Characterization and Verification Environment for the RD53A Pixel Readout Chip in 65 nm CMOS

The RD53 collaboration is currently designing a large scale prototype pixel readout chip in 65 nm CMOS technology for the phase 2 upgrades at the HL-LHC. The RD53A chip will be available by the end of the year 2017 and will be extensively tested to confirm if the circuit and the architecture make a solid foundation for the final pixel readout chips for the experiments at the HL-LHC. A test and data acquisition system for the RD53A chip is currently under development to perform single-chip and multi-chip module measurements. In addition, the verification of the RD53A design is performed in a dedicated simulation environment. The concept and the implementation of the test and data acquisition system and the simulation environment, which are based on a modular data acquisition and system testing framework, are presented in this work

Enabling fast power integrity transient analysis through parameterized small-signal macromodels

In this paper, we present an automated strategy for extracting behavioral small-signal macromodels of biased nonlinear circuit blocks. We discuss in detail the case study of a Low DropOut (LDO) voltage regulator, which is an essential part of the power distribution network in electronic systems. We derive a compact yet accurate surrogate model of the LDO, which enables fast transient power integrity simulations, including all parasitics due to the specific layout of the LDO realization. The model is parameterized through its DC input voltage and its output current and is thus available as a SPICE netlist. Numerical experiments show that a speedup up to 700X is achieved when replacing the extracted post-layout netlist with the surrogate model, with practically no loss in accuracy

Addressing On-Chip Power Conversion and Dissipation Issues in Many-Core System-on-a-Chip based on Conventional Silicon and Emerging Nanotechnologies

Title from PDF of title page viewed August 27, 2018Dissertation advisor: Masud H ChowdhuryVitaIncludes bibliographical references (pages 158-163)Thesis (Ph.D.)--School of Computing and Engineering and Department of Physics and Astronomy. University of Missouri--Kansas City, 2017Integrated circuits (ICs) are moving towards system-on-a-chip (SOC) designs. SOC allows various small and large electronic systems to be implemented in a single chip. This approach enables the miniaturization of design blocks that leads to high density transistor integration, faster response time, and lower fabrication costs. To reap the benefits of SOC and uphold the miniaturization of transistors, innovative power delivery and power dissipation management schemes are paramount. This dissertation focuses on on-chip integration of power delivery systems and managing power dissipation to increase the lifetime of energy storage elements. We explore this problem from two different angels: On-chip voltage regulators and power gating techniques. On-chip voltage regulators reduce parasitic effects, and allow faster and efficient power delivery for microprocessors. Power gating techniques, on the other hand, reduce the power loss incurred by circuit blocks during standby mode. Power dissipation (Ptotal = Pstatic and Pdynamic) in a complementary metal-oxide semiconductor (CMOS) circuit comes from two sources: static and dynamic. A quadratic dependency on the dynamic switching power and a more than linear dependency on static power as a form of gate leakage (subthreshold current) exist. To reduce dynamic power loss, the supply power should be reduced. A significant reduction in power dissipation occurs when portions of a microprocessor operate at a lower voltage level. This reduction in supply voltage is achieved via voltage regulators or converters. Voltage regulators are used to provide a stable power supply to the microprocessor. The conventional off-chip switching voltage regulator contains a passive floating inductor, which is difficult to be implemented inside the chip due to excessive power dissipation and parasitic effects. Additionally, the inductor takes a very large chip area while hampering the scaling process. These limitations make passive inductor based on-chip regulator design very unattractive for SOC integration and multi-/many-core environments. To circumvent the challenges, three alternative techniques based on active circuit elements to replace the passive LC filter of the buck convertor are developed. The first inductorless on-chip switching voltage regulator architecture is based on a cascaded 2nd order multiple feedback (MFB) low-pass filter (LPF). This design has the ability to modulate to multiple voltage settings via pulse with modulation (PWM). The second approach is a supplementary design utilizing a hybrid low drop-out scheme to lower the output ripple of the switching regulator over a wider frequency range. The third design approach allows the integration of an entire power management system within a single chipset by combining a highly efficient switching regulator with an intermittently efficient linear regulator (area efficient), for robust and highly efficient on-chip regulation. The static power (Pstatic) or subthreshold leakage power (Pleak) increases with technology scaling. To mitigate static power dissipation, power gating techniques are implemented. Power gating is one of the popular methods to manage leakage power during standby periods in low-power high-speed IC design. It works by using transistor based switches to shut down part of the circuit block and put them in the idle mode. The efficiency of a power gating scheme involves minimum Ioff and high Ion for the sleep transistor. A conventional sleep transistor circuit design requires an additional header, footer, or both switches to turn off the logic block. This additional transistor causes signal delay and increases the chip area. We propose two innovative designs for next generation sleep transistor designs. For an above threshold operation, we present a sleep transistor design based on fully depleted silicon-on-insulator (FDSOI) device. For a subthreshold circuit operation, we implement a sleep transistor utilizing the newly developed silicon-on ferroelectric-insulator field effect transistor (SOFFET). In both of the designs, the ability to control the threshold voltage via bias voltage at the back gate makes both devices more flexible for sleep transistors design than a bulk MOSFET. The proposed approaches simplify the design complexity, reduce the chip area, eliminate the voltage drop by sleep transistor, and improve power dissipation. In addition, the design provides a dynamically controlled Vt for times when the circuit needs to be in a sleep or switching mode.Introduction -- Background and literature review -- Fully integrated on-chip switching voltage regulator -- Hybrid LDO voltage regulator based on cascaded second order multiple feedback loop -- Single and dual output two-stage on-chip power management system -- Sleep transistor design using double-gate FDSOI -- Subthreshold region sleep transistor design -- Conclusio

