Interconnect optimizations for nanometer VLSI design

textAs the semiconductor technology scales into deeper sub-micron domain, billions of transistors can be used on a single system-on-chip (SOC) makes interconnection optimization more important roughly for two reasons. First, congestion, power, timing in routing and buffering requirements make inter- connection optimization more and more challenging. Second, gate delay get- ting shorter while the RC delay gets longer due to scaling. Study of interconnection construction and optimization algorithms in real industry flows and designs ends up with interesting findings. One used to be overlooked but very important and practical problem is how to utilize over- the-block routing resources intelligently. Routing over large IP blocks needs special attention as there is almost no way to insert buffers inside hard IP blocks, which can lead to unsolvable slew/timing violations. In current design flows we have seen, the routing resources over the IP blocks were either dealt as routing blockages leading to a significant waste, or simply treated in the same way as outside-the-block routing resources, which would violate the slew constraints and thus fail buffering. To handle that, this work proposes a novel buffering-aware over-the- block rectilinear Steiner minimum tree (BOB-RSMT) algorithm which helps reclaim the “wasted” over-the-block routing resources while meeting user-specified slew constraints. Proposed algorithm incrementally and efficiently migrates initial tree structures with buffering-awareness to meet slew constraints while minimizing wire-length. Moreover, due to the fact that timing optimization is important for the VLSI design, in this work, timing-driven over-the-block rectilinear Steiner tree (TOB-RST) is also studied to optimize critical paths. This proposed TOB-RST algorithm can be used in routing or post-routing stage to provide high-quality topologies to help close timing. Then a follow-up problem emerges: how to accomplish the whole routing with over-the-block routing resources used properly. Utilizing over-the- block routing resources could dramatically improve the routing solution, yet require special attention, since the slew, affected by different RC on different metal layers, must be constrained by buffering and is easily violated. Moreover, even of all nets are slew-legalized, the routing solution could still suffer from heavy congestion problem. A new global router, BOB-Router, is to solve the over-the-block global routing problem through minimizing overflows, wire-length and via count simultaneously without violating slew constraints. Based on my completed works, BOB-RSMT and BOB-Router tremendously improve the overall routing and buffering quality. Experimental results show that proposed over-the-block rectilinear Steiner tree construction and routing completely satisfies the slew constraints and significantly outperforms the obstacle-avoiding rectilinear Steiner tree construction and routing in terms of wire-length, via count and overflows.Electrical and Computer Engineerin

Using ant colony optimization for routing in microprocesors

Power consumption is an important constraint on VLSI systems. With the advancement in technology, it is now possible to pack a large range of functionalities into VLSI devices. Hence it is important to find out ways to utilize these functionalities with optimized power consumption. This work focuses on curbing power consumption at the design stage. This work emphasizes minimizing active power consumption by minimizing the load capacitance of the chip. Capacitance of wires and vias can be minimized using Ant Colony Optimization (ACO) algorithms. ACO provides a multi agent framework for combinatorial optimization problems and hence is used to handle multiple constraints of minimizing wire-length and vias to achieve the goal of minimizing capacitance and hence power consumption. The ACO developed here is able to achieve an 8% reduction of wire-length and 7% reduction in vias thereby providing a 7% reduction in total capacitance, compared to other state of the art routers

Fast Repeater Tree Construction

Repeaters are used during physical design of chips to improve the electrical and timing properties of interconnections. They are added along Steiner trees that connect root gates to sinks, creating repeater trees. Their construction became a crucial part of chip design. We present a new algorithm to solve the repeater tree construction problem. We first present an extensive version of the Repeater Tree Problem. Our problem formulation encapsulates most of the constraints that have been studied so far. We also consider several aspects for the first time, for example, slew dependent required arrival times at repeater tree sinks. The employed technology, the properties of available repeaters and metal wires, the shape of the chip, the temperature, the voltages, and many other factors highly influence the results of repeater tree construction. To take all this into account, we extensively preprocess the environment to extract parameters for our algorithms. We first present an algorithm for Steiner tree creation and prove that our algorithm is able to create timing-efficient as well as cost-efficient trees. Our algorithm is based on a delay model that accurately describes the timing that one can achieve after repeater insertion upfront. Next, we deal with the problem of adding repeaters to a given Steiner tree. The predominantly used algorithms to solve this problem use dynamic programming. However, they have several drawbacks. Firstly, potential repeater positions along the Steiner tree have to be chosen upfront. Secondly, the algorithms strictly follow the given Steiner tree and miss optimization opportunities. Finally, dynamic programming causes high running times. We present our new buffer insertion algorithm, Fast Buffering, that overcomes these limitations. It is able to produce results with similar quality to a dynamic programming approach but a much better running time. In addition, we also present improvements to the dynamic programming approach that allows us to push the quality at the expense of a high running time. We have implemented our algorithms as part of the BonnTools physical design optimization suite developed at the Research Institute for Discrete Mathematics in cooperation with IBM. Our implementation deals with all tedious details of a grown real-world chip optimization environment. We have created extensive experimental results on challenging real-world test cases provided by our cooperation partner. Our algorithm can solve about 5.7 million instances per hour