Resource-aware scheduling for 2D/3D multi-/many-core processor-memory systems

This dissertation addresses the complexities of 2D/3D multi-/many-core processor-memory systems, focusing on two key areas: enhancing timing predictability in real-time multi-core processors and optimizing performance within thermal constraints. The integration of an increasing number of transistors into compact chip designs, while boosting computational capacity, presents challenges in resource contention and thermal management. The first part of the thesis improves timing predictability. We enhance shared cache interference analysis for set-associative caches, advancing the calculation of Worst-Case Execution Time (WCET). This development enables accurate assessment of cache interference and the effectiveness of partitioned schedulers in real-world scenarios. We introduce TCPS, a novel task and cache-aware partitioned scheduler that optimizes cache partitioning based on task-specific WCET sensitivity, leading to improved schedulability and predictability. Our research explores various cache and scheduling configurations, providing insights into their performance trade-offs. The second part focuses on thermal management in 2D/3D many-core systems. Recognizing the limitations of Dynamic Voltage and Frequency Scaling (DVFS) in S-NUCA many-core processors, we propose synchronous thread migrations as a thermal management strategy. This approach culminates in the HotPotato scheduler, which balances performance and thermal safety. We also introduce 3D-TTP, a transient temperature-aware power budgeting strategy for 3D-stacked systems, reducing the need for Dynamic Thermal Management (DTM) activation. Finally, we present 3QUTM, a novel method for 3D-stacked systems that combines core DVFS and memory bank Low Power Modes with a learning algorithm, optimizing response times within thermal limits. This research contributes significantly to enhancing performance and thermal management in advanced processor-memory systems

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

MPSoCBench : um framework para avaliação de ferramentas e metodologias para sistemas multiprocessados em chip

Orientador: Rodolfo Jardim de AzevedoTese (doutorado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: Recentes metodologias e ferramentas de projetos de sistemas multiprocessados em chip (MPSoC) aumentam a produtividade por meio da utilização de plataformas baseadas em simuladores, antes de definir os últimos detalhes da arquitetura. No entanto, a simulação só é eficiente quando utiliza ferramentas de modelagem que suportem a descrição do comportamento do sistema em um elevado nível de abstração. A escassez de plataformas virtuais de MPSoCs que integrem hardware e software escaláveis nos motivou a desenvolver o MPSoCBench, que consiste de um conjunto escalável de MPSoCs incluindo quatro modelos de processadores (PowerPC, MIPS, SPARC e ARM), organizado em plataformas com 1, 2, 4, 8, 16, 32 e 64 núcleos, cross-compiladores, IPs, interconexões, 17 aplicações paralelas e estimativa de consumo de energia para os principais componentes (processadores, roteadores, memória principal e caches). Uma importante demanda em projetos MPSoC é atender às restrições de consumo de energia o mais cedo possível. Considerando que o desempenho do processador está diretamente relacionado ao consumo, há um crescente interesse em explorar o trade-off entre consumo de energia e desempenho, tendo em conta o domínio da aplicação alvo. Técnicas de escalabilidade dinâmica de freqüência e voltagem fundamentam-se em gerenciar o nível de tensão e frequência da CPU, permitindo que o sistema alcance apenas o desempenho suficiente para processar a carga de trabalho, reduzindo, consequentemente, o consumo de energia. Para explorar a eficiência energética e desempenho, foram adicionados recursos ao MPSoCBench, visando explorar escalabilidade dinâmica de voltaegem e frequência (DVFS) e foram validados três mecanismos com base na estimativa dinâmica de energia e taxa de uso de CPUAbstract: Recent design methodologies and tools aim at enhancing the design productivity by providing a software development platform before the definition of the final Multiprocessor System on Chip (MPSoC) architecture details. However, simulation can only be efficiently performed when using a modeling and simulation engine that supports system behavior description at a high abstraction level. The lack of MPSoC virtual platform prototyping integrating both scalable hardware and software in order to create and evaluate new methodologies and tools motivated us to develop the MPSoCBench, a scalable set of MPSoCs including four different ISAs (PowerPC, MIPS, SPARC, and ARM) organized in platforms with 1, 2, 4, 8, 16, 32, and 64 cores, cross-compilers, IPs, interconnections, 17 parallel version of software from well-known benchmarks, and power consumption estimation for main components (processors, routers, memory, and caches). An important demand in MPSoC designs is the addressing of energy consumption constraints as early as possible. Whereas processor performance comes with a high power cost, there is an increasing interest in exploring the trade-off between power and performance, taking into account the target application domain. Dynamic Voltage and Frequency Scaling techniques adaptively scale the voltage and frequency levels of the CPU allowing it to reach just enough performance to process the system workload while meeting throughput constraints, and thereby, reducing the energy consumption. To explore this wide design space for energy efficiency and performance, both for hardware and software components, we provided MPSoCBench features to explore dynamic voltage and frequency scalability (DVFS) and evaluated three mechanisms based on energy estimation and CPU usage rateDoutoradoCiência da ComputaçãoDoutora em Ciência da Computaçã

