Non destructive investigation of defects in composite structures by three infrared thermographic techniques

This paper investigates full-field measurement techniques based on Infrared Thermography for Non Destructive Testing (NDT) applications on composite materials. Three methods have been implemented and the paper intends to characterize and compare their defect detection limit and related specific application fields. Various composites have been considered in this study, namely laminates and sandwich structures, in order to address many important issues of performance assessment for the aviation industry

Non destructive investigation of defects in composite structures by fullfield measurement methods

This paper presents different interests of non destructive full-field measurement. More precisely, it focuses on the characterization and the comparison of the X-ray tomography and two methods of infrared thermography in order to define the defect detection limits and to precise the specific application fields for each technique on multi-layered and sandwich composite structures. The obtained results are qualitatively and quantitatively analyzed

Electro-spinning/netting: A strategy for the fabrication of three-dimensional polymer nano-fiber/nets.

Since 2006, a rapid development has been achieved in a subject area, so called electro-spinning/netting (ESN), which comprises the conventional electrospinning process and a unique electro-netting process. Electro-netting overcomes the bottleneck problem of electrospinning technique and provides a versatile method for generating spider-web-like nano-nets with ultrafine fiber diameter less than 20 nm. Nano-nets, supported by the conventional electrospun nanofibers in the nano-fiber/nets (NFN) membranes, exhibit numerious attractive characteristics such as extremely small diameter, high porosity, and Steiner tree network geometry, which make NFN membranes optimal candidates for many significant applications. The progress made during the last few years in the field of ESN is highlighted in this review, with particular emphasis on results obtained in the author's research units. After a brief description of the development of the electrospinning and ESN techniques, several fundamental properties of NFN nanomaterials are addressed. Subsequently, the used polymers and the state-of-the-art strategies for the controllable fabrication of NFN membranes are highlighted in terms of the ESN process. Additionally, we highlight some potential applications associated with the remarkable features of NFN nanostructure. Our discussion is concluded with some personal perspectives on the future development in which this wonderful technique could be pursued

Implementation of in Process Surface Metrology for R2R Flexible PV Barrier Films

Thin functional barrier layers of aluminum oxide (Al2O3) that are used particularly in photovoltaic (PV) modules to prevent the possibility of water vapor ingress should be applied over the entire PV surface without any defects. However, for barrier layer thicknesses within the sub-micrometer range (up to 50 nm) produced through the atomic layer deposition (ALD) method, it is common for defects to occur during the production process. To avoid defective barriers from being incorporated in the final PV unit, defects need to be detected during the barrier production process. In this paper, the implementation of in process inspection system capable of detecting surface defects such as pinholes, scratches, or particles down to a lateral size of 3 μm and a vertical resolution of 10 nm over a 500 mm barrier width is presented. The system has a built-in environmental vibration compensation capability, and can monitor ALD-coated films manufactured using roll-to-roll (R2R) techniques. Ultimately, with the aid of this in process measurement system, it should be possible to monitor the coating surface process of large-area substrates, and if necessary, carry out remedial work on the process parameters

ndt thermographic techniques on cfrp structural components for aeronautical application

Abstract This paper describes the application of active pulsed Thermography (PT) as a Non-Destructive Test (NDT) method for the investigation of CFRP aeronautical components. The analyzed specimens include T-shaped stringers, previously monitored by ultrasonic analysis, and laminated flat plates with internal production defects. Several set-up tests allowed to identify optimal configurations for the defect detection, according to specimen geometry and defect location. A custom post-processing algorithm has been developed to improve thermographic data for more precise defect characterization, whilst a successive full-field contrast mapping allows to achieve a reliable defect distribution map and a better definition on larger areas. Detection of defects was studied with a specific thermal contrast evaluation, with a suitable choice of undamaged reference area during the transient cooling phase. The influence of heating time and experimental set-up on the thermal contrast results has also been studied; moreover, the ability of thermographic technique to detect real small production defects with accuracy and reliability is verified for CFRP aeronautical components

Defect and thickness inspection system for cast thin films using machine vision and full-field transmission densitometry

Quick mass production of homogeneous thin film material is required in paper, plastic, fabric, and thin film industries. Due to the high feed rates and small thicknesses, machine vision and other nondestructive evaluation techniques are used to ensure consistent, defect-free material by continuously assessing post-production quality. One of the fastest growing inspection areas is for 0.5-500 micrometer thick thin films, which are used for semiconductor wafers, amorphous photovoltaics, optical films, plastics, and organic and inorganic membranes. As a demonstration application, a prototype roll-feed imaging system has been designed to inspect high-temperature polymer electrolyte membrane (PEM), used for fuel cells, after being die cast onto a moving transparent substrate. The inspection system continuously detects thin film defects and classifies them with a neural network into categories of holes, bubbles, thinning, and gels, with a 1.2% false alarm rate, 7.1% escape rate, and classification accuracy of 96.1%. In slot die casting processes, defect types are indicative of a misbalance in the mass flow rate and web speed; so, based on the classified defects, the inspection system informs the operator of corrective adjustments to these manufacturing parameters. Thickness uniformity is also critical to membrane functionality, so a real-time, full-field transmission densitometer has been created to measure the bi-directional thickness profile of the semi-transparent PEM between 25-400 micrometers. The local thickness of the 75 mm x 100 mm imaged area is determined by converting the optical density of the sample to thickness with the Beer-Lambert law. The PEM extinction coefficient is determined to be 1.4 D/mm and the average thickness error is found to be 4.7%. Finally, the defect inspection and thickness profilometry systems are compiled into a specially-designed graphical user interface for intuitive real-time operation and visualization.M.S.Committee Chair: Tequila Harris; Committee Member: Levent Degertekin; Committee Member: Wayne Dale