, since poor quality leads often to user dissatisfaction. The scope of the work has been broad in order to address the main factors within IP-based voice communication. The first four chapters of this dissertation constitute the background material. The first chapter outlines where Internet telephony is deployed today. It also motivates the topics and techniques used in this research. The second chapter provides the background on Internet telephony including signalling, speech coding and voice Internetworking. The third chapter focuses solely on quality measures for packetised voice systems and finally the fourth chapter is devoted to the history of voice research. The appendix of this dissertation constitutes the research contributions. It includes an examination of the access network, focusing on how calls are multiplexed in wired and wireless systems. Subsequently in the wireless case, we consider how to handover calls from 802.11 networks to the cellular infrastructure. We then consider the Internet backbone where most of our work is devoted to measurements specifically for Internet telephony. The applications of these measurements have been estimating telephony arrival processes, measuring call quality, and quantifying the trend in Internet telephony quality over several years. We also consider the end systems, since they are responsible for reconstructing a voice stream given loss and delay constraints. Finally we estimate voice quality using the ITU proposal PESQ and the packet loss process. The main contribution of this work is a systematic examination of Internet telephony. We describe several methods to enable adaptable solutions for maintaining consistent voice quality. We have also found that relatively small technical changes can lead to substantial user quality improvements. A second contribution of this work is a suite of software tools designed to ascertain voice quality in IP networks. Some of these tools are in use within commercial systems today

Reconfigurable Antenna Systems: Platform implementation and low-power matters

Antennas are a necessary and often critical component of all wireless systems, of which they share the ever-increasing complexity and the challenges of present and emerging trends. 5G, massive low-orbit satellite architectures (e.g. OneWeb), industry 4.0, Internet of Things (IoT), satcom on-the-move, Advanced Driver Assistance Systems (ADAS) and Autonomous Vehicles, all call for highly flexible systems, and antenna reconfigurability is an enabling part of these advances. The terminal segment is particularly crucial in this sense, encompassing both very compact antennas or low-profile antennas, all with various adaptability/reconfigurability requirements. This thesis work has dealt with hardware implementation issues of Radio Frequency (RF) antenna reconfigurability, and in particular with low-power General Purpose Platforms (GPP); the work has encompassed Software Defined Radio (SDR) implementation, as well as embedded low-power platforms (in particular on STM32 Nucleo family of micro-controller). The hardware-software platform work has been complemented with design and fabrication of reconfigurable antennas in standard technology, and the resulting systems tested. The selected antenna technology was antenna array with continuously steerable beam, controlled by voltage-driven phase shifting circuits. Applications included notably Wireless Sensor Network (WSN) deployed in the Italian scientific mission in Antarctica, in a traffic-monitoring case study (EU H2020 project), and into an innovative Global Navigation Satellite Systems (GNSS) antenna concept (patent application submitted). The SDR implementation focused on a low-cost and low-power Software-defined radio open-source platform with IEEE 802.11 a/g/p wireless communication capability. In a second embodiment, the flexibility of the SDR paradigm has been traded off to avoid the power consumption associated to the relevant operating system. Application field of reconfigurable antenna is, however, not limited to a better management of the energy consumption. The analysis has also been extended to satellites positioning application. A novel beamforming method has presented demonstrating improvements in the quality of signals received from satellites. Regarding those who deal with positioning algorithms, this advancement help improving precision on the estimated position

Energy-efficient wireless communication schemes and real-time middleware for machine-to-machine networks

