248 research outputs found
An analytical model for input-buffered optical packet switches with reconfiguration overhead
The overhead associated with reconfiguring a switch fabric in optical packet switches is an important issue in relation to the packet transmission time and can adversely affect switch performance. The reconfiguration overhead increases the mean waiting time of packets and reduces throughput. The scheduling of packets must take into account the reconfiguration frequency. This work proposes an analytical model for input-buffered optical packet switches with the reconfiguration overhead and analytically finds the optimal reconfiguration frequency that minimizes the mean waiting time of packets. The analytical model is suitable for several round-robin (RR) scheduling schemes in which only non-empty virtual output queues (VOQs) are served or all VOQs are served and is used to examine the effects of the RR scheduling schemes and various network parameters on the mean waiting time of packets. Quantitative examples demonstrate that properly balancing the reconfiguration frequency can effectively reduce the mean waiting time of packets
On-board B-ISDN fast packet switching architectures. Phase 2: Development. Proof-of-concept architecture definition report
For the next-generation packet switched communications satellite system with onboard processing and spot-beam operation, a reliable onboard fast packet switch is essential to route packets from different uplink beams to different downlink beams. The rapid emergence of point-to-point services such as video distribution, and the large demand for video conference, distributed data processing, and network management makes the multicast function essential to a fast packet switch (FPS). The satellite's inherent broadcast features gives the satellite network an advantage over the terrestrial network in providing multicast services. This report evaluates alternate multicast FPS architectures for onboard baseband switching applications and selects a candidate for subsequent breadboard development. Architecture evaluation and selection will be based on the study performed in phase 1, 'Onboard B-ISDN Fast Packet Switching Architectures', and other switch architectures which have become commercially available as large scale integration (LSI) devices
Clock Synchronisation Assisted Clock and Data Recovery for Sub-Nanosecond Data Centre Optical Switching
In current `Cloud' data centres, switching of data between servers is performed using deep hierarchies of interconnected electronic packet switches. Demand for network bandwidth from emerging data centre workloads, combined with the slowing of silicon transistor scaling, is leading to a widening gap between data centre traffic demand and electronically-switched data centre network capacity. All-optical switches could offer a future-proof alternative, with potentially under a third of the power consumption and cost of electronically-switched networks. However, the effective bandwidth of optical switches depends on their overall switching time. This is dominated by the clock and data recovery (CDR) locking time, which takes hundreds of nanoseconds in commercial receivers. Current data centre traffic is dominated by small packets that transmit in tens of nanoseconds, leading to low effective bandwidth, as a high proportion of receiver time is spent performing CDR locking instead of receiving data, removing the benefits of optical switching. High-performance optical switching requires sub-nanosecond CDR locking time to overcome this limitation. This thesis proposes, models, and demonstrates clock synchronisation assisted CDR, which can achieve this. This approach uses clock synchronisation to simplify the complexity of CDR versus previous asynchronous approaches. An analytical model of the technique is first derived that establishes its potential viability. Following this, two approaches to clock synchronisation assisted CDR are investigated: 1. Clock phase caching, which uses clock phase storage and regular updates in a 2km intra-building scale data centre network interconnected by single-mode optical fibre. 2. Single calibration clock synchronisation assisted CDR}, which leverages the 20 times lower thermal sensitivity of hollow core optical fibre versus single-mode fibre to synchronise a 100m cluster scale data centre network, with a single initial phase calibration step. Using a real-time FPGA-based optical switch testbed, sub-nanosecond CDR locking time was demonstrated for both approaches
Modeling and Analysis of Fault Tolerant Multistage Interconnection Networks
Performance and reliability are two of the most crucial issues in today\u27s high-performance instrumentation and measurement systems. High speed and compact density multistage interconnection networks (MINs) are widely-used subsystems in different applications. New performance models are proposed to evaluate a novel fault tolerant MIN arrangement, thereby assuring performance and reliability with high confidence level. A concurrent fault detection and recovery scheme for MINs is considered by rerouting over redundant interconnection links under stringent real-time constraints for digital instrumentation as sensor networks. A switch architecture for concurrent testing and diagnosis is proposed. New performance models are developed and used to evaluate the compound effect of fault tolerant operation (inclusive of testing, diagnosis, and recovery) on the overall throughput and delay. Results are shown for single transient and permanent stuck-at faults on links and storage units in the switching elements. It is shown that performance degradation due to fault tolerance is graceful while performance degradation without fault recovery is unacceptable
