Multicore architecture optimizations for HPC applications

From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics. This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss. Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget. Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP

Multicore architecture optimizations for HPC applications

From single-core CPUs to detachable compute accelerators, supercomputers made a tremendous progress by using available transistors on chip and specializing hardware for a given type of computation. Today, compute nodes used in HPC employ multi-core CPUs tailored for serial execution and multiple accelerators (many-core devices or GPUs) for throughput computing. However, designing next-generation HPC system requires not only the performance improvement but also better energy efficiency. Current trend of reaching exascale level of computation asks for at least an order of magnitude increase in both of these metrics. This thesis explores HPC-specific optimizations in order to make better utilization of the available transistors and to improve performance by transparently executing parallel code across multiple GPU accelerators. First, we analyze several HPC benchmark suites, compare them against typical desktop applications, and identify the differences which advocate for proper core tailoring. Moreover, within the HPC applications, we evaluate serial and parallel code sections separately, resulting in an Asymmetric Chip Multiprocessor (ACMP) design with one core optimized for single-thread performance and many lean cores for parallel execution. Our results presented here suggests downsizing of core front-end structures providing an HPC-tailored lean core which saves 16% of the core area and 7% of power, without performance loss. Further improving an ACMP design, we identify that multiple lean cores run the same code during parallel regions. This motivated us to evaluate the idea where lean cores share the I-cache with the intent of benefiting from mutual prefetching, without increasing the average access latency. Our exploration of the multiple parameters finds the sweet spot on a wide interconnect to access the shared I-cache and the inclusion of a few line buffers to provide the required bandwidth and latency to sustain performance. The projections presented in this thesis show additional 11% area savings with a 5% energy reduction at no performance cost. These area and power savings might be attractive for many-core accelerators either for increasing the performance per area and power unit, or adding additional cores and thus improving the performance for the same hardware budget. Finally, in this thesis we study the effects of future NUMA accelerators comprised of multiple GPU devices. Reaching the limits of a single-GPU die size, next-generation GPU compute accelerators will likely embrace multi-socket designs increasing the core count and memory bandwidth. However, maintaining the UMA behavior of a single-GPU in multi-GPU systems without code rewriting stands as a challenge. We investigate multi-socket NUMA GPU designs and show that significant changes are needed to both the GPU interconnect and cache architectures to achieve performance scalability. We show that application phase effects can be exploited allowing GPU sockets to dynamically optimize their individual interconnect and cache policies, minimizing the impact of NUMA effects. Our NUMA-aware GPU outperforms a single GPU by 1.5×, 2.3×, and 3.2× while achieving 89%, 84%, and 76% of theoretical application scalability in 2, 4, and 8 sockets designs respectively. Implementable today, NUMA-aware multi-socket GPUs may be a promising candidate for performance scaling of future compute nodes used in HPC.Empezando por CPUs de un solo procesador, y pasando por aceleradores discretos, los supercomputadores han avanzado enormemente utilizando todos los transistores disponibles en el chip, y especializando los diseños para cada tipo de cálculo. Actualmente, los nodos de cálculo de un sistema de Computación de Altas Prestaciones (CAP) utilizan CPUs de múltiples procesadores, optimizados para el cálculo serial de instrucciones, y múltiples aceleradores (aceleradores gráficos, o many-core), optimizados para el cálculo paralelo. El diseño de un sistema CAP de nueva generación requiere no solo mejorar el rendimiento de cálculo, sino también mejorar la eficiencia energética. La siguiente generación de sistemas requiere mejorar un orden de magnitud en ambas métricas simultáneamente. Esta tesis doctoral explora optimizaciones específicas para sistemas CAP para hacer un mejor uso de los transistores, y para mejorar las prestaciones de forma transparente ejecutando las aplicaciones en múltiples aceleradores en paralelo. Primero, analizamos varios conjuntos de aplicaciones CAP, y las comparamos con aplicaciones para servidores y escritorio, identificando las principales diferencias que nos indican cómo ajustar la arquitectura para CAP. En las aplicaciones CAP, también analizamos la parte secuencial del código y la parte paralela de forma separada, . El resultado de este análisis nos lleva a proponer una arquitectura multiprocesador asimétrica (ACMP) , con un procesador optimizado para el código secuencial, y múltiples procesadores, más pequeños, optimizados para el procesamiento paralelo. Nuestros resultados muestran que reducir el tamaño de las estructuras del front-end (fetch, y predicción de saltos) en los procesadores paralelos nos proporciona un 16% extra de área en el chip, y una reducción de consumo del 7%. Como mejora a nuestra arquitectura ACMP, proponemos explotar el hecho de que todos los procesadores paralelos ejecutan el mismo código al mismo tiempo. Evaluamos una propuesta en que los procesadores paralelos comparten la caché de instrucciones, con la intención de que uno de ellos precargue las instrucciones para los demás procesadores (prefetching), sin aumentar la latencia media de acceso. Nuestra exploración de los distintos parámetros determina que el punto óptimo requiere una interconexión de alto ancho de banda para acceder a la caché compartida, y el uso de unos pocos line buffers para mantener el ancho de banda y la latencia necesarios. Nuestras proyecciones muestran un ahorro adicional del 11% en área y el 5% en energía, sin impacto en el rendimiento. Estos ahorros de área y energía permiten a un multiprocesador incrementar la eficiencia energética, o aumentar el rendimiento añadiendo procesador adicionales. Por último, estudiamos el efecto de usar múltiples aceleradores (GPU) en una arquitectura con tiempo de acceso a memoria no uniforme (NUMA). Una vez alcanzado el límite de número de transistores y tamaño máximo por chip, la siguiente generación de aceleradores deberá utilizar múltiples chips para aumentar el número de procesadores y el ancho de banda de acceso a memoria. Sin embargo, es muy difícil mantener la ilusión de un tiempo de acceso a memoria uniforme en un sistema multi-GPU sin reescribir el código de la aplicación. Nuestra investigación sobre sistemas multi-GPU muestra retos significativos en el diseño de la interconexión entre las GPU y la jerarquía de memorias cache. Nuestros resultados muestran que se puede explotar el comportamiento en fases de las aplicaciones para optimizar la configuración de la interconexión y las cachés de forma dinámica, minimizando el impacto de la arquitectura NUMA. Nuestro diseño mejora el rendimiento de un sistema con una única GPU en 1.5x, 2.3x y 3.2x (el 89%, 84%, y 76% del máximo teórico) usando 2, 4, y 8 GPUs en paralelo. Siendo su implementación posible hoy en dia, los nodos de cálculo con múltiples aceleradores son una alternativa atractiva para futuros sistemas CAP.Postprint (published version

