Optimization of 5G Second Phase Heterogeneous Radio Access Networks with Small Cells

Due to the exponential increase in high data-demanding applications and their services per coverage area, it is becoming challenging for the existing cellular network to handle the massive sum of users with their demands. It is conceded to network operators that the current wireless network may not be capable to shelter future traffic demands. To overcome the challenges the operators are taking interest in efficiently deploying the heterogeneous network. Currently, 5G is in the commercialization phase. Network evolution with addition of small cells will develop the existing wireless network with its enriched capabilities and innovative features. Presently, the 5G global standardization has introduced the 5G New Radio (NR) under the 3rd Generation Partnership Project (3GPP). It can support a wide range of frequency bands (<6 GHz to 100 GHz). For different trends and verticals, 5G NR encounters, functional splitting and its cost evaluation are well-thought-out. The aspects of network slicing to the assessment of the business opportunities and allied standardization endeavours are illustrated. The study explores the carrier aggregation (Pico cellular) technique for 4G to bring high spectral efficiency with the support of small cell massification while benefiting from statistical multiplexing gain. One has been able to obtain values for the goodput considering CA in LTE-Sim (4G), of 40 Mbps for a cell radius of 500 m and of 29 Mbps for a cell radius of 50 m, which is 3 times higher than without CA scenario (2.6 GHz plus 3.5 GHz frequency bands). Heterogeneous networks have been under investigation for many years. Heterogeneous network can improve users service quality and resource utilization compared to homogeneous networks. Quality of service can be enhanced by putting the small cells (Femtocells or Picocells) inside the Microcells or Macrocells coverage area. Deploying indoor Femtocells for 5G inside the Macro cellular network can reduce the network cost. Some service providers have started their solutions for indoor users but there are still many challenges to be addressed. The 5G air-simulator is updated to deploy indoor Femto-cell with proposed assumptions with uniform distribution. For all the possible combinations of apartments side length and transmitter power, the maximum number of supported numbers surpassed the number of users by more than two times compared to papers mentioned in the literature. Within outdoor environments, this study also proposed small cells optimization by putting the Pico cells within a Macro cell to obtain low latency and high data rate with the statistical multiplexing gain of the associated users. Results are presented 5G NR functional split six and split seven, for three frequency bands (2.6 GHz, 3.5GHz and 5.62 GHz). Based on the analysis for shorter radius values, the best is to select the 2.6 GHz to achieve lower PLR and to support a higher number of users, with better goodput, and higher profit (for cell radius u to 400 m). In 4G, with CA, from the analysis of the economic trade-off with Picocell, the Enhanced multi-band scheduler EMBS provide higher revenue, compared to those without CA. It is clearly shown that the profit of CA is more than 4 times than in the without CA scenario. This means that the slight increase in the cost of CA gives back more than 4-time profit relatively to the ”without” CA scenario.Devido ao aumento exponencial de aplicações/serviços de elevado débito por unidade de área, torna-se bastante exigente, para a rede celular existente, lidar com a enormes quantidades de utilizadores e seus requisitos. É reconhecido que as redes móveis e sem fios atuais podem não conseguir suportar a procura de tráfego junto dos operadores. Para responder a estes desafios, os operadores estão-se a interessar pelo desenvolvimento de redes heterogéneas eficientes. Atualmente, a 5G está na fase de comercialização. A evolução destas redes concretizar-se-á com a introdução de pequenas células com aptidões melhoradas e características inovadoras. No presente, os organismos de normalização da 5G globais introduziram os Novos Rádios (NR) 5G no contexto do 3rd Generation Partnership Project (3GPP). A 5G pode suportar uma gama alargada de bandas de frequência (<6 a 100 GHz). Abordam-se as divisões funcionais e avaliam-se os seus custos para as diferentes tendências e verticais dos NR 5G. Ilustram-se desde os aspetos de particionamento funcional da rede à avaliação das oportunidades de negócio, aliadas aos esforços de normalização. Exploram-se as técnicas de agregação de espetro (do inglês, CA) para pico células, em 4G, a disponibilização de eficiência espetral, com o suporte da massificação de pequenas células, e o ganho de multiplexagem estatística associado. Obtiveram-se valores do débito binário útil, considerando CA no LTE-Sim (4G), de 40 e 29 Mb/s para células de raios 500 e 50 m, respetivamente, três vezes superiores em relação ao caso sem CA (bandas de 2.6 mais 3.5 GHz). Nas redes heterogéneas, alvo de investigação há vários anos, a qualidade de serviço e a utilização de recursos podem ser melhoradas colocando pequenas células (femto- ou pico-células) dentro da área de cobertura de micro- ou macro-células). O desenvolvimento de pequenas células 5G dentro da rede com macro-células pode reduzir os custos da rede. Alguns prestadores de serviços iniciaram as suas soluções para ambientes de interior, mas ainda existem muitos desafios a ser ultrapassados. Atualizou-se o 5G air simulator para representar a implantação de femto-células de interior com os pressupostos propostos e distribuição espacial uniforme. Para todas as combinações possíveis do comprimento lado do apartamento, o número máximo de utilizadores suportado ultrapassou o número de utilizadores suportado (na literatura) em mais de duas vezes. Em ambientes de exterior, propuseram-se pico-células no interior de macro-células, de forma a obter atraso extremo-a-extremo reduzido e taxa de transmissão dados elevada, resultante do ganho de multiplexagem estatística associado. Apresentam-se resultados para as divisões funcionais seis e sete dos NR 5G, para 2.6 GHz, 3.5GHz e 5.62 GHz. Para raios das células curtos, a melhor solução será selecionar a banda dos 2.6 GHz para alcançar PLR (do inglês, PLR) reduzido e suportar um maior número de utilizadores, com débito binário útil e lucro mais elevados (para raios das células até 400 m). Em 4G, com CA, da análise do equilíbrio custos-proveitos com pico-células, o escalonamento multi-banda EMBS (do inglês, Enhanced Multi-band Scheduler) disponibiliza proveitos superiores em comparação com o caso sem CA. Mostra-se claramente que lucro com CA é mais de quatro vezes superior do que no cenário sem CA, o que significa que um aumento ligeiro no custo com CA resulta num aumento de 4-vezes no lucro relativamente ao cenário sem CA

