Impact of package parasitics on crosstalk in mixed-signal ICs

This paper presents an approach for the analysis and the experimental evaluation of crosstalk effects due to current pulses drawn from voltage supplies in mixed analog-digital CMOS integrated circuits. A realistic model of bonding and package parasitics has been derived to study digital switching noise injected through bonding interconnections. Simulations results indicate that disturbances due to switching currents in digital blocks propagate through the substrate and affect analog voltages, thus degrading circuit performance. Test structures have been integrated into a test chip mounted with different technologies, in order to compare the measurements on test chips. Measurements confirm simulation results. Chip-on-board mounting technology has better performance with respect to chip-in-package, due to the reduction of parasitic elements

Enabling Technologies for 3D ICs: TSV Modeling and Analysis

Through silicon via (TSV) based three-dimensional (3D) integrated circuit (IC) aims to stack and interconnect dies or wafers vertically. This emerging technology offers a promising near-term solution for further miniaturization and the performance improvement of electronic systems and follows a more than Moore strategy. Along with the need for low-cost and high-yield process technology, the successful application of TSV technology requires further optimization of the TSV electrical modeling and design. In the millimeter wave (mmW) frequency range, the root mean square (rms) height of the TSV sidewall roughness is comparable to the skin depth and hence becomes a critical factor for TSV modeling and analysis. The impact of TSV sidewall roughness on electrical performance, such as the loss and impedance alteration in the mmW frequency range, is examined and analyzed following the second order small perturbation method. Then, an accurate and efficient electrical model for TSVs has been proposed considering the TSV sidewall roughness effect, the skin effect, and the metal oxide semiconductor (MOS) effect. However, the emerging application of 3D integration involves an advanced bio-inspired computing system which is currently experiencing an explosion of interest. In neuromorphic computing, the high density membrane capacitor plays a key role in the synaptic signaling process, especially in a spike firing analog implementation of neurons. We proposed a novel 3D neuromorphic design architecture in which the redundant and dummy TSVs are reconfigured as membrane capacitors. This modification has been achieved by taking advantage of the metal insulator semiconductor (MIS) structure along the sidewall, strategically engineering the fixed oxide charges in depletion region surrounding the TSVs, and the addition of oxide layer around the bump without changing any process technology. Without increasing the circuit area, these reconfiguration of TSVs can result in substantial power consumption reduction and a significant boost to chip performance and efficiency. Also, depending on the availability of the TSVs, we proposed a novel CAD framework for TSV assignments based on the force-directed optimization and linear perturbation

Thermal Investigations Of Flip Chip Microelectronic Package With Non-Uniform Power Distribution [TK7874. G614 2004 f rb] [Microfiche 7607].

Arah aliran pempakejan sistem-sistem dan subsistem mikroelektronik adalah kearah pengurangan saiz dan peningkatan prestasi, di mana kedua-duanya menyumbang kepada peningkatan kadar penjanaan haba. The trend in packaging microelectronic systems and subsystems has been to reduce size and increase performance, both of which contribute to increase heat generation

Signal and Power Integrity Challenges for High Density System-on-Package

As the increasing desire for more compact, portable devices outpaces Moore’s law, innovation in packaging and system design has played a significant role in the continued miniaturization of electronic systems.Integrating more active and passive components into the package itself, as the case for system-on-package (SoP), has shown very promising results in overall size reduction and increased performance of electronic systems.With this ability to shrink electrical systems comes the many challenges of sustaining, let alone improving, reliability and performance. The fundamental signal, power, and thermal integrity issues are discussed in detail, along with published techniques from around the industry to mitigate these issues in SoP applications

Modeling, design, and characterization of through vias in silicon and glass interposers