A Finite Domain Constraint Approach for Placement and Routing of Coarse-Grained Reconfigurable Architectures

Scheduling, placement, and routing are important steps in Very Large Scale Integration (VLSI) design. Researchers have developed numerous techniques to solve placement and routing problems. As the complexity of Application Specific Integrated Circuits (ASICs) increased over the past decades, so did the demand for improved place and route techniques. The primary objective of these place and route approaches has typically been wirelength minimization due to its impact on signal delay and design performance. With the advent of Field Programmable Gate Arrays (FPGAs), the same place and route techniques were applied to FPGA-based design. However, traditional place and route techniques may not work for Coarse-Grained Reconfigurable Architectures (CGRAs), which are reconfigurable devices offering wider path widths than FPGAs and more flexibility than ASICs, due to the differences in architecture and routing network. Further, the routing network of several types of CGRAs, including the Field Programmable Object Array (FPOA), has deterministic timing as compared to the routing fabric of most ASICs and FPGAs reported in the literature. This necessitates a fresh look at alternative approaches to place and route designs. This dissertation presents a finite domain constraint-based, delay-aware placement and routing methodology targeting an FPOA. The proposed methodology takes advantage of the deterministic routing network of CGRAs to perform a delay aware placement

Optimizations and Cost Models for multi-core architectures: an approach based on parallel paradigms

The trend in modern microprocessor architectures is clear: multi-core chips are here to stay, and researchers expect multiprocessors with 128 to 1024 cores on a chip in some years. Yet the software community is slowly taking the path towards parallel programming: while some works target multi-cores, these are usually inherited from the previous tools for SMP architectures, and rarely exploit specific characteristics of multi-cores. But most important, current tools have no facilities to guarantee performance or portability among architectures. Our research group was one of the first to propose the structured parallel programming approach to solve the problem of performance portability and predictability. This has been successfully demonstrated years ago for distributed and shared memory multiprocessors, and we strongly believe that the same should be applied to multi-core architectures. The main problem with performance portability is that optimizations are effective only under specific conditions, making them dependent on both the specific program and the target architecture. For this reason in current parallel programming (in general, but especially with multi-cores) optimizations usually follows a try-and-decide approach: each one must be implemented and tested on the specific parallel program to understand its benefits. If we want to make a step forward and really achieve some form of performance portability, we require some kind of prediction of the expected performance of a program. The concept of performance modeling is quite old in the world of parallel programming; yet, in the last years, this kind of research saw small improvements: cost models to describe multi-cores are missing, mainly because of the increasing complexity of microarchitectures and the poor knowledge of specific implementation details of current processors. In the first part of this thesis we prove that the way of performance modeling is still feasible, by studying the Tilera TilePro64. The high number of cores on-chip in this processor (64) required the use of several innovative solutions, such as a complex interconnection network and the use of multiple memory interfaces per chip. For these features the TilePro64 can be considered an insight of what to expect in future multi-core processors. The availability of a cycle-accurate simulator and an extensive documentation allowed us to model the architecture, and in particular its memory subsystem, at the accuracy level required to compare optimizations In the second part, focused on optimizations, we cover one of the most important issue of multi-core architectures: the memory subsystem. In this area multi-core strongly differs in their structure w.r.t off-chip parallel architectures, both SMP and NUMA, thus opening new opportunities. In detail, we investigate the problem of data distribution over the memory controllers in several commercial multi-cores, and the efficient use of the cache coherency mechanisms offered by the TilePro64 processor. Finally, by using the performance model, we study different implementations, derived from the previous optimizations, of a simple test-case application. We are able to predict the best version using only profiled data from a sequential execution. The accuracy of the model has been verified by experimentally comparing the implementations on the real architecture, giving results within 1 − 2% of accuracy