A VHDL-AMS Simulation Environment for an UWB Impulse Radio Transceiver

Ultra-Wide-Band (UWB) communication based on the impulse radio paradigm is becoming increasingly popular. According to the IEEE 802.15 WPAN Low Rate Alternative PHY Task Group 4a, UWB will play a major role in localization applications, due to the high time resolution of UWB signals which allow accurate indirect measurements of distance between transceivers. Key for the successful implementation of UWB transceivers is the level of integration that will be reached, for which a simulation environment that helps take appropriate design decisions is crucial. Owing to this motivation, in this paper we propose a multiresolution UWB simulation environment based on the VHDL-AMS hardware description language, along with a proper methodology which helps tackle the complexity of designing a mixed-signal UWB System-on-Chip. We applied the methodology and used the simulation environment for the specification and design of an UWB transceiver based on the energy detection principle. As a by-product, simulation results show the effectiveness of UWB in the so-called ranging application, that is the accurate evaluation of the distance between a couple of transceivers using the two-way-ranging metho

Highly efficient impulse-radio ultra-wideband cavity-backed slot antenna in stacked air-filled substrate integrated waveguide technology

An impulse-radio ultra-wideband (IR-UWB) cavity-backed slot antenna covering the [5.9803; 6.9989] GHz frequency band of the IEEE 802.15.4a-2011 standard is designed and implemented in an air-filled substrate integrated waveguide (AFSIW) technology for localization applications with an accuracy of at least 3 cm. By relying on both frequency and time-domain optimization, the antenna achieves excellent IR-UWB characteristics. In free-space conditions, an impedance bandwidth of 1.92 GHz (or 29.4%), a total efficiency higher than 89%, a front-to-back ratio of at least 12.1 dB, and a gain higher than 6.3 dBi are measured in the frequency domain. Furthermore, a system fidelity factor larger than 98% and a relative group delay smaller than 100 ps are measured in the time domain within the 3 dB beamwidth of the antenna. As a result, the measured time-of-arrival of a transmitted Gaussian pulse, for different angles of arrival, exhibits variations smaller than 100 ps, corresponding to a maximum distance estimation error of 3 cm. Additionally, the antenna is validated in a real-life worst-case deployment scenario, showing that its characteristics remain stable in a large variety of deployment scenarios. Finally, the difference in frequency-and time-domain performance is studied between the antenna implemented in AFSIW and in dielectric filled substrate integrated waveguide (DFSIW) technology. We conclude that DFSIW technology is less suitable for the envisaged precision IR-UWB localization application

Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

Implementation Aspects of a Transmitted-Reference UWB Receiver

In this paper, we discuss the design issues of an ultra wide band (UWB) receiver targeting a single-chip CMOS implementation for low data-rate applications like ad hoc wireless sensor networks. A non-coherent transmitted reference (TR) receiver is chosen because of its small complexity compared to other architectures. After a brief recapitulation of the UWB fundamentals and a short discussion on the major differences between coherent and non-coherent receivers, we discuss issues, challenges and possible design solutions. Several simulation results obtained by means of a behavioral model are presented, together with an analysis of the trade-off between performance and complexity in an integrated circuit implementation

Ultra-Wideband CMOS Transceiver Front-End for Bio-Medical Radar Sensing

Since the Federal Communication Commission released the unlicensed 3.1-10.6 GHz frequency band for commercial use in early 2002, the ultra wideband (UWB) has developed from an emerging technology into a mainstream research area. The UWB technology, which utilizes wide spectrum, opens a new era of possibility for practical applications in radar sensing, one of which is the human vital sign monitoring. The aim of this thesis is to study and research the possibility of a new generation humanrespiration monitoring sensor using UWB radar technology and to develop a new prototype of UWB radar sensor for system-on-chip solutions in CMOS technology. In this thesis, a lowpower Gaussian impulse UWB mono-static radar transceiver architecture is presented. The UWB Gaussian pulse transmitter and receiver are implemented and fabricated using 90nm CMOS technology. Since the energy of low order Gaussian pulse is mostly condensed at lower frequency, in order to transmit the pulse in a very efficient way, higher order Gaussian derivative pulses are desired as the baseband signal. This motivates the advancement of the design into UWB high-order pulse transmitter. Both the Gaussian impulse UWB transmitter and Gaussian higher-order impulse UWB transmitter take the low-power and high-speed advantage of digital circuit to generate different waveforms. The measurement results are analyzed and discussed. This thesis also presents a low-power UWB mono-static radar transceiver architecture exploiting the full benefit of UWB bandwidth in radar sensing applications. The transceiver includes a full UWB band transmitter, an UWB receiver front-end, and an on-chip diplexer. The non-coherent UWB transmitter generates pulse modulated baseband signals at different carrier frequencies within the designated 3-10 GHz band using a digitally controlled pulse generator. The test shows the proposed radar transceiver can detect the human respiration pattern within 50 cm distance. The applications of this UWB radar sensing solution in commercialized standard CMOS technology include constant breathing pattern monitoring for gated radiation therapy, realtime monitoring of patients, and any other breathing monitoring. The research paves the way to wireless technology integration with health care and bio-sensor network

Architectures and Novel Functionalities for Optical Access OFDM Networks "Arquitecturas y Nuevas Funcionalidades para Redes OFDM de Acceso Óptico"