Experimental survey of FPGA-based monolithic switches and a novel queue balancer
This paper studies small to medium-sized monolithic switches for FPGA implementation and presents a novel switch design that achieves high algorithmic performance and FPGA implementation efficiency. Crossbar switches based on virtual output queues (VOQs) and variations have been rather popular for implementing switches on FPGAs, with applications in network switches, memory interconnects, network-on-chip (NoC) routers etc. The implementation efficiency of crossbar-based switches is well-documented on ASICs, though we show that their disadvantages can outweigh their advantages on FPGAs. One of the most important challenges in such input-queued switches is the requirement for iterative scheduling algorithms. In contrast to ASICs, this is more harmful on FPGAs, as the reduced operating frequency and narrower packets cannot “hide” multiple iterations of scheduling that are required to achieve a modest scheduling performance.Our proposed design uses an output-queued switch internally for simplifying scheduling, and a queue balancing technique to avoid queue fragmentation and reduce the need for memory-sharing VOQs. Its implementation approaches the scheduling performance of a state-of-the-art FPGA-based switch, while requiring considerably fewer resources
Energy-efficient electrical and silicon-photonic networks in many core systems
Thesis (Ph.D.)--Boston UniversityDuring the past decade, the very large scale integration (VLSI) community has migrated towards incorporating multiple cores on a single chip to sustain the historic performance improvement in computing systems. As the core count continuously increases, the performance of network-on-chip (NoC), which is responsible for the communication between cores, caches and memory controllers, is increasingly becoming critical for sustaining the performance improvement. In this dissertation, we propose several methods to improve the energy efficiency of both electrical and silicon-photonic NoCs. Firstly, for electrical NoC, we propose a flow control technique, Express Virtual Channel with Taps (EVC-T), to transmit both broadcast and data packets efficiently in a mesh network. A low-latency notification tree network is included to maintain t he order of broadcast packets. The EVC-T technique improves the NoC latency by 24% and the system energy efficiency in terms of energy-delay product (EDP) by 13%. In the near future, the silicon-photonic links are projected to replace the electrical links for global on-chip communication due to their lower data-dependent power and higher bandwidth density, but the high laser power can more than offset these advantages. Therefore, we propose a silicon-photonic multi-bus NoC architecture and a methodology that can reduce the laser power by 49% on average through bandwidth reconfiguration at runtime based on the variations in bandwidth requirements of applications. We also propose a technique to reduce the laser power by dynamically activating/deactivating the 12 cache banks and switching ON/ OFF the corresponding silicon-photonic links in a crossbar NoC. This cache-reconfiguration based technique can save laser power by 23.8% and improves system EDP by 5.52% on average. In addition, we propose a methodology for placing and sharing on-chip laser sources by jointly considering the bandwidth requirements, thermal constraints and physical layout constraints. Our proposed methodology for placing and sharing of on-chip laser sources reduces laser power. In addition to reducing the laser power to improve the energy efficiency of silicon-photonic NoCs, we propose to leverage the large bandwidth provided by silicon-photonic NoC to share computing resources. The global sharing of floating-point units can save system area by 13.75% and system power by 10%
Optics and virtualization as data center network infrastructure
The emerging cloud services have motivated a fresh look at the design of data center network infrastructure in multiple layers. To transfer the huge amount of data generated by many data intensive applications, data center network has to be fast, scalable and power efficient. To support flexible and efficient sharing in cloud services, service providers deploy a virtualization layer as part of the data center infrastructure.
This thesis explores the design and performance analysis of data center network infrastructure in both physical network and virtualization layer. On the physical network design front, we present a hybrid packet/circuit switched network architecture which uses circuit switched optics to augment traditional packet-switched Ethernet in modern data centers. We show that this technique has substantial potential to improve bisection bandwidth and application performance in a cost-effective manner. To push the adoption of optical circuits in real cloud data centers, we further explore and address the circuit control issues in shared data center environments. On the virtualization layer, we present an analytical study on the network performance of virtualized data centers. Using Amazon EC2 as an experiment platform, we quantify the impact of virtualization on network performance in commercial cloud. Our findings provide valuable insights to both cloud users in moving legacy application into cloud and service providers in improving the virtualization infrastructure to support better cloud services
- …