Advancements in very large scale integration (VLSI) technology have led to unprecedented transistor and interconnect scaling. Further miniaturization by traditional IC scaling in future planar CMOS technology faces significant challenges. Stacking of ICs (3D IC) using three dimensional (3D) integration technology helps in significantly reducing wiring lengths, interconnect latency and power dissipation while reducing the size of the chip and enhancing performance. Interposer technology with ultra-fine pitch interconnections needs to be developed to support the huge I/O connection requirement for packaging 3D ICs. Through vias in stacked silicon ICs and interposers are the key components of a 3D system. The objective of this dissertation is to model through vias in 3D silicon and glass interposers and, to address power and high-speed signal integrity issues in 3D interposers considering silicon biasing effects. An equivalent circuit model of the through via in silicon interposer (Si TPV) has been proposed considering the bias voltage dependent Metal-Oxide-Semiconductor (MOS) capacitance effect. Important design guidelines and optimizations are proposed for Si TPVs used in the signal delivery network, power delivery network (PDN), and as variable capacitors. Through vias in glass interposers (Glass TPVs) are modeled, designed and simulated by using electromagnetic field solvers. Signal and power integrity analyses are performed for silicon and glass interposers. PDN design is proposed by utilizing the MOS capacitance of the Si TPVs for decoupling.PhDCommittee Chair: Tummala, Rao; Committee Co-Chair: Swaminathan, Madhavan; Committee Member: Lim, Sung Kyu; Committee Member: Mukhopadhyay, Saibal; Committee Member: Sitaraman, Suresh; Committee Member: Sundaram, Venk

Signaling in 3-D integrated circuits, benefits and challenges

Three-dimensional (3-D) or vertical integration is a design and packaging paradigm that can mitigate many of the increasing challenges related to the design of modern integrated systems. 3-D circuits have recently been at the spotlight, since these circuits provide a potent approach to enhance the performance and integrate diverse functions within amulti-plane stack. Clock networks consume a great portion of the power dissipated in a circuit. Therefore, designing a low-power clock network in synchronous circuits is an important task. This requirement is stricter for 3-D circuits due to the increased power densities. Synchronization issues can be more challenging for 3-D circuits since a clock path can spread across several planes with different physical and electrical characteristics. Consequently, designing low power clock networks for 3-D circuits is an important issue. Resonant clock networks are considered efficient low-power alternatives to conventional clock distribution schemes. These networks utilize additional inductive circuits to reduce power while delivering a full swing clock signal to the sink nodes. In this research, a design method to apply resonant clocking to synthesized clock trees is proposed. Manufacturing processes for 3-D circuits include some additional steps as compared to standard CMOS processes which makes 3-D circuits more susceptible to manufacturing defects and lowers the overall yield of the bonded 3-D stack. Testing is another complicated task for 3-D ICs, where pre-bond test is a prerequisite. Pre-bond testability, in turn, presents new challenges to 3-D clock network design primarily due to the incomplete clock distribution networks prior to the bonding of the planes. A design methodology of resonant 3-D clock networks that support wireless pre-bond testing is introduced. To efficiently address this issue, inductive links are exploited to wirelessly transmit the clock signal to the disjoint resonant clock networks. The inductors comprising the LC tanks are used as the receiver circuit for the links, essentially eliminating the need for additional circuits and/or interconnect resources during pre-bond test. Recent FPGAs are quite complex circuits which provide reconfigurablity at the cost of lower performance and higher power consumption as compared to ASIC circuits. Exploiting a large number of programmable switches, routing structures are mainly responsible for performance degradation in FPAGs. Employing 3-D technology can providemore efficient switches which drastically improve the performance and reduce the power consumption of the FPGA. RRAM switches are one of the most promising candidates to improve the FPGA routing architecture thanks to their low on-resistance and non-volatility. Along with the configurable switches, buffers are the other important element of the FPGAs routing structure. Different characteristics of RRAM switches change the properties of signal paths in RRAM-based FPGAs. The on resistance of RRAMswitches is considerably lower than CMOS pass gate switches which results in lower RC delay for RRAM-based routing paths. This different nature in critical path and signal delay in turn affect the need for intermediate buffers. Thus the buffer allocation should be reconsidered. In the last part of this research, the effect of intermediate buffers on signal propagation delay is studied and a modified buffer allocation scheme for RRAM-based FPGA routing path is proposed