Parallel architectures and runtime systems co-design for task-based programming models

The increasing parallelism levels in modern computing systems has extolled the need for a holistic vision when designing multiprocessor architectures taking in account the needs of the programming models and applications. Nowadays, system design consists of several layers on top of each other from the architecture up to the application software. Although this design allows to do a separation of concerns where it is possible to independently change layers due to a well-known interface between them, it is hampering future systems design as the Law of Moore reaches to an end. Current performance improvements on computer architecture are driven by the shrinkage of the transistor channel width, allowing faster and more power efficient chips to be made. However, technology is reaching physical limitations were the transistor size will not be able to be reduced furthermore and requires a change of paradigm in systems design. This thesis proposes to break this layered design, and advocates for a system where the architecture and the programming model runtime system are able to exchange information towards a common goal, improve performance and reduce power consumption. By making the architecture aware of runtime information such as a Task Dependency Graph (TDG) in the case of dataflow task-based programming models, it is possible to improve power consumption by exploiting the critical path of the graph. Moreover, the architecture can provide hardware support to create such a graph in order to reduce the runtime overheads and making possible the execution of fine-grained tasks to increase the available parallelism. Finally, the current status of inter-node communication primitives can be exposed to the runtime system in order to perform a more efficient communication scheduling, and also creates new opportunities of computation and communication overlap that were not possible before. An evaluation of the proposals introduced in this thesis is provided and a methodology to simulate and characterize the application behavior is also presented.El aumento del paralelismo proporcionado por los sistemas de cómputo modernos ha provocado la necesidad de una visión holística en el diseño de arquitecturas multiprocesador que tome en cuenta las necesidades de los modelos de programación y las aplicaciones. Hoy en día el diseño de los computadores consiste en diferentes capas de abstracción con una interfaz bien definida entre ellas. Las limitaciones de esta aproximación junto con el fin de la ley de Moore limitan el potencial de los futuros computadores. La mayoría de las mejoras actuales en el diseño de los computadores provienen fundamentalmente de la reducción del tamaño del canal del transistor, lo cual permite chips más rápidos y con un consumo eficiente sin apenas cambios fundamentales en el diseño de la arquitectura. Sin embargo, la tecnología actual está alcanzando limitaciones físicas donde no será posible reducir el tamaño de los transistores motivando así un cambio de paradigma en la construcción de los computadores. Esta tesis propone romper este diseño en capas y abogar por un sistema donde la arquitectura y el sistema de tiempo de ejecución del modelo de programación sean capaces de intercambiar información para alcanzar una meta común: La mejora del rendimiento y la reducción del consumo energético. Haciendo que la arquitectura sea consciente de la información disponible en el modelo de programación, como puede ser el grafo de dependencias entre tareas en los modelos de programación dataflow, es posible reducir el consumo energético explotando el camino critico del grafo. Además, la arquitectura puede proveer de soporte hardware para crear este grafo con el objetivo de reducir el overhead de construir este grado cuando la granularidad de las tareas es demasiado fina. Finalmente, el estado de las comunicaciones entre nodos puede ser expuesto al sistema de tiempo de ejecución para realizar una mejor planificación de las comunicaciones y creando nuevas oportunidades de solapamiento entre cómputo y comunicación que no eran posibles anteriormente. Esta tesis aporta una evaluación de todas estas propuestas, así como una metodología para simular y caracterizar el comportamiento de las aplicacionesPostprint (published version