En los últimos años ha habido un gran aumento en el despliegue de redes de acceso ópticas de fibra hasta el hogar (FTTH, del inglés fibre-to-the home). FTTH es una solución flexible, una tecnología de acceso de futuro que permite proporcionar tasas de datos del orden de Gbit/s por ususario. Diversos estudios indican que FTTH se convertirá en la diferencia clave entre los operadores más importantes. Además, FTTH es la única tecnolotgía capaz de crear nuevas fuentes de ingresos de aplicaciones de alta velocidad, como por ejemple entretenimiento de alta definición (vído y juegos de alta definición...) Dede el punto de vista del operador, una de las vientajas importantes que proporciona FTTH es que permite una mayor eficiencia operativa en coparción con otras tecnologías de acceso, principalmente por la reducción de costes de mantenimiento y de operación. Además, FTTH reduce los requisitos de los equipos de las centrales. Esta tesis doctoral tiene como ojetivo extender estas ventajas más allá del concepto FTTH mediante la integración de la red óptica de distribución desplegada dentro del hogar así como el enlace radio final de corto o medio alcance inalámbrico. Esto proporciona una arquitctura de red FFTH integrada de extremo a extremo. De este modo, los beneficios de la reducción de costes operativos y mayor eficiencia se extienden hasta el usuario final de la red. En esta tesis doctoral, se propone una arqutectura de acceso integrada óptica-radio basada en la multiplexación por división ortogonal de fecuencia (OFDM, del inglés orthogonal frequency división multiplexing) para proporcionar diferentes servicios al usuario como Internet, teléfono/voz, televisión de lata definición, conexión inalámbrica y seguridad en el hogar. Las señales OFDM se utilizan en muchos estándares inalámbricos como las señales de banda ultraancha (UWB, del inglés ultra-wide band), WiMAX, LTE, WLAN, DVB-T o DAB. Estos formatos aprovechan las características intrínsecas de la modulación OFDM como su mayor inmunidad ante desvanecimiento multi-camino. Esta tesis incluye la propuesta y la demostración experimental de la transmisión simultánea y bi-direccional de señales OFDM multi-estándar en radio-sobre-fibra proporcionando servicios triple-play basados en OFDM como UWB para televisión de alta definición, WiMAX para datos de Internet, y LTE para el servicio telefónico.Morant Perez, M. (2012). Architectures and Novel Functionalities for Optical Access OFDM Networks "Arquitecturas y Nuevas Funcionalidades para Redes OFDM de Acceso Óptico" [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/15076Palanci

Design and Development of a Compact and Vialess Microstrip Ultra-Wideband Bandpass Filter

In radio frequency and microwave systems, filters are the most essential component to select the required signals. They are built together with other components such as mixers, amplifiers, oscillators and switches. Filters work by blocking the unwanted signals and allowing the desired signals through them before feeding it into other components or devices. In the latest interest and future radio frequency and microwave high speed communication technology like Ultra-Wideband (UWB), a bandpass filter with large bandwidth (> 500 MHz) is required to fulfill the specifications. This is due to the UWB format signal which uses very short time pulse wave within 1.0 ns to 0.1 ns. This thesis presents theories, methods, parameters, simulations and measurements of designed and development of bandpass filters to support UWB communication systems. There are four types of bandpass filters which are designed and developed to operate within 3.1 GHz to 10.6 GHz to support the UWB frequency range specification.Initially, the designed model is derived from J-inverter which it is a transformation of low pass to bandpass Chebyshev filter. Type of response is chebyshev since it is able to perform an equal-ripple return loss response in the whole passband. The equal-ripple return loss response can keep the insertion loss almost flat in the whole pass band and sharp-out-of-band rejection response. In the thesis, bandpass filters are designed and developed based on five poles quarterwavelength short-circuited stubs model. The model is theoretically capable to expand the frequency bandwidth by tuning its h (interior admittance level of the stubs) factor. The related mathematical equations are applied into mathematical software to speed up the optimization of h factor and obtain the required admittance level for stubs and transmission lines. The first bandpass filter has successfully shown the expansion in frequency bandwidth to support Ultra-wideband specifications. The filter uses five vias to short-circuit stubs to the ground. Stubs, transmission lines admittance and h are tuned slightly to expand the fractional bandwidth (FBW) more than 100 %. The measured scattering parameters are |S21| = 1.27 dB and S11 = -7.8 dB respectively. The second bandpass filter is improved by reducing the short-circuited via elements. First and second stubs are shared on the first via while fourth and fifth stubs share on the third via. Only third stub has its own via thus creating new transformation filter shape nicknamed as “Butterfly”. This new shaped has 109 % of measured fractional bandwidth, lower scattering parameters |S21| which is below than 0.85 dB and S11 is better than -11.6 dB. Besides, it also reduces the number of via insertion in microstrip fabrication process.The third bandpass filter has totally eliminates vias and thus simplifies the microstrip fabrication process. Vias are replaced by microstrip patched capacitors. At microwave frequencies, these capacitors are parasitic elements and their parameters contribute to the successful performance in S-parameters measurement. The measured scattering parameters |S21| and S11 are better than 1 dB and -16.9 dB respectively. The fourth filter is improved in terms of scale dimension and group delay compares to the third filter. The structure is via-less and the filter uses less microstrip patch capacitors to perform compact size with “Butterfly” shape. By reducing microstrip patched capacitors, the filter shows better S-parameters measurements in the UWB passband with the lowest scattering parameters |S21| 0.53 dB and S11 of -14.8 dB. The group delay varies minimum within 0.47 ns in the whole UWB pass band