CMOS Design of Reconfigurable SoC Systems for Impedance Sensor Devices

La rápida evolución en el campo de los sensores inteligentes, junto con los avances en las tecnologías de la computación y la comunicación, está revolucionando la forma en que recopilamos y analizamos datos del mundo físico para tomar decisiones, facilitando nuevas soluciones que desempeñan tareas que antes eran inconcebibles de lograr.La inclusión en un mismo dado de silicio de todos los elementos necesarios para un proceso de monitorización y actuación ha sido posible gracias a los avances en micro (y nano) electrónica. Al mismo tiempo, la evolución de las tecnologías de procesamiento y micromecanizado de superficies de silicio y otros materiales complementarios ha dado lugar al desarrollo de sensores integrados compatibles con CMOS, lo que permite la implementación de matrices de sensores de alta densidad. Así, la combinación de un sistema de adquisición basado en sensores on-Chip, junto con un microprocesador como núcleo digital donde se puede ejecutar la digitalización de señales, el procesamiento y la comunicación de datos proporciona características adicionales como reducción del coste, compacidad, portabilidad, alimentación por batería, facilidad de uso e intercambio inteligente de datos, aumentando su potencial número de aplicaciones.Esta tesis pretende profundizar en el diseño de un sistema portátil de medición de espectroscopía de impedancia de baja potencia operado por batería, basado en tecnologías microelectrónicas CMOS, que pueda integrarse con el sensor, proporcionando una implementación paralelizable sin incrementar significativamente el tamaño o el consumo, pero manteniendo las principales características de fiabilidad y sensibilidad de un instrumento de laboratorio. Esto requiere el diseño tanto de la etapa de gestión de la energía como de las diferentes celdas que conforman la interfaz, que habrán de satisfacer los requisitos de un alto rendimiento a la par que las exigentes restricciones de tamaño mínimo y bajo consumo requeridas en la monitorización portátil, características que son aún más críticas al considerar la tendencia actual hacia matrices de sensores.A nivel de celdas, se proponen diferentes circuitos en un proceso CMOS de 180 nm: un regulador de baja caída de voltaje como unidad de gestión de energía, que proporciona una alimentación de 1.8 V estable, de bajo ruido, precisa e independiente de la carga para todo el sistema; amplificadores de instrumentación con una aproximación completamente diferencial, que incluyen una etapa de entrada de voltaje/corriente configurable, ganancia programable y ancho de banda ajustable, tanto en la frecuencia de corte baja como alta; un multiplicador para conformar la demodulación dual, que está embebido en el amplificador para optimizar consumo y área; y filtros pasa baja totalmente integrados, que actúan como extractores de magnitud de DC, con frecuencias de corte ajustables desde sub-Hz hasta cientos de Hz.<br /

Re-thinking Analog Integrated Circuits in Digital Terms: A New Design Concept for the IoT Era

A steady trend towards the design of mostly-digital and digital-friendly analog circuits, suitable to integration in mainstream nanoscale CMOS by a highly automated design flow, has been observed in the last years to address the requirements of the emerging Internet of Things (IoT) applications. In this context, this tutorial brief presents an overview of concepts and design methodologies that emerged in the last decade, aimed to the implementation of analog circuits like Operational Transconductance Amplifiers, Voltage References and Data Converters by digital circuits. The current design challenges and application scenarios as well as the future perspectives and opportunities in the field of digital-based analog processing are finally discussed

Synthesizable delay line architectures for digitally controlled voltage regulators