Enabling Green Energy awareness in Interactive Cloud Application

International audienceWith the proliferation of Cloud computing, data centers have to urgently face energy consumption issues. Although recent efforts such as the integration of renewable energy to data centers or energy efficient techniques in (virtual) machines contribute to the reduction of carbon footprint, creating green energy awareness around Interactive Cloud Applications by smartly using the presence of green energy has not been yet addressed. By awareness, we mean the inherited capability of Software-as-a-Service applications to dynamically adapt with the availability of green energy and to reduce energy consumption while green energy is scarce or absent. In this paper, we present two application controllers based on different metrics (e.g., availability of green energy, response time, user experience level). Based on extensive experiments with a real application benchmark and workloads in Grid'5000, results suggest that providers revenue can be increased as high as 64%, while 13% brown energy can be reduced without deprovisioning any physical or virtual resources at IaaS layer and 17 fold increment of performance can be guaranteed

A Markovian Approach to Multipath Data Transfer in Overlay Networks

n/

Supporting Sustainable Virtual Network Mutations with Mystique

The abiding attempt of automation has also permeated the networks, with the ability to measure, analyze, and control themselves in an automated manner, by reacting to changes in the environment (e.g., demand). When provided with these features, networks are often labeled as "self-driving" or "autonomous". In this regard, the provision and orchestration of physical or virtual resources are crucial for both Quality of Service (QoS) guarantees and cost management in the edge/cloud computing environment. To effectively manage the lifecycle of these resources, an auto-scaling mechanism is essential. However, traditional threshold-based and recent Machine Learning (ML)-based policies are often unable to address the soaring complexity of networks due to their centralized approach. By relying on multi-agent reinforcement learning, we propose Mystique, a solution that learns from the load on links to establish the minimal set of active network resources. As traffic demands ebb and flow, our adaptive and self-driving solution can scale up and down and also react to failures in a fully automated, flexible, and efficient manner. Our results demonstrate that the presented solution can reduce network energy consumption while providing an adequate service level, outperforming other benchmark auto-scaling approaches

