Improvement of Quality of Service Parameters in Dynamic and Heterogeneous WBAN

With growth in population and diseases, there is a need for monitoring and curing of patients with low cost for various health issues. Due to life threatening conditions, loss-free and timely sending of data is an essential factor for healthcare WBAN. Health data needs to transmit through reliable connection and with minimum delay, but designing a reliable, and congestion and delay free transport protocol is a challenging area in Wireless Body Area Networks (WBANs). Generally, transport layer is responsible for congestion control and reliable packet delivery. Congestion is a critical issue in the healthcare system. It not only increases loss and delay ratio but also raise a number of retransmissions and packet drop rates, which hampers Quality of Service (QoS). Thus, to meet the QoS requirements of healthcare WBANs, a reliable and fair transport protocol is mandatory. This motivates us to design a new protocol, which provides loss, delay and congestion free transmission of heterogeneous data. In this paper, we present a Dynamic priority based Quality of Service management protocol which not only controls the congestion in the network but also provides a reliable transmission with timely delivery of the packet

QoS Challenges and Opportunities in Wireless Sensor/Actuator Networks

A wireless sensor/actuator network (WSAN) is a group of sensors and actuators that are geographically distributed and interconnected by wireless networks. Sensors gather information about the state of physical world. Actuators react to this information by performing appropriate actions. WSANs thus enable cyber systems to monitor and manipulate the behavior of the physical world. WSANs are growing at a tremendous pace, just like the exploding evolution of Internet. Supporting quality of service (QoS) will be of critical importance for pervasive WSANs that serve as the network infrastructure of diverse applications. To spark new research and development interests in this field, this paper examines and discusses the requirements, critical challenges, and open research issues on QoS management in WSANs. A brief overview of recent progress is given.Comment: 12 pages, 1 figure; revie

PFPS: Priority-First Packet Scheduler for IEEE 802.15.4 Heterogeneous Wireless Sensor Networks

This paper presents priority-first packet scheduling approach for heterogeneous traffic flows in low data rate heterogeneous wireless sensor networks (HWSNs). A delay sensitive or emergency event occurrence demands the data delivery on the priority basis over regular monitoring sensing applications. In addition, handling sudden multi-event data and achieving their reliability requirements distinctly becomes the challenge and necessity in the critical situations. To address this problem, this paper presents distributed approach of managing data transmission for simultaneous traffic flows over multi-hop topology, which reduces the load of a sink node; and helps to make a life of the network prolong. For this reason, heterogeneous traffic flows algorithm (CHTF) algorithm classifies the each incoming packets either from source nodes or downstream hop node based on the packet priority and stores them into the respective queues. The PFPS-EDF and PFPS-FCFS algorithms present scheduling for each data packets using priority weight. Furthermore, reporting rate is timely updated based on the queue level considering their fairness index and processing rate. The reported work in this paper is validated in ns2 (ns2.32 allinone) simulator by putting the network into each distinct cases for validation of presented work and real time TestBed. The protocol evaluation presents that the distributed queue-based PFPS scheduling mechanism works efficiently using CSMA/CA MAC protocol of the IEEE 802.15.4 sensor networks

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

SDL based validation of a node monitoring protocol

Mobile ad hoc network is a wireless, self-configured, infrastructureless network of mobile nodes. The nodes are highly mobile, which makes the application running on them face network related problems like node failure, link failure, network level disconnection, scarcity of resources, buffer degradation, and intermittent disconnection etc. Node failure and Network fault are need to be monitored continuously by supervising the network status. Node monitoring protocol is crucial, so it is required to test the protocol exhaustively to verify and validate the functionality and accuracy of the designed protocol. This paper presents a validation model for Node Monitoring Protocol using Specification and Description Llanguage (SDL) using both Static Agent (SA) and Mobile Agent (MA). We have verified properties of the Node Monitoring Protocol (NMP) based on the global states with no exits, deadlock states or proper termination states using reachability graph. Message Sequence Chart (MSC) gives an intuitive understanding of the described system behavior with varying node density and complex behavior etc.Comment: 16 pages, 24 figures, International Conference of Networks, Communications, Wireless and Mobile 201