Voltage regulators used in the integrated circuit (IC) industry require precise voltage regulation. In digitally controlled switching converters, this precise voltage regulation is achieved by high resolution digital pulse width modulators (DPWM). Digital delay lines can be used to generate the pulse width modulation (PWM) signal. Conventional delay lines are designed in a full custom design methodology which is extremely slow and expensive compared to register-transfer level (RTL) based designs; also RTL based designs are technology independent so the same design can be used with new technologies. The purpose of this work is to introduce a new architecture for the fully synthesizable digital delay line used in digitally controlled voltage regulators. A comparison between the proposed scheme and the conventional delay line is done post synthesis on the key delay line specifications like linearity, area, complexity, and compensation for process, voltage, and temperature (PVT) variations for multiple clock frequencies. Both schemes are designed using a hardware description language (HDL) and synthesized using Intel 32nm technology. The comparison showed that the proposed architecture has better linearity, area, and also it has a fast calibration time with respect to conventional delay lines. The delay lines are designed in parameterized way in order to make the design suitable for multiple frequencies

On-chip Voltage Regulator– Circuit Design and Automation

Title from PDF of title page viewed May 24, 2021Dissertation advisors: Masud H Chowdhury and Yugyung LeeVitaIncludes bibliographical references (page 106-121)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City, 2021With the increase of density and complexity of high-performance integrated circuits and systems, including many-core chips and system-on-chip (SoC), it is becoming difficult to meet the power delivery and regulation requirements with off-chip regulators. The off-chip regulators become a less attractive choice because of the higher overheads and complexity imposed by the additional wires, pins, and pads. The increased I2R loss makes it challenging to maintain the integrity of different voltage domains under a lower supply voltage environment in the smaller technology nodes. Fully integrated on-chip voltage regulators have proven to be an effective solution to mitigate power delivery and integrity issues. Two types of regulators are considered as most promising for on-chip implementation: (i) the low-drop-out (LDO) regulator and (ii) the switched-capacitor (SC)regulator. The first part of our research mainly focused on the LDO regulator. Inspired by the recent surge of interest for cap-less voltage regulators, we presented two fully on-chip external capacitor-less low-dropout voltage regulator design. The second part of this proposal explores the complexity of designing each block of the regulator/analog circuit and proposed a design methodology for analog circuit synthesis using simulation and learning-based approach. As the complexity is increasing day-by-day in an analog circuit, hierarchical flow mostly uses for design automation. In this work, we focused mainly on Circuit-level, one of the significant steps in the flow. We presented a novel, efficient circuit synthesis flow based on simulation and learning-based optimization methods. The proposed methodology has two phases: the learning phase and the evaluation phase. Random forest, a supervised learning is used to reduce the sample points in the design space and iteration number during the learning phase. Additionally, symmetric constraints are used further to reduce the iteration number during the sizing process. We introduced a three-step circuit synthesis flow to automate the analog circuit design. We used H-spice as a simulation tool during the evaluation phase of the proposed methodology. The three most common analog circuits are chosen: single-stage differential amplifier, operational transconductance amplifier, and two-stage differential amplifier to verify the algorithm. The tool is developed in Python, and the technology we used is0.6um. We also verified the optimized result in Cadence Virtuoso.Introduction -- On-chip power delivery system -- Fundamentals of on-chip voltage regulator -- LDO design in 45NM technology -- LDO design in technology -- Analog design automation -- Proposed analog design methodology -- Energy efficient FDSOI and FINFET based power gating circuit using data retention transistor -- Conclusion and future wor

Distributed IC Power Delivery: Stability-Constrained Design Optimization and Workload-Aware Power Management