Predictive performance modeling and simulation

The purpose of this thesis was to create and simulate a model of an existing Campus network with a view to predict future performance. This thesis also suggests ways in which such a network can be optimized. Such simulation and modeling can be referred to as Predictive Performance Modeling\u27. In this research a model of Florida International University (University Park campus) High Speed Network was created. Simulation of the model was carried out and an ATM Backbone Analysis was done. The results obtained were compared with corresponding results obtained by network performance monitoring and measurement software tools. A strong correlation between measured and simulation results were observed. A more detailed model was also created for the Engineering and Applied Science (EAS) Local Area Network. Various performance parameters results were collected and analyzed. Based on simulated results, predictions were made in regards to the scalability and optimization of this network in light of expected future requirements

Optimal Resource Allocation with Delay Guarantees for Network Slicing in Disaggregated RAN

In this article, we propose a novel formulation for the resource allocation problem of a sliced and disaggregated Radio Access Network (RAN) and its transport network. Our proposal assures an end-to-end delay bound for the Ultra-Reliable and Low-Latency Communication (URLLC) use case while jointly considering the number of admitted users, the transmission rate allocation per slice, the functional split of RAN nodes and the routing paths in the transport network. We use deterministic network calculus theory to calculate delay along the transport network connecting disaggregated RANs deploying network functions at the Radio Unit (RU), Distributed Unit (DU), and Central Unit (CU) nodes. The maximum end-to-end delay is a constraint in the optimization-based formulation that aims to maximize Mobile Network Operator (MNO) profit, considering a cash flow analysis to model revenue and operational costs using data from one of the world's leading MNOs. The optimization model leverages a Flexible Functional Split (FFS) approach to provide a new degree of freedom to the resource allocation strategy. Simulation results reveal that, due to its non-linear nature, there is no trivial solution to the proposed optimization problem formulation. Our proposal guarantees a maximum delay for URLLC services while satisfying minimal bandwidth requirements for enhanced Mobile BroadBand (eMBB) services and maximizing the MNO's profit.Comment: 21 pages, 10 figures. For the associated GitHub repository, see https://github.com/LABORA-INF-UFG/paper-FGKCJ-202

Prediction of Quality of Experience for Video Streaming Using Raw QoS Parameters

Along with the rapid growth in consumer adoption of modern portable devices, video streaming is expected to dominate a large share of the global Internet traffic in the near future. Today user experience is becoming a reliable indicator for video service providers and telecommunication operators to convey overall end-to-end system functioning. Towards this, there is a profound need for an efficient Quality of Experience (QoE) monitoring and prediction. QoE is a subjective metric, which deals with user perception and can vary due to the user expectation and context. However, available QoE measurement techniques that adopt a full reference method are impractical in real-time transmission since they require the original video sequence to be available at the receiver’s end. QoE prediction, however, requires a firm understanding of those Quality of Service (QoS) factors that are the most influential on QoE. The main aim of this thesis work is the development of novel and efficient models for video quality prediction in a non-intrusive way and to demonstrate their application in QoE-enabled optimisation schemes for video delivery. In this thesis, the correlation between QoS and QoE is utilized to objectively estimate the QoE. For this, both objective and subjective methods were used to create datasets that represent the correlation between QoS parameters and measured QoE. Firstly, the impact of selected QoS parameters from both encoding and network levels on video QoE is investigated. The obtained QoS/QoE correlation is backed by thorough statistical analysis. Secondly, the development of two novel hybrid non-reference models for predicting video quality using fuzzy logic inference systems (FIS) as a learning-based technique. Finally, attention was move onto demonstrating two applications of the developed FIS prediction model to show how QoE is used to optimise video delivery

