Maximum entropy based analysis of a DS/SSMA diversity system

D.Ing.This thesis sets out to propose and analyze a cellular Direct Sequence Spread Spectrum Multiple Access (DSjSSMA) system for the Indoor Wireless Communication (IWC) Nakagami fading channel. The up- and downlink of the system implement Differential Phase Shift Keying (DPSK) and Coherent Phase Shift Keying (CPSK) as modulation schemes respectively, and are analyzed using Maximum Entropy (MaxEnt) principles due to its reliability and accuracy. As a means to enhance system capacity and performance, different forms of diversity are investigated; for the up- and downlink, respectively, RAKE reception and Maximum Ratio Combining (MRC) diversity together with Forward Error Control (FEC) coding are assumed. Further, the validity of the Gaussian Assumption (GA) is quantified and investigated under fading and non-fading conditions by calculating the missing information, using Minimum Relative Entropy (MRE) principles between the Inter- User Interference (IUI) distribution and a Gaussian distribution of equal variance

Multi-dimensional direct-sequence spread spectrum multiple-access communication with adaptive channel coding

During the race towards the4th generation (4G) cellular-based digital communication systems, a growth in the demand for high capacity, multi-media capable, improved Quality-of-Service (QoS) mobile communication systems have caused the developing mobile communications world to turn towards betterMultiple Access (MA) techniques, like Code Division Multiple Access (CDMA) [5]. The demand for higher throughput and better QoS in future 4G systems have also given rise to a scheme that is becoming ever more popular for use in these so-called ‘bandwidth-on-demand’ systems. This scheme is known as adaptive channel coding, and gives a system the ability to firstly sense changes in conditions, and secondly, to adapt to these changes, exploiting the fact that under good channel conditions, a very simple or even no channel coding scheme can be used for Forward Error Correction(FEC). This will ultimately result in better system throughput utilization. One such scheme, known as incremental redundancy, is already implemented in the Enhanced Data Rates for GSM Evolution (EDGE) standard. This study presents an extensive simulation study of a Multi-User (MU), adaptive channel coded Direct Sequence Spread Spectrum Multiple Access (DS/SSMA) communication system. This study firstly presents and utilizes a complex Base Band(BB) DS/SSMA transmitter model, aimed at user data diversity [6] in order to realize the MU input data to the system. This transmitter employs sophisticated double-sideband (DSB)Constant-Envelope Linearly Interpolated Root-of-Unity (CE-LI-RU) filtered General Chirp-Like (GCL) sequences [34, 37, 38] to band limit and spread user data. It then utilizes a fully user-definable, complex Multipath Fading Channel Simulator(MFCS), first presented by Staphorst [3], which is capable of reproducing all of the physical attributes of realistic mobile fading channels. Next, this study presents a matching DS/SSMA receiver structure that aims to optimally recover user data from the channel, ensuring the achievement of data diversity. In order to provide the basic channel coding functionality needed by the system of this study, three simple, but well-known channel coding schemes are investigated and employed. These are: binary Hamming (7,4,3) block code, (15,7,5) binary Bose-Chadhuri-Hocquenghem (BCH) block code and a rate 1/3 <i.Non-Systematic (NS) binary convolutional code [6]. The first step towards the realization of any adaptive channel coded system is the ability to measure channel conditions as fast as possible, without the loss of accuracy or inclusion of known data. In 1965, Gooding presented a paper in which he described a technique that measures communication conditions at the receiving end of a system through a device called a Performance Monitoring Unit (PMU) [12, 13]. This device accelerates the system’sBit Error Rate (BER) to a so-called Pseudo Error Rate(PER) through a process known as threshold modification. It then uses a simple PER extrapolation algorithm to estimate the system’s true BER with moderate accuracy and without the need for known data. This study extends the work of Gooding by applying his technique to the DS/SSMA system that utilizes a generic Soft-Output Viterbi Algorithm(SOVA) decoder [39] structure for the trellis decoding of the binary linear block codes [3, 41-50], as well as binary convolutional codes mentioned, over realistic MU frequency selective channel conditions. This application will grant the system the ability to sense changes in communication conditions through real-time BER measurement and, ultimately, to adapt to these changes by switching to different channel codes. Because no previous literature exists on this application, this work is considered novel. Extensive simulation results also investigate the linearity of the PER vs. modified threshold relationship for uncoded, as well as all coded cases. These simulations are all done for single, as well as multiple user systems. This study also provides extensive simulation results that investigate the calculation accuracy and speed advantages that Gooding’s technique possesses over that of the classic Monte-Carlo technique for BER estimation. These simulations also consider uncoded and coded cases, as well as single and multiple users. Finally, this study investigates the experimental real-time performance of the fully functional MU, adaptive coded, DS/SSMA communication system over varying channel conditions. During this part of the study, the channel conditions are varied over time, and the system’s adaptation (channel code switching) performance is observed through a real-time observation of the system’s estimated BER. This study also extends into cases with multiple system users. Since the adaptive coded system of this study does not require known data sequences (training sequences), inclusion of Gooding’s technique for real-time BER estimation through threshold modification and PER extrapolation in future 4G adaptive systems will enable better Quality-of-Service (QoS) management without sacrificing throughput. Furthermore, this study proves that when Gooding’s technique is applied to a coded system with a soft-output, it can be an effective technique for QoS monitoring, and should be considered in 4G systems of the future.Dissertation (MEng (Computer Engineering))--University of Pretoria, 2007.Electrical, Electronic and Computer EngineeringMEngunrestricte