Performance prediction for dynamic voltage and frequency scaling

textThis dissertation proves the feasibility of accurate runtime prediction of processor performance under frequency scaling. The performance predictors developed in this dissertation allow processors capable of dynamic voltage and frequency scaling (DVFS) to improve their performance or energy efficiency by dynamically adapting chip or core voltages and frequencies to workload characteristics. The dissertation considers three processor configurations: the uniprocessor capable of chip-level DVFS, the private cache chip multiprocessor capable of per-core DVFS, and the shared cache chip multiprocessor capable of per-core DVFS. Depending on processor configuration, the presented performance predictors help the processor realize 72–85% of average oracle performance or energy efficiency gains.Electrical and Computer Engineerin

DReAM: An approach to estimate per-Task DRAM energy in multicore systems

Accurate per-task energy estimation in multicore systems would allow performing per-task energy-aware task scheduling and energy-aware billing in data centers, among other applications. Per-task energy estimation is challenged by the interaction between tasks in shared resources, which impacts tasks’ energy consumption in uncontrolled ways. Some accurate mechanisms have been devised recently to estimate per-task energy consumed on-chip in multicores, but there is a lack of such mechanisms for DRAM memories. This article makes the case for accurate per-task DRAM energy metering in multicores, which opens new paths to energy/performance optimizations. In particular, the contributions of this article are (i) an ideal per-task energy metering model for DRAM memories; (ii) DReAM, an accurate yet low cost implementation of the ideal model (less than 5% accuracy error when 16 tasks share memory); and (iii) a comparison with standard methods (even distribution and access-count based) proving that DReAM is much more accurate than these other methods.Peer ReviewedPostprint (author's final draft

Towards resource-aware computing for task-based runtimes and parallel architectures