MINIMAX FILTERING IN WIRELESS SENSOR AND ACTOR NETWORKS

In this paper to handle the mobility of actors a hybrid strategy that includes location updating and location prediction is used.The usage of Kalman Filtering in location prediction high power and energy consumptions. To avoid the drawbacks of Kalman Filtering in location prediction, we make use of Minimax filtering (also Known as H∞ filtering). Minimax Filter has been used in WSANs by minimizing the estimation error and maximizing the worst case adversary noise. Minimax filtering will also minimize power and energy consumptions

Sensornet checkpointing: enabling repeatability in testbeds and realism in simulations

When developing sensor network applications, the shift from simulation to testbed causes application failures, resulting in additional time-consuming iterations between simulation and testbed. We propose transferring sensor network checkpoints between simulation and testbed to reduce the gap between simulation and testbed. Sensornet checkpointing combines the best of both simulation and testbeds: the nonintrusiveness and repeatability of simulation, and the realism of testbeds

Simulating sensor networks

Tese de mestrado em Informática, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2010Nos últimos anos, as redes de sensores sem fios conheceram um grande impulso em variadas ´áreas, nomeadamente na monitorização industrial e ambiental e, mais recentemente, na logística e noutras aplicações que envolvem processos de negócio e a chamada Internet das Coisas e dos Serviços. Contudo, e apesar dos avanços que se têm verificado tanto em termos de hardware como de software, estas redes são difíceis de programar, testar e instalar. A simulação de redes de sensores é frequentemente utilizada para testar e depurar aplicações para redes de sensores, pois permite testar a execução de das aplicações em ambientes virtuais. Esta tese aborda um problema que diz respeito a testar estas redes através de simulação: a definição (manual) de modelos. A nossa abordagem aponta para a geração de modelos de simulação directamente a partir de aplicações redes de sensores, em particular, modelos para o simulador VisualSense criados a partir de aplicações escritas em Callas, uma linguagem de programação para as redes de sensores. Para tal, criamos uma ferramenta capaz de gerar modelos que ´e paramétrica pelos modelos de rede e modelos sensores da rede que se pretende modelar, e ainda por um conjunto extensível de parâmetros de simulação. As nossas experiências mostraram resultados encorajadores na simulação de redes de grande escala, uma vez que conseguimos executar simulações com até 5000 nós. À medida que as redes de sensores sem fios começam a ser utilizadas em processos de negócio, a informação que recolhem do ambiente tem cada vez mais influência no decurso dos fluxos de trabalho associados aos processos de negócio. De um modo geral, os testes levados a cabo em fluxos de trabalho fazem uso de informação gravada em fluxos de trabalho executados previamente, tornando difícil testar o sistema como um todo. Em alternativa, e como uma segunda proposta desta tese, propomos testar fluxos de trabalho através da incorporação de resultados obtidos nas simulações das aplicações das redes de sensores. Além de cobrir os casos cobertos pela primeira abordagem, esta técnica permite testar novos fluxos de trabalho, bem como as mudanças ocorridas num determinado fluxo de trabalho por acontecimentos no ambiente.In recent years, Wireless Sensor Networks have gaining momentum in several fields, notably in industrial and environmental monitoring and, more recently, in logistics. However, and in spite of the advances in hardware and software, Wireless Sensor Networks are still hard to program, test, and deploy. Simulation is often used for testing and debugging sensor networks because they allow us to perform deployments in virtual environments. This paper addresses a key problem of testing such networks using simulation: (manual) model definition. Our approach is to generate simulation models directly from WSN applications, in particular, VisualSense simulator models from applications written in Callas, a programming language for WSN. For that purpose, we create a model generator tool that is parameter sable by network and sensor templates, and by an extensible set of simulation parameters. Our experiments show encouraging results on simulating large scale networks, as we are able to handle WSN with as many as 5000 nodes. As Wireless Sensor Networks begin to play some role in business processes, the information they gather from the environment influences the execution of workflows. Generally, the tests carried out on these systems make use of recorded information in earlier workflow executions, making it difficult to test the system as a whole. Alternatively, and as a second proposal of this thesis, we propose testing such workflows by incorporating results obtained from the simulation of sensor network applications. Besides covering the situations described in the first approach, this technique allows the testing of new workflows, as well as the changes made to a given workflow by events in the environment