Esta tesis estudia sistemas Machine-to-Machine (M2M) en los que se ejecutan tareas de manera autónoma sin, o con mínima intervención humana. Los sistemas M2M están formados por dispositivos desplegados en un entorno que recolectan información relacionada con una tarea y la envían a aplicaciones para su proceso. Las aplicaciones optimizan estas tareas y responden a los dispositivos con comandos de control. Idealmente, después de configurar las políticas de tareas, los humanos son excluidos del lazo de control. Un importante caso de uso en M2M es la automatización de la red eléctrica, también conocido como Smart Grid, que se trata en esta tesis. Muchos escenarios M2M requieren dispositivos de bajo bitrate, bajo coste y que puedan ser fácilmente desplegables y mantenidos. Una solución adecuada son los dispositivos inalámbricos, alimentados por batería y de capacidades limitadas (con reducida potencia de procesado y memoria). Un bajo mantenimiento requiere años de vida, que sólo pueden conseguirse con protocolos de comunicación altamente eficientes energéticamente. En esta tesis nos centramos principalmente en las capas MAC y de enlace (especialmente en esquemas Cooperative Automatic Repeat Request) para mejorar la eficiencia energética de los dispositivos. Proponemos y evaluamos extensiones de Cooperative MAC para varios estándares como IEEE 802.11, IEEE 802.15.4 y sus revisiones MAC. El transmisor radio de los dispositivos puede ponerse en estado de reposo cuando está inactivo, llevando a cortos periodos de activación (duty-cycle) en dispositivos de bajo bitrate, consiguiendo así un ahorro energético considerable. Dado que la capa MAC controla los estados de reposo de los transmisores radio, los esquemas de Duty-Cycle MAC son el pilar de las comunicaciones energéticamente eficientes. Por ello, en esta tesis diseñamos, analizamos y evaluamos esquemas Cooperative and Duty-Cycled ARQ (CDC-ARQ). CDC-ARQ se basa en la (re)transmisión dinámica de paquetes (dynamic packet forwarding) dependiendo del estado del canal inalámbrico. Cuantificamos las ganancias considerando enlaces inalámbricos de baja potencia con modelos realistas, que sufren efectos de apantallamiento (shadowing) desvanecimientos (fading) de canal, y presentamos las condiciones bajo las cuales CDC-ARQ consiguen mejores resultados que las técnicas estándar de forwarding. Finalmente, determinamos estrategias óptimas de selección de enlace y retransmisión para direct, multi-hop y CDC-ARQ forwarding. Los esquemas de comunicación inalámbricos energéticamente eficientes son adecuados, por ejemplo, para automatización de edificios y hogar, contribuyendo a un buen uso de la energía eléctrica en dichos escenarios. Después de considerar el entorno de dispositivos, la tesis se centra en las aplicaciones, al otro lado de los sistemas M2M. Las aplicaciones típicamente intercambian datos sobre amplias zonas con varios dispositivos remotos. Las técnicas de computación distribuida, estandarizadas e implementadas en plataformas middleware para sistemas M2M, facilitan este intercambio de datos. Los requisitos de comunicación de estas aplicaciones son diversos en términos de latencia, número de actualizaciones, número de dispositivos asociados, etc. Mientras que las soluciones middleware existentes tales como ETSI M2M satisfacen los requisitos de ciertas aplicaciones, dichas soluciones son inadecuadas para los requisitos de latencia de transmisión en tiempo real. Esta tesis propone y analiza modificaciones del ETSI M2M que mejoran el rendimiento en tiempo real. El análisis se ejemplifica con tres aplicaciones Smart Grid, una relacionada con la automatización del hogar y edificios, y las otras dos con la monitorización y control del flujo de potencia de la red eléctrica.This thesis studies emerging Machine-to-Machine (M2M) systems that execute automated tasks without, or with minimum human intervention. M2M systems consist of devices deployed in the field to collect task-related information and send it to remote applications for processing. The applications optimise the tasks and issue control commands back to the devices. Ideally, after configuring the task policies, humans are excluded from the control loop. A prominent and urgent M2M use case concentrates on the automation of the electric power grid, also known as Smart Grid, that is considered in the thesis. Many M2M scenarios require devices that are low-rate, low-cost and can be easily deployed and maintained. A fitting solution are wireless, battery-powered and resource-constrained devices (with limited processing power and memory). Low-maintenance requires years of lifetime, that can only be achieved with unprecedented energy efficiency of communication protocols. Specifically, we focus on the MAC and link layers in this thesis (especially on the Cooperative Automatic Repeat Request schemes) to improve the energy efficiency of the devices. Cooperative MAC extensions to the various standard technologies such as IEEE 802.11, IEEE 802.15.4 and its MAC amendments are proposed and evaluated. The radio transceiver of a device can be put to sleep state when inactive, yielding very low duty-cycles for low-rate devices, and thus achieving significant energy savings. Since the MAC layer controls the radio transceiver sleep states, duty-cycled MAC schemes are the cornerstone of the energy-efficient communication schemes. To that end, Cooperative and Duty-Cycled ARQ (CDC-ARQ) scheme has been designed, analysed and evaluated in this thesis. CDC-ARQ is based on dynamic packet forwarding depending on the current state of the wireless channel. The benefits are quantified by considering realistic wireless low-power links that experience shadowing and multipath fading channel effects. The conditions under which CDC-ARQ outperforms the standard forwarding techniques are presented. Finally, optimal link selection and retransmission strategies are determined for direct, multi-hop or CDC-ARQ forwarding. The studied energy-efficient wireless schemes are suitable e.g. for home and building automation which can contribute to the efficient use of the electric power in homes and buildings. After considering the device domain, the focus of this thesis turns to the applications at the other end of the M2M system. The applications typically exchange data over wide areas with many remote devices. Distributed computing techniques facilitate this data exchange, standardised and implemented in the middleware platform for M2M systems. The communication requirements of these applications are diverse in terms of data latency, update rate, number of associated devices etc. While the existing middleware solutions such as ETSI M2M fully support communication requirements of some applications, the solution is inadequate when it comes to the real-time latency constraint. Some suitable upgrades that improve the real-time performance of data exchange in ETSI M2M middleware are analysed in the thesis. The analysis is exemplified with three Smart Grid applications, one related to the home and building automation and the other two concerned with monitoring and control of the power flow in the electric grid