Current large scale systems show increasing power demands, to the point that it has become a huge strain on facilities and budgets. The increasing restrictions in terms of power consumption of High Performance Computing (HPC) systems and data centers have forced hardware vendors to include power capping capabilities in their commodity processors. Power capping opens up new opportunities for applications to directly manage their power behavior at user level. However, constraining power consumption causes the individual sockets of a parallel system to deliver different performance levels under the same power cap, even when they are equally designed, which is an effect caused by manufacturing variability. Modern chips suffer from heterogeneous power consumption due to manufacturing issues, a problem known as manufacturing or process variability. As a result, systems that do not consider such variability caused by manufacturing issues lead to performance degradations and wasted power. In order to avoid such negative impact, users and system administrators must actively counteract any manufacturing variability. In this thesis we show that parallel systems benefit from taking into account the consequences of manufacturing variability, in terms of both performance and energy efficiency. In order to evaluate our work we have also implemented our own task-based version of the PARSEC benchmark suite. This allows to test our methodology using state-of-the-art parallelization techniques and real world workloads. We present two approaches to mitigate manufacturing variability, by power redistribution at runtime level and by power- and variability-aware job scheduling at system-wide level. A parallel runtime system can be used to effectively deal with this new kind of performance heterogeneity by compensating the uneven effects of power capping. In the context of a NUMA node composed of several multi core sockets, our system is able to optimize the energy and concurrency levels assigned to each socket to maximize performance. Applied transparently within the parallel runtime system, it does not require any programmer interaction like changing the application source code or manually reconfiguring the parallel system. We compare our novel runtime analysis with an offline approach and demonstrate that it can achieve equal performance at a fraction of the cost. The next approach presented in this theis, we show that it is possible to predict the impact of this variability on specific applications by using variability-aware power prediction models. Based on these power models, we propose two job scheduling policies that consider the effects of manufacturing variability for each application and that ensures that power consumption stays under a system wide power budget. We evaluate our policies under different power budgets and traffic scenarios, consisting of both single- and multi-node parallel applications.Los sistemas modernos de gran escala muestran crecientes demandas de energía, hasta el punto de que se ha convertido en una gran presión para las instalaciones y los presupuestos. Las restricciones crecientes de consumo de energía de los sistemas de alto rendimiento (HPC) y los centros de datos han obligado a los proveedores de hardware a incluir capacidades de limitación de energía en sus procesadores. La limitación de energía abre nuevas oportunidades para que las aplicaciones administren directamente su comportamiento de energía a nivel de usuario. Sin embargo, la restricción en el consumo de energía de sockets individuales de un sistema paralelo resulta en diferentes niveles de rendimiento, por el mismo límite de potencia, incluso cuando están diseñados por igual. Esto es un efecto causado durante el proceso de la fabricación. Los chips modernos sufren de un consumo de energía heterogéneo debido a problemas de fabricación, un problema conocido como variabilidad del proceso o fabricación. Como resultado, los sistemas que no consideran este tipo de variabilidad causada por problemas de fabricación conducen a degradaciones del rendimiento y desperdicio de energía. Para evitar dicho impacto negativo, los usuarios y administradores del sistema deben contrarrestar activamente cualquier variabilidad de fabricación. En esta tesis, demostramos que los sistemas paralelos se benefician de tener en cuenta las consecuencias de la variabilidad de la fabricación, tanto en términos de rendimiento como de eficiencia energética. Para evaluar nuestro trabajo, también hemos implementado nuestra propia versión del paquete de aplicaciones de prueba PARSEC, basada en tareas paralelos. Esto permite probar nuestra metodología utilizando técnicas avanzadas de paralelización con cargas de trabajo del mundo real. Presentamos dos enfoques para mitigar la variabilidad de fabricación, mediante la redistribución de la energía a durante la ejecución de las aplicaciones y mediante la programación de trabajos a nivel de todo el sistema. Se puede utilizar un sistema runtime paralelo para tratar con eficacia este nuevo tipo de heterogeneidad de rendimiento, compensando los efectos desiguales de la limitación de potencia. En el contexto de un nodo NUMA compuesto de varios sockets y núcleos, nuestro sistema puede optimizar los niveles de energía y concurrencia asignados a cada socket para maximizar el rendimiento. Aplicado de manera transparente dentro del sistema runtime paralelo, no requiere ninguna interacción del programador como cambiar el código fuente de la aplicación o reconfigurar manualmente el sistema paralelo. Comparamos nuestro novedoso análisis de runtime con los resultados óptimos, obtenidos de una análisis manual exhaustiva, y demostramos que puede lograr el mismo rendimiento a una fracción del costo. El siguiente enfoque presentado en esta tesis, muestra que es posible predecir el impacto de la variabilidad de fabricación en aplicaciones específicas mediante el uso de modelos de predicción de potencia conscientes de la variabilidad. Basados ​​en estos modelos de predicción de energía, proponemos dos políticas de programación de trabajos que consideran los efectos de la variabilidad de fabricación para cada aplicación y que aseguran que el consumo se mantiene bajo un presupuesto de energía de todo el sistema. Evaluamos nuestras políticas con diferentes presupuestos de energía y escenarios de tráfico, que consisten en aplicaciones paralelas que corren en uno o varios nodos

Towards resource-aware computing for task-based runtimes and parallel architectures