Performance Analysis in IP-Based Industrial Communication Networks

S rostoucím počtem řídicích systémů a jejich distribuovanosti získávájí komunikační sítě na důležitosti a objevují se nové výzkumné trendy. Hlavní problematikou v této oblasti, narozdíl od dřívějších řídicích systémů využívajících dedikovaných komunikačních obvodů, je časově proměnné zpoždění měřicích a řídicích signálů způsobené paketově orientovanými komunikačními prostředky, jako např. Ethernet. Aspekty komunikace v reálném čase byly v těchto sítích již úspěšně vyřešeny. Nicméně, analýzy trendů trhu předpovídají budoucí využití také IP sítí v průmyslové komunikaci pro časově kritickou procesní vyměnu dat. IP komunikace má ovšem pouze omezenou podporu v instrumentaci pro průmyslovou automatizace. Tato výzva byla nedávno technicky vyřešena v rámci projektu Virtual Automation Networks (virtuální automatizační sítě - VAN) zapojením mechanismů kvality služeb (QoS), které jsou schopny zajistit měkkou úroveň komunikace v reálném čase. Předložená dizertační práce se zaměřuje na aspekty výkonnosti reálného času z analytického hlediska a nabízí prostředek pro hodnocení využitelnosti IP komunikace pro budoucí průmyslové aplikace. Hlavním cílem této dizertační práce je vytvoření vhodného modelovacího rámce založeného na network calculus, který pomůže provést worst-case výkonnostní analýzu časového chování IP komunikačních sítí a jejich prvků určených pro budoucí použití v průmyslové automatizaci. V práci byla použita empirická analýza pro určení dominantních faktorů ovlivňujících časového chování síťových zařízení a identifikaci parametrů modelů těchto zařízení. Empirická analýza využívá nástroj TestQoS vyvinutý pro tyto účely. Byla navržena drobná rozšíření rámce network calculus, která byla nutná pro modelování časového chování používaných zařízení. Bylo vytvořeno několik typových modelů zařízení jako výsledek klasifikace různých architektur síťových zařízení a empiricky zjištěných dominantních faktorů. U modelovaných zařízení byla využita nová metoda identifikace parametrů. Práce je zakončena validací časových modelů dvou síťových zařízení (přepínače a směrovače) oproti empirickým pozorováním.With the growing scale of control systems and their distributed nature, communication networks have been gaining importance and new research challenges have been appearing. The major problem, contrary to previously used control systems with dedicated communication circuits, is time-varying delay of control and measurement signals introduced by packet-switched networks, such as Ethernet. The real-time issues in these networks have been tackled by proper adaptations. Nevertheless, market trend analyses foresee also future adoptions of IP-based communication networks in industrial automation for time-critical run-time data exchange. IP-based communication has only a limited support from the existing instrumentation in industrial automation. This challenge has recently been technically tackled within the Virtual Automation Networks (VAN) project by adopting the quality of service (QoS) architecture delivering soft-real-time communication behaviour. This dissertation focuses on the real-time performance aspects from the analytical point of view and provides means for applicability assessment of IP-based communication for future industrial applications. The main objective of this dissertation is establishment of a relevant modelling framework based on network calculus which will assist worst-case performance analysis of temporal behaviour of IP-based communication networks and networking devices intended for future use in industrial automation. Empirical analysis was used to identify dominant factors influencing the temporal performance of networking devices and for model parameter identification. The empirical analysis makes use of the TestQoS tool developed for this purpose. Minor extensions to the network calculus framework were proposed enabling to model the required temporal behaviour of networking devices. Several exemplary models were inferred as a result of classification of different networking device architectures and empirically identified dominant factors. A novel method for parameter identification was used with the modelled devices. Finally, two temporal models of networking devices (a switch and a router) were validated against empirical observations.

A framework for autonomic web service selection

Web services are a form of distributed computing. As applications accessible over standard internet protocols, web services allow access to disparate computational resources. Recently, with an increased commoditization of web services, there has been a greater interest in the problem of selection. If a web service client can be configured to use one of a number of different web services, which should it select? In this thesis, an approach based on examining the past quality of service (QoS) parameters of similar clients is presented. Standard web service clients are augmented to report their experiences, and can reason over both these and the experiences of others using a number of formal techniques, thereby arriving at an informed decision