ABSTRACT Power delivery presents key design challenges in today’s systems ranging from high performance micro-processors to mobile systems-on-a-chips (SoCs). A robust power delivery system is essential to ensure reliable operation of on-die devices. Nowadays it has become an important design trend to place multiple voltage regulators on-chip in a distributive manner to cope with power supply noise. However, stability concern arises because of the complex interactions be-tween multiple voltage regulators and bulky network of the surrounding passive parasitics. The recently developed hybrid stability theorem (HST) is promising to deal with the stability of such system by efficiently capturing the effects of all interactions, however, large overdesign and hence severe performance degradation are caused by the intrinsic conservativeness of the underlying HST framework. To address such challenge, this dissertation first extends the HST by proposing a frequency-dependent system partitioning technique to substantially reduce the pessimism in stability evaluation. By systematically exploring the theoretical foundation of the HST framework, we recognize all the critical constraints under which the partitioning technique can be performed rigorously to remove conservativeness while maintaining key theoretical properties of the partitioned subsystems. Based on that, we develop an efficient stability-ensuring automatic design flow for large power delivery systems with distributed on-chip regulation. In use of the proposed approach, we further discover new design insights for circuit designers such as how regulator topology, on-chip decoupling capacitance, and the number of integrated voltage regulators can be optimized for improved system tradeoffs between stability and performances. Besides stability, power efficiency must be improved in every possible way while maintaining high power quality. It can be argued that the ultimate power integrity and efficiency may be best achieved via a heterogeneous chain of voltage processing starting from on-board switching voltage regulators (VRs), to on-chip switching VRs, and finally to networks of distributed on-chip linear VRs. As such, we propose a heterogeneous voltage regulation (HVR) architecture encompassing regulators with complimentary characteristics in response time, size, and efficiency. By exploring the rich heterogeneity and tunability in HVR, we develop systematic workload-aware control policies to adapt heterogeneous VRs with respect to workload change at multiple temporal scales to significantly improve system power efficiency while providing a guarantee for power integrity. The proposed techniques are further supported by hardware-accelerated machine learning prediction of non-uniform spatial workload distributions for more accurate HVR adaptation at fine time granularity. Our evaluations based on the PARSEC benchmark suite show that the proposed adaptive 3-stage HVR reduces the total system energy dissipation by up to 23.9% and 15.7% on average compared with the conventional static two-stage voltage regulation using off- and on-chip switching VRs. Compared with the 3-stage static HVR, our runtime control reduces system energy by up to 17.9% and 12.2% on average. Furthermore, the proposed machine learning prediction offers up to 4.1% reduction of system energy

Modeling, Design and Optimization of IC Power Delivery with On-Chip Regulation

As IC technology continues to follow the Moore’s Law, IC designers have been constantly challenged with power delivery issues. While useful power must be reliably delivered to the on-die functional circuits to fulfill the desired functionality and performance, additional power overheads arise due to the loss associated with voltage conversion and parasitic resistance in the metal wires. Hence, one of the key IC power delivery design challenges is to develop voltage conversion/regulation circuits and the corresponding design strategies to provide a guaranteed level of power integrity while achieving high power efficiency and low area overhead. On-chip voltage regulation, a significant ongoing design trend, offers appealing active supply noise suppression close to the loads and is well positioned to address many power delivery challenges. However, to realize the full potential of on-chip voltage regulation requires systemic optimization of and tradeoffs among settling time, steady-state error, power supply noise, power efficiency, stability and area overhead, which are the key focuses of this dissertation. First, we develop new low-dropout voltage regulators (LDOs) that are well optimized for low power applications. To this end, dropout voltage, bias current and speed are important competing design objectives. This dissertation presents new flipped voltage follower (FVF) based topologies of on-chip voltage regulators that handle ultra-fast load transients in nanoseconds while achieving significant improvement on bias current consumption. An active frequency compensation is embedded to achieve high area efficiency by employing a smaller amount of compensation capacitors, the major silicon area contributor. Furthermore, in one of the proposed topologies an auxiliary digital feedback loop is employed in order to lower quiescent power consumption further. Second, coping with supply noise is becoming increasingly more difficult as design complexity grows, which leads to increased spatial and temporal load heterogeneity, and hence larger voltage variations in a given power domain. Addressing this challenge through a distributed methodology wherein multiple voltage regulators are placed across the same voltage domain is particularly promising. This distributive nature allows for even faster suppression of multiple hot spots by the nearby regulators within the power domain and can significantly boost power integrity. Nevertheless, reasoning about the stability of such distributively regulated power networks becomes rather complicated as a result of complex interactions between multiple active regulators and the large passive subnetwork. Coping with this stability challenge requires new theory and stability-ensuring design practice, as targeted by this dissertation. For the first time, we adopt and develop a hybrid stability framework for large power delivery networks with distributed voltage regulation. This framework is local in the sense that both the checking and assurance of network stability can be dealt with on the basis of each individual voltage regulator, leading to feasible design of large power delivery networks that would be computationally impossible otherwise. Accordingly, we propose a new hybrid stability margin concept, examine its tradeoffs with power efficiency, supply noise and silicon area, and demonstrate the resulted key design implications pertaining to new stability-ensuring LDO circuit design techniques and circuit topologies. Finally, we develop an automated hybrid stability design flow that is computationally efficient and provides a practical guarantee of network stability

Fast LDO Simulations via Parameter-Varying Linearized Macromodels

An approach for generating time-varying linearized macromodels of analog circuit blocks is presented. These models can be used to perform fast small-signal analyses characterized by nonstationary operating conditions, thanks to their certified stability. We validate the proposed approach by performing post-layout simulations of a Low DropOut (LDO) voltage regulator, in view of power integrity assessment applications