Code design and analysis for multiple access communications

This thesis explores various coding aspects of multiple access communications, mainly for spread spectrum multiaccess(SSMA) communications and collaborative coding multiaccess(CCMA) communications. Both the SSMA and CCMA techniques permit efficient simultaneous transmission by several users sharing a common channel, without subdivision in time or frequency. The general principle behind these two multiaccess schemes is that one can find sets of signals (codes) which can be combined together to form a composite signal; on reception, the individual signals in the set can each be recovered from the composite signal. For the CCMA scheme, the isolation between users is based on the code structure; for the SSMA scheme, on the other hand, the isolation between users is based on the autocorrelation functions(ACFs) and crosscorrelation functions (CCFs) of the code sequences. It is clear that, in either case, the code design is the key to the system design.For the CCMA system with a multiaccess binary adder channel, a class of superimposed codes is analyzed. It is proved that every constant weight code of weight w and maximal correlation λ corresponds to a subclass of disjunctive codes of order T 3, the out-of-phase ACFs and CCFs of the codes are constant and equal to √L. In addition, all codes of the same length are mutually orthogonal.2. Maximal length sequences (m-sequences) over Gaussian integers, suitable for use with QAM modulation, are considered. Two sub-classes of m-sequences with quasi-perfect periodic autocorrelations are obtained. The CCFs between the decimated m-sequences are studied. By applying a simple operation, it is shown that some m-sequences over rational and Gaussian integers can be transformed into perfect sequences with impulsive ACFs.3. Frank codes and Chu codes have perfect periodic ACFs and optimum periodic CCFs. In addition, it is shown that they also have very favourable nonperiodic ACFs; some new results concerning the behaviour of the nonperiodic ACFs are derived. Further, it is proved that the sets of combinedFrank/Chu codes, which contain a larger number of codes than either of the two constituent sets, also have very good periodic CCFs. Based on Frank codes and Chu codes, two interesting classes of real-valued codes with good correlation properties are defined. It is shown that these codes have periodic complementary properties and good periodic and nonperiodic ACF/CCFs.Finally, a hybrid CCMA/SSMA coding scheme is proposed. This new hybrid coding scheme provides a very flexible and powerful multiple accessing capability and allows simple and efficient decoding. Given an SSMA system with K users and a CCMA system with N users, where at most T users are active at any time, then the hybrid system will have K . N users with at most T.K users active at any time. The hybrid CCMA/SSMA coding scheme is superior to the individual CCMA system or SSMA system in terms of information rate, number of users, decoding complexity and external interference rejection capability

Smart Material Wing Morphing for Unmanned Aerial Vehicles.

Morphing, or geometric adaptation to off-design conditions, has been considered in aircraft design since the Wright Brothers’ first powered flight. Decades later, smooth, bio-mimetic shape variation for control over aerodynamic forces still remains elusive. Unmanned Aerial Vehicles are prime targets for morphing implementation as they must adapt to large changes in flight conditions associated with locally varying wind or large changes in mass associated with payload delivery. The Spanwise Morphing Trailing Edge (SMTE) concept is developed to locally vary the trailing edge camber of a wing or control surface, functioning as a modular replacement for conventional ailerons without altering the wing’s spar box. The SMTE design was realized utilizing alternating active sections of Macro Fiber Composites (MFCs) driving internal elastomeric compliant mechanisms and passive sections of anisotropic, elastomeric skin with tailorable stiffness, produced by additive manufacturing. Experimental investigations of the modular design via a new scaling methodology for reduced-span test articles revealed that increased use of more MFCs within the active section did not increase aerodynamic performance due to asymmetric voltage constraints. The comparative mass and aerodynamic gains for the SMTE concept are evaluated for a representative finite wing as compared with a conventional, articulated flap wing. Informed by a simplistic system model and measured control derivatives, experimental investigations identified a reduction in the adaptive drag penalty up to 20% at off-design conditions. To investigate the potential for augmented aeroelastic performance and actuation range, a hybrid multiple-smart material morphing concept, the Synergistic Smart Morphing Aileron (SSMA), is introduced. The SSMA leverages the properties of two different smart material actuators to achieve performance exceeding that of the constituent materials. Utilizing the relatively higher work density and phase transformation of Shape-Memory Alloys combined with the larger bandwidth and conformal bending of MFCs, the resultant design is demonstrated to achieve the desired goals while providing additional control authority at stall and for unsteady conditions through synergistic use of reflex actuation. These advances highlight and motivate new morphing structures for the growing field of UAVs in which adaptation involves advanced compliance tailoring of complex geometry with synergistic actuation of embedded, smart materials.PhDAerospace EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/111533/1/alexmp_1.pd