Current large scale systems show increasing power demands, to the point that it has become a huge strain on facilities and budgets. The increasing restrictions in terms of power consumption of High Performance Computing (HPC) systems and data centers have forced hardware vendors to include power capping capabilities in their commodity processors. Power capping opens up new opportunities for applications to directly manage their power behavior at user level. However, constraining power consumption causes the individual sockets of a parallel system to deliver different performance levels under the same power cap, even when they are equally designed, which is an effect caused by manufacturing variability. Modern chips suffer from heterogeneous power consumption due to manufacturing issues, a problem known as manufacturing or process variability. As a result, systems that do not consider such variability caused by manufacturing issues lead to performance degradations and wasted power. In order to avoid such negative impact, users and system administrators must actively counteract any manufacturing variability. In this thesis we show that parallel systems benefit from taking into account the consequences of manufacturing variability, in terms of both performance and energy efficiency. In order to evaluate our work we have also implemented our own task-based version of the PARSEC benchmark suite. This allows to test our methodology using state-of-the-art parallelization techniques and real world workloads. We present two approaches to mitigate manufacturing variability, by power redistribution at runtime level and by power- and variability-aware job scheduling at system-wide level. A parallel runtime system can be used to effectively deal with this new kind of performance heterogeneity by compensating the uneven effects of power capping. In the context of a NUMA node composed of several multi core sockets, our system is able to optimize the energy and concurrency levels assigned to each socket to maximize performance. Applied transparently within the parallel runtime system, it does not require any programmer interaction like changing the application source code or manually reconfiguring the parallel system. We compare our novel runtime analysis with an offline approach and demonstrate that it can achieve equal performance at a fraction of the cost. The next approach presented in this theis, we show that it is possible to predict the impact of this variability on specific applications by using variability-aware power prediction models. Based on these power models, we propose two job scheduling policies that consider the effects of manufacturing variability for each application and that ensures that power consumption stays under a system wide power budget. We evaluate our policies under different power budgets and traffic scenarios, consisting of both single- and multi-node parallel applications.Los sistemas modernos de gran escala muestran crecientes demandas de energía, hasta el punto de que se ha convertido en una gran presión para las instalaciones y los presupuestos. Las restricciones crecientes de consumo de energía de los sistemas de alto rendimiento (HPC) y los centros de datos han obligado a los proveedores de hardware a incluir capacidades de limitación de energía en sus procesadores. La limitación de energía abre nuevas oportunidades para que las aplicaciones administren directamente su comportamiento de energía a nivel de usuario. Sin embargo, la restricción en el consumo de energía de sockets individuales de un sistema paralelo resulta en diferentes niveles de rendimiento, por el mismo límite de potencia, incluso cuando están diseñados por igual. Esto es un efecto causado durante el proceso de la fabricación. Los chips modernos sufren de un consumo de energía heterogéneo debido a problemas de fabricación, un problema conocido como variabilidad del proceso o fabricación. Como resultado, los sistemas que no consideran este tipo de variabilidad causada por problemas de fabricación conducen a degradaciones del rendimiento y desperdicio de energía. Para evitar dicho impacto negativo, los usuarios y administradores del sistema deben contrarrestar activamente cualquier variabilidad de fabricación. En esta tesis, demostramos que los sistemas paralelos se benefician de tener en cuenta las consecuencias de la variabilidad de la fabricación, tanto en términos de rendimiento como de eficiencia energética. Para evaluar nuestro trabajo, también hemos implementado nuestra propia versión del paquete de aplicaciones de prueba PARSEC, basada en tareas paralelos. Esto permite probar nuestra metodología utilizando técnicas avanzadas de paralelización con cargas de trabajo del mundo real. Presentamos dos enfoques para mitigar la variabilidad de fabricación, mediante la redistribución de la energía a durante la ejecución de las aplicaciones y mediante la programación de trabajos a nivel de todo el sistema. Se puede utilizar un sistema runtime paralelo para tratar con eficacia este nuevo tipo de heterogeneidad de rendimiento, compensando los efectos desiguales de la limitación de potencia. En el contexto de un nodo NUMA compuesto de varios sockets y núcleos, nuestro sistema puede optimizar los niveles de energía y concurrencia asignados a cada socket para maximizar el rendimiento. Aplicado de manera transparente dentro del sistema runtime paralelo, no requiere ninguna interacción del programador como cambiar el código fuente de la aplicación o reconfigurar manualmente el sistema paralelo. Comparamos nuestro novedoso análisis de runtime con los resultados óptimos, obtenidos de una análisis manual exhaustiva, y demostramos que puede lograr el mismo rendimiento a una fracción del costo. El siguiente enfoque presentado en esta tesis, muestra que es posible predecir el impacto de la variabilidad de fabricación en aplicaciones específicas mediante el uso de modelos de predicción de potencia conscientes de la variabilidad. Basados ​​en estos modelos de predicción de energía, proponemos dos políticas de programación de trabajos que consideran los efectos de la variabilidad de fabricación para cada aplicación y que aseguran que el consumo se mantiene bajo un presupuesto de energía de todo el sistema. Evaluamos nuestras políticas con diferentes presupuestos de energía y escenarios de tráfico, que consisten en aplicaciones paralelas que corren en uno o varios nodos